NTISthis.com

Evidence Guide: LMFGG3020A - Use static machines for aluminium and uPVC chloride fabrication

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

LMFGG3020A - Use static machines for aluminium and uPVC chloride fabrication

What evidence can you provide to prove your understanding of each of the following citeria?

Identify static machines suitable for aluminium fabrication, their operation and safety requirements

  1. Types of aluminium and uPVC fabrication static machines are identified, including their purpose and limitations
  2. Applicable occupational health and safety (OHS), legislative and organisational requirements relevant to operation of static machines for aluminium and uPVC materials fabrication are verified and complied with
  3. The method of operation for static machines are identified in accordance with manufacturer operating instructions
Types of aluminium and uPVC fabrication static machines are identified, including their purpose and limitations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Applicable occupational health and safety (OHS), legislative and organisational requirements relevant to operation of static machines for aluminium and uPVC materials fabrication are verified and complied with

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

The method of operation for static machines are identified in accordance with manufacturer operating instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Assessment processes and techniques must be culturally appropriate and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently:

read and interpret work/job specifications and drawings

identify a range of aluminium and uPVC fabrication machinery detailing their uses and limitations

identify and explain the properties and limitations of aluminium and uPVC extrusions and materials

identify the likely impact of various environmental effects on machining aluminium and uPVC

machine aluminium and uPVC extrusions on a range of static machines to meet specifications

comply with legislation, regulations, standards, codes of practice and established safe practices and procedures for machining aluminium and uPVC to meet specified outcomes

communicate effectively and work safely with others in the work area.

Context of, and specific resources for assessment

The application of competency is to be assessed in the workplace or realistically simulated workplace.

Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian Standard requirements.

The following resources should be made available:

workplace location or simulated workplace

materials and equipment relevant to machining aluminium and uPVC

personal protective equipment

specifications and work instructions.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of the LMF02 Furnishing Industry Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge.

Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application.

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.

Assessment may be in conjunction with assessment of other units of competency.

Guidance information for assessment

Required Skills and Knowledge

Required skills include:

collecting, organising and understanding materials technology and information related to the machining of aluminium and uPVC

using communication skills to the level required to confirm work requirements and specifications; communicate effectively regarding work requirements with supervisors, other workers and customers; report work outcomes and problems; and relate to people from a range of social, cultural and ethnic backgrounds and of varying physical and mental abilities

using literacy skills to the level required to understand information related to work orders, including common industry terminology, plans and safety procedures; prepare reports; and interpret technical information and specifications

maintaining quality records related to the machining of aluminium and uPVC

working with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

identifying, anticipating and responding to faults in aluminium and uPVC static machines

recognising and responding to circumstances outside instructions or personal competence

planning and organising activities, including the preparation and layout of own worksite, and the obtaining and use of tools and materials to avoid any backtracking, work flow interruptions or wastage

using mathematical ideas and techniques to correctly complete measurements, calculate area and volume, and estimate work and material requirements

clarifying and confirming work instructions

planning own work within the given task parameters

accepting responsibility for given tasks

setting, monitoring and satisfying personal work goals

maintaining current knowledge of tools and material specifications used in machining of aluminium and uPVC

maintaining current knowledge of aluminium and uPVC machines and their use

seeking learning opportunities

using the workplace technology related to machining of aluminium and uPVC

Required knowledge includes:

state or territory OHS legislation, regulations, standards, codes of practice, organisational and site standards, requirements, and policies and procedures relevant to aluminium and uPVC machining terminology and techniques

types of aluminium, uPVC extrusions and other materials, their characteristics, properties, uses and limitations

environmental protection requirements relating to the disposal of waste material

established communication channels and protocols

problem identification and resolution in machining of aluminium and uPVC

storage systems and labelling

procedures for the recording, reporting and maintenance of workplace records and information

appropriate mathematical procedures for estimation and measurement

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Aluminium and uPVC fabrication static machines may include:

mitre saw:

single

double

v-notch saw

router:

single head

triple drilling

semi-automatic

variable angle end miller

beader

crimper

digital measuring system

groover:

transom

corner

reverse butt

drills:

vertical

horizontal

uPVC welder

computer numeric controlled (CNC) machines (operation only)

OHS requirementsare to be in accordance with:

Commonwealth, state or territory legislation and regulations, organisational safety policies and procedures. Requirements may include, but are not limited to:

the use of personal protective equipment and clothing

fire fighting equipment

first aid equipment

hazard and risk control and elimination of hazardous materials and substances

manual handling, including lifting and carrying

Legislative requirementsare to be in accordance with:

applicable legislation from all levels of government that affect organisational operation. Requirements may include, but are not limited to:

award and enterprise agreements

industrial relations

Australian Standards

confidentiality and privacy

OHS requirements

the environment

equal opportunity

anti-discrimination

relevant industry codes of practice

duty of care and heritage

Organisational requirementsmay include, but are not limited to:

legal, organisational and site guidelines, policies and procedures relating to own role and responsibility

quality assurance

procedural manuals

quality and continuous improvement processes and standards

OHS procedures

emergency and evacuation

ethical standards

recording and reporting

access and equity principles and practices

equipment use

maintenance and storage

environmental management (waste disposal, recycling and reuse guidelines)

Aluminium and uPVC materials for fabrication may include, but are not limited to:

extruded aluminium:

window profile

door profile

custom profile, and may be:

anodised

powder-coated

extruded uPVC:

window profile

door profile

custom profile

Manufacturer operating instructions may include:

set-up procedures

start-up and shutdown procedures

location and use of safety switches

tooling requirements

capacity and throughput

tolerances

travel

speed

operating conditions

handling and feeding of materials

safe operation, including guarding on machinery

Workplace procedures include:

workplace procedures relating to the handling and fabrication of aluminium and uPVC

work instructions, delivery dockets, job sheets and plans

workplace procedures relating to reporting and communication

safety standards, including personal protective equipment, OHS regulations and enterprise requirements

quality standards

manufacturer instructions for the use of equipment

Tools and equipmentmay include:

squares

brushes

spanners

screwdrivers

hammer

clamps

packers

wedges

measuring equipment

feeler gauges

Personal protective equipment includes:

that prescribed under legislation, regulation and enterprise policies, and may include:

hearing protection (ear plugs or muffs)

gloves

safety glasses

hard hats

safety footwear

aprons and overalls