The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify work requirements
|
|
Work requirements in the form of type of glass, frames and the method of fixing are identified from work instructions Completed |
Evidence:
|
Workplace health and safety requirements for fabrication and installation of commercial glazing, including personal protection needs, are identified and observed throughout the work Completed |
Evidence:
|
The process for fabricating and installing commercial glazing is identified Completed |
Evidence:
|
Prepare for work
|
|
Work sequence is planned in a logical order to suit the job Completed |
Evidence:
|
Tools, equipment and materials, other than glass and frames, are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition Completed |
Evidence:
|
Type of glass to be fitted and frames is selected to match: Completed |
Evidence:
|
customer order |
|
Completed |
Evidence:
|
requirements for security, noise or light control |
|
Completed |
Evidence:
|
Australian Standards
|
|
Glass is checked for type, size and imperfections Completed |
Evidence:
|
Glass fixing method is selected according to: Completed |
Evidence:
|
specification |
|
Completed |
Evidence:
|
type of glass and frame |
|
Completed |
Evidence:
|
security requirements |
|
Completed |
Evidence:
|
sealing methods |
|
Completed |
Evidence:
|
Identify site conditions and restraints
|
|
Site safety hazards are recognised and corrective action taken to reduce injury to self and others Completed |
Evidence:
|
Other on-site difficulties are identified and action taken to resolve in accordance with regulations and enterprise agreements Completed |
Evidence:
|
Special characteristics of the glass aperture are identified in relation to the effect of the glass fitting process on the finished job Completed |
Evidence:
|
Covering material is applied where necessary to protect existing fixtures and fittings Completed |
Evidence:
|
Prepare frame
|
|
Frame condition is assessed to ensure suitability for glazing in accordance with customer order and Australian Standards Completed |
Evidence:
|
Defective frames are reported for repair or replacement in accordance with workplace procedures Completed |
Evidence:
|
Frame is prepared (if required) to receive glass by: Completed |
Evidence:
|
cleaning |
|
Completed |
Evidence:
|
surface preparation (if required) |
|
Completed |
Evidence:
|
checking size against specification
|
|
Fixing and sealing materials are prepared by mixing or cutting to length as appropriate Completed |
Evidence:
|
Fit glass
|
|
Glass is fixed to the frame using the selected method and in accordance with recognised Australian and industry standards Completed |
Evidence:
|
Solvents and sealants are used in accordance with manufacturer recommendations and Australian Standards Completed |
Evidence:
|
Excess sealing material is removed Completed |
Evidence:
|
Glass and frame are cleaned after fixing Completed |
Evidence:
|
Complete work
|
|
Completed installation is checked to ensure compliance with customer requirements, specifications and Australian Standards Completed |
Evidence:
|
Workplace documentation is completed in accordance with workplace requirements Completed |
Evidence:
|
Work area is cleaned and left in a safe condition and rubbish removed from work area and disposed of in accordance with relevant statutory requirements and workplace requirements Completed |
Evidence:
|
Tools, equipment and materials are cleaned and stored following workplace procedures Completed |
Evidence:
|
Waste and scrap material is removed for disposal or recycling as required Completed |
Evidence:
|