NTISthis.com

Evidence Guide: LMFGG2007C - Process glass by basic machines

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

LMFGG2007C - Process glass by basic machines

What evidence can you provide to prove your understanding of each of the following citeria?

Identify work requirements

  1. Work requirements, including materials, types of cuts, shapes and edges, processes and quantities required, are identified from work instructions or job order in accordance with workplace procedures
  2. Occupational health and safety (OHS) requirements, including personal protective equipment, are observed throughout the work
  3. Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, of the appropriate quality, serviceable and in a safe condition
  4. Cutting list and quality standards are determined and procedures for operation of basic cutting machines identified in accordance with workplace requirements and industry standards
  5. Glass to be cut, shaped, drilled or edged is selected using information from the work order, including type of glass, thickness, colour and dimensions
  6. Machines, equipment and settings required to perform the work are identified
Work requirements, including materials, types of cuts, shapes and edges, processes and quantities required, are identified from work instructions or job order in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Occupational health and safety (OHS) requirements, including personal protective equipment, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, of the appropriate quality, serviceable and in a safe condition

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cutting list and quality standards are determined and procedures for operation of basic cutting machines identified in accordance with workplace requirements and industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass to be cut, shaped, drilled or edged is selected using information from the work order, including type of glass, thickness, colour and dimensions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machines, equipment and settings required to perform the work are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Assessment processes and techniques must be culturally appropriate and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently:

interpret work orders and plan processing operations

identify the materials, patterns/plans, processes, machines, equipment and settings to undertake a glass cutting, drilling, shaping and/or edging task by basic machines

apply safe handling requirements for machines, equipment, products and materials, including use of personal protective equipment

apply AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass

set up for and prepare to process glass

follow work instructions, operating procedures and inspection practices to:

minimise the risk of injury to self and others

prevent damage to goods, equipment and products

maintain required production output and product quality

as a minimum:

identify and use AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass

complete straight cuts, truncated and radius corners, circles and fan holes, and pay holes by basic cutting machine in glass up to 7 mm in annealed, and laminated glass up to 1.0 m2

cut up to 7 mm annealed and laminated glass using a diamond saw

arrise, grind and polish flat, round and mitre edges on up to 7 mm annealed, and laminated glass up to 0.5 m2

drill holes with tungsten or diamond drill bits in up to 7 mm annealed, and laminated glass up to 0.5 m2

calculate the cost of glass and edgework

work effectively with others

modify activities to cater for variations in workplace contexts and environment.

Context of and specific resources for assessment

The application of competency is to be assessed in the workplace or realistically simulated workplace.

Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian Standards requirements.

The following resources should be made available:

glass sheet/product up to 7 mm thick

processing facilities/equipment (such as basic cutting and edging machines)

table

work area

work orders

appropriate safety and personal protection equipment.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of the LMF02 Furnishing Industry Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge.

Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure correct interpretation and application.

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.

Assessment may be in conjunction with assessment of other units of competency.

Guidance information for assessment

Required Skills and Knowledge

Required skills include:

collecting, organising and understanding information related to work orders, basic plans and safety procedures

using communication skills to the level required to confirm work requirements and specifications; communicate effectively regarding work requirements with supervisors, other workers and customers; report work outcomes and problems; and to relate to people from a range of social, cultural and ethnic backgrounds, and of varying physical and mental abilities

using literacy skills to the level required to understand information related to work orders, including common industry terminology, plans and safety procedures; prepare reports; and interpret technical information and specifications

planning and organising activities, including the preparation and layout of the work area, and the obtaining of equipment and materials to avoid any backtracking, workflow interruptions or wastage

working with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity

using mathematical ideas and techniques to correctly complete measurements, calculate area and weight, estimate glass requirements and minimise waste

using pre-checking and inspection techniques to anticipate processing problems, and avoid re-working and wastage

using the limited workplace technology related to the processing of glass by basic machines, including handling aids, tools, equipment, calculators and measuring devices

Required knowledge includes:

the qualities and characteristics of glass, including hazards and handling requirements

workplace safety system requirements related to glass processing by basic machines

identification of glass processing equipment, including functions and procedures

the set-up and operation of glass processing equipment, including procedures for reporting machine/product defects or equipment faults

workflow requirements in relation to glass processing

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Materials are to include, but are not limited to:

annealed and laminated glass for residential and commercial glazing and furniture applications

Workplace procedures include:

machine manufacturer specifications and operational procedures

workplace procedures relating to the setting and operation of glass cutting, drilling and edging machines

work instructions, including job sheets, cutting lists and plans

safety standards, including personal protective equipment, OHS regulations and enterprise requirements

AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass

Personal protective equipmentincludes:

that prescribed under legislation, regulation and Australian Standard policies and practices, and may include:

gloves

safety glasses

gauntlets

footwear

earmuffs

aprons and overalls

Tools and equipment may include:

flat felt covered cutting tables

tungsten wheel glass cutters

L-squares and straight edges

tape measures

glass handling gloves

safety glasses

gauntlets

aprons

marking pens

chinagraph pencils

templates and lubricants

Basic cutting machines may include, but are not limited to:

portable diamond saw

circle cutters

speed cutters

Glass is:

annealed or laminated glass less than or equal to 7 mm thick

Drilling equipment may include, but is not limited to:

portable diamond drill

wall-mounted and free-standing diamond drill presses

Edging may include:

arrising

flat

round and mitre grinding

round and mitre polishing and bevelling

Glass processing includes:

straight cutting

circle cutting

freehand cutting

drilling and edging

Edging machines may include, but are not limited to:

finishing or belt machines

diamond or pencil edgers

pumice or cork polishers

horizontal wheels

finger slotters and hand tools

Tables appropriate for cutting large glass sheets include:

air flotation tables

roller castor tables or tilt tables with air flotation

breaker bars or roller castors