NTISthis.com

Evidence Guide: LMFSL3005A - Fabricate and install residential lead light and stained glass windows and doors

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

LMFSL3005A - Fabricate and install residential lead light and stained glass windows and doors

What evidence can you provide to prove your understanding of each of the following citeria?

Plan to fabricate and install

  1. Applicable OHS, legislative and organisational requirements relevant to lead light and stained glass operations are verified and complied with
  2. The process for fabricating and installing lead light and stained glass windows and doors is identified
  3. Types and quantities of materials required are calculated from plans or work instructions or by measuring the fixture opening
  4. Cutting lists are prepared from plans, work instructions or measurements of opening to suit the window or door to be installed
  5. Fittings, fixings and joining devices or materials are selected
  6. Tools and equipment appropriate to the fixing method are identified
Applicable OHS, legislative and organisational requirements relevant to lead light and stained glass operations are verified and complied with

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

The process for fabricating and installing lead light and stained glass windows and doors is identified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Types and quantities of materials required are calculated from plans or work instructions or by measuring the fixture opening

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Cutting lists are prepared from plans, work instructions or measurements of opening to suit the window or door to be installed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Fittings, fixings and joining devices or materials are selected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and equipment appropriate to the fixing method are identified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare to fabricate and install

  1. Work sequence is determined in a logical order to suit the job
  2. Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
  3. Components of the lead light and stained glass window or door are checked against specifications or job order
Work sequence is determined in a logical order to suit the job

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Components of the lead light and stained glass window or door are checked against specifications or job order

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Fabricate and install

  1. Materials are cut to cutting list requirements
  2. Components of lead light and stained glass window or door are assembled
  3. Fittings are installed to window or door in accordance with workplace procedures or industry practice
  4. Window or door is installed
Materials are cut to cutting list requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Components of lead light and stained glass window or door are assembled

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Fittings are installed to window or door in accordance with workplace procedures or industry practice

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Window or door is installed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Finalise the installation

  1. Installed window or door is inspected for quality of work and repaired, re-fabricated or re-installed as required
  2. Waste and scrap material is removed for disposal/recycling as required
  3. Work area is cleaned and rubbish disposed of as appropriate
  4. Tools, equipment and unused materials are cleaned and removed and stored appropriately
  5. Workplace records are maintained
Installed window or door is inspected for quality of work and repaired, re-fabricated or re-installed as required

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Waste and scrap material is removed for disposal/recycling as required

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work area is cleaned and rubbish disposed of as appropriate

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools, equipment and unused materials are cleaned and removed and stored appropriately

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Workplace records are maintained

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Read and interpret a work/job specification

Identify a range of lead light and stained glass windows and doors detailing their uses and limitations

Identify and explain the properties of lead light and stained glass windows and doors

Identify the likely impact of various environmental effects on lead light and stained glass windows and doors

Fabricate and install residential lead light and stained glass window and residential lead light and stained glass door

Comply with legislation, regulations, standards, codes of practice and established safe practices and procedures for the fabrication and installation of lead light and stained glass windows and doors

Communicate effectively and work safely with others in the work area

Context of, and specific resources for assessment

The application of competency is to be assessed in the workplace or realistically simulated workplace

Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints

Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context

Assessment is to comply with relevant regulatory or Australian Standards requirements

The following resources should be made available:

workplace location or simulated workplace

materials and equipment relevant to fabricating and installing lead light and stained glass windows or doors

specifications and work instructions

Method of assessment

Assessment must satisfy the endorsed assessment guidelines of the Furnishing Industry Training Package

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge

Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application

Assessment may be applied under project related conditions (real or simulated) and require evidence of process

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

Assessment may be in conjunction with assessment of other units of competency

Required Skills and Knowledge

Required skills

collect, organise and understand materials technology and information related to the fabrication and installation of residential lead light and stained glass

communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems

maintain quality records related to the fabrication and installation of residential lead light and stained glass

work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

identify, anticipate and respond to faults in the fabrication and installation of residential lead light and stained glass

recognise and respond to circumstances outside instructions or personal competence

plan and organise activities including the preparation and layout of own worksite and the obtaining and use of tools and materials to avoid any backtracking, work flow interruptions or wastage

use mathematical ideas and techniques to correctly complete measurements, calculate area and volume, estimate work and material requirements

clarify and confirm work instructions

plan own work within the given task parameters

accept responsibility for given tasks

set, monitor and satisfy personal work goals

satisfy the competency requirements for the job

maintain current knowledge of tools and materials

maintain current knowledge of the fabrication and installation of residential lead light and stained glass

seek learning opportunities

use the workplace technology related to the fabrication and installation of residential lead light and stained glass including computers, measuring devices and recording systems

Required knowledge

State or Territory OHS legislation, regulations, standards and codes of practice relevant to the full range of processes for lead light and stained glass operations

lead light and stained glass windows and doors construction terminology and techniques

organisational and site standards, requirements, policies and procedures for fabrication and installation of lead light and stained glass windows and doors

types of glass and other materials used in the lead light and stained glass industry, their characteristics, properties, uses and limitations

environmental protection requirements relating to the disposal of waste material

established communication channels and protocols

problem identification and resolution

storage systems and labelling

procedures for the recording, reporting and maintenance of workplace records and information

appropriate mathematical procedures for estimation and measurement

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

OHS requirements

are to be in accordance with Commonwealth, State or Territory legislation and regulations, organisational safety policies and procedures. Requirements may include but not be limited to the use of personal protective equipment and clothing, fire fighting equipment, First Aid equipment, hazard and risk control and elimination of hazardous materials and substances, manual handling including lifting and carrying.

Legislative requirements

are to be in accordance with applicable legislation from all levels of government that affect organisational operation. Requirements may include but not be limited to award and enterprise agreements, industrial relations, Australian Standards, confidentiality and privacy, OHS, the environment, equal opportunity, anti-discrimination, relevant industry codes of practice, duty of care and heritage.

Organisational requirements

may include but not be limited to legal, organisational and site guidelines, policies and procedures relating to own role and responsibility, quality assurance, procedural manuals, quality and continuous improvement processes and standards, OHS, emergency and evacuation, ethical standards, recording and reporting, access and equity principles and practices, equipment use, maintenance and storage, environmental management (waste disposal, recycling and re-use guidelines)

Windows

may include sliding, double hung, casement and awning windows and double glazed windows

Doors

may include sliding, hinged and bi-fold doors

Materials

may include but are not limited to aluminium alloys and steel, fasteners, plastics, sealants, tapes, vinyl's, gaskets, timber reveals and flashings

may include hardware includes locks, wheels, stays, hinges, springs and balances and any component required for the operation of residential windows and doors

may include lead lighting or stained glass panels, annealed glass, safety glass, patterned glass, tinted, heat reflective and insulated glass units

Tools and equipment

may include assembly benches, drop and up-cut saws, pneumatic, hydraulic and manual presses, frame and sash tooling, copy routers, end millers, crimpers, electric and pneumatic powered drills and screwdrivers, pop rivet guns, glue guns and general hand tools

Records

may include but not be limited to the product type, size, inspection, inspection outcomes, quality outcomes and storage locations