The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for work
|
|
Workplace health and safety requirements, including personal protection needs, are observed throughout the work Completed |
Evidence:
|
Tools, machines and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition Completed |
Evidence:
|
Furniture design, tolerances, process, materials and quantities are determined from work instructions Completed |
Evidence:
|
Work sequence is planned Completed |
Evidence:
|
Procedures are determined for checking quality at each stage of the process Completed |
Evidence:
|
Suitable work area is selected for the task Completed |
Evidence:
|
Preparatory drawings/set-outs for tasks are completed where required Completed |
Evidence:
|
Complete bending and forming process
|
|
Tools, machines and equipment are used in accordance with safety requirements and manufacturers' specifications Completed |
Evidence:
|
Materials are visually inspected for flaws and faults Completed |
Evidence:
|
Cane is machine sanded to remove exterior blemishes, flaws or faults Completed |
Evidence:
|
Cane is prepared by straightening where required and marked for bending Completed |
Evidence:
|
Cane is heated in ovens in accordance with design/pattern bending requirements Completed |
Evidence:
|
Cane is bent in accordance with design/pattern requirements Completed |
Evidence:
|
Product is checked against plans at identified checkpoints to ensure compliance with specifications Completed |
Evidence:
|
Non-conformity with the required quality standards is rectified Completed |
Evidence:
|
Finalise operation
|
|
Faulty and/or defective equipment is tagged and reported in accordance with workplace practices Completed |
Evidence:
|
Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures Completed |
Evidence:
|
Off-cuts and unused materials are collected and stored for reuse or disposed of following workplace procedures Completed |
Evidence:
|
Waste and scrap materials are dealt with following workplace procedures Completed |
Evidence:
|