NTISthis.com

Evidence Guide: LMTTX2002B - Prepare yarn for textile manufacturing

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

LMTTX2002B - Prepare yarn for textile manufacturing

What evidence can you provide to prove your understanding of each of the following citeria?

Set up machine and load yarn

  1. Production specifications are checked to identify requirements for yarn quantity, quality or colour.
  2. Yarn batch or job is checked to ensure conformity to specifications.
  3. Non-conforming materials are reported.
  4. Yarn is loaded onto machine.
Production specifications are checked to identify requirements for yarn quantity, quality or colour.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Yarn batch or job is checked to ensure conformity to specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Non-conforming materials are reported.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Yarn is loaded onto machine.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wind yarn onto spool, bobbin or beam, or thread yarn onto machine

  1. Machine settings are calculated and adjusted to meet production requirements.
  2. Leasing reed or other mechanisms are set according to specifications where necessary.
  3. Yarn is threaded onto machine as necessary.
  4. Machine is operated according to OHS practices.
  5. Operation and yarn are monitored.
  6. Yarn breaks are repaired where necessary.
  7. Faults are corrected where necessary to meet specified requirements and are reported.
  8. Major machine or product faults are reported.
Machine settings are calculated and adjusted to meet production requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Leasing reed or other mechanisms are set according to specifications where necessary.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Yarn is threaded onto machine as necessary.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine is operated according to OHS practices.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operation and yarn are monitored.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Yarn breaks are repaired where necessary.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faults are corrected where necessary to meet specified requirements and are reported.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Major machine or product faults are reported.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove product from machine

  1. Product is checked against quality standards.
  2. Product is unloaded or removed according to manufacturer specifications.
  3. Product is despatched to next process where necessary.
  4. Cleaning of area is completed to ensure work environment is maintained in a safe and productive manner.
Product is checked against quality standards.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Product is unloaded or removed according to manufacturer specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Product is despatched to next process where necessary.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cleaning of area is completed to ensure work environment is maintained in a safe and productive manner.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete records

  1. Production records and other documentation are accurately completed.
Production records and other documentation are accurately completed.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects of evidence to be considered

Demonstrates skills and knowledge to:

check machine settings to meet production requirements

operate and monitor machine involving defined procedures and methods

make minor adjustments

check product against quality standards

load and unload products

complete records accurately and completely

apply OHS practices in work operations

Consistency in performance

Consistently applies skills and knowledge when:

organising work

completing tasks according to instructions

working systematically with attention to detail according to instructions

identifying improvements and avoiding damage

using workplace practices

using OHS practices

recording and reporting accidents and incidents

assessing operational readiness of equipment

recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions

Resource implications

Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.

Context for assessment

Assessment may occur on the job or in an appropriately simulated environment.

Interdependent assessment

This unit may be assessed independently or in combination with other relevant units.

Required Skills and Knowledge

This describes the essential skills and knowledge and their level, required for this unit.

Demonstrates knowledge of:

procedures and guidelines for safe operation of machines

typical fault conditions and related fault finding procedures

machine maintenance and repair techniques

technical specifications manuals

quality standards and practices

OHS practices, including hazard identification and control measures

workplace practices

recording and reporting practices

Demonstrates skills to:

check machine safety equipment and report any faults

perform calculations as required

load and unload materials according to machine and workplace practices

start and stop machines according to specifications

monitor machine operations including machine production readings

recognise, rectify and report machine faults or problems as required

clean machines as required

check machine maintenance records

recognise fault conditions

confirm compliance to operational specifications

read, interpret and follow information on work specifications, standard operating procedures and work instructions, and other reference material

maintain accurate records

communicate within the workplace

sequence operations

meet specifications

clarify and check task-related information

carry out work according to OHS practices

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.

Legislative/regulatory requirements

All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.

Machines include

warping machine

beaming machine

winding machine

sizing machine

threading machine

spooling machine

knitting machine

OHS practices

OHS practices include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may relate to:

manual handling techniques

standard operating procedures

personal protective equipment

safe materials handling

taking of rest breaks

ergonomic arrangement of workplaces

following marked walkways

safe storage of equipment

housekeeping

reporting accidents and incidents

environmental practices

Machine settings may include

yarn type and quality

sections

lubrication

height

tension

speed