NTISthis.com

Evidence Guide: LMTTX2007B - Perform knitting operations

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

LMTTX2007B - Perform knitting operations

What evidence can you provide to prove your understanding of each of the following citeria?

Set up and load machine

  1. Specifications are checked to identify requirements for production.
  2. Machine settings are checked to meet product requirements.
  3. Yarns are identified, checked and loaded onto the knitting machine according to manufacturer specifications.
  4. Non-conforming materials are reported.
  5. Area around machine is kept clean during setting and loading.
Specifications are checked to identify requirements for production.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine settings are checked to meet product requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Yarns are identified, checked and loaded onto the knitting machine according to manufacturer specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Non-conforming materials are reported.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Area around machine is kept clean during setting and loading.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operate and monitor machine

  1. Knitting machine is started and stopped according to manufacturer requirements and OHS practices.
  2. Machine is monitored to ensure correct operation.
  3. Yarn supply is checked and replaced to ensure continuous flow to machine.
  4. Waste is sorted.
  5. Minor product process and machine faults are identified, corrected and reported.
  6. Major machine faults are reported.
Knitting machine is started and stopped according to manufacturer requirements and OHS practices.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine is monitored to ensure correct operation.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Yarn supply is checked and replaced to ensure continuous flow to machine.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste is sorted.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Minor product process and machine faults are identified, corrected and reported.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Major machine faults are reported.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check product quality

  1. Product is checked against quality standards.
  2. Product is assessed for faults and non-conformances.
  3. Product faults are rectified or reported.
Product is checked against quality standards.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Product is assessed for faults and non-conformances.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Product faults are rectified or reported.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete knitting process

  1. Product is unloaded or removed according to manufacturer specifications.
  2. Product is despatched to next process.
  3. Cleaning of area is completed to ensure work environment is maintained in a safe and productive manner.
  4. Production records and other documentation are accurately completed.
Product is unloaded or removed according to manufacturer specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Product is despatched to next process.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cleaning of area is completed to ensure work environment is maintained in a safe and productive manner.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Production records and other documentation are accurately completed.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects of evidence to be considered

Demonstrates skills and knowledge to:

check machine settings to meet production requirements

monitor knitting machine according to defined procedures and methods

make minor adjustments

check product against quality standards

load and unload products according to workplace practices

complete records accurately and completely

apply OHS practices in work operations

Consistency in performance

Consistently applies skills and knowledge when:

organising work

completing tasks according to instructions

working systematically with attention to detail according to instructions

identifying improvements and avoiding damage

using workplace practices

using OHS practices

recording and reporting accidents and incidents

assessing operational readiness of equipment

recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions

Resource implications

Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.

Context for assessment

Assessment may occur on the job or in an appropriately simulated environment.

Interdependent assessment

This unit may be assessed independently or in combination with other relevant units.

Required Skills and Knowledge

This describes the essential skills and knowledge and their level

Demonstrates knowledge of:

procedures and guidelines for safe operation of knitting machine

typical fault conditions and related fault finding procedures

types and styles of yarns used in knitted products

machine maintenance and repair techniques

technical specifications manuals

quality standards and practices

OHS practices, including hazard identification and control measures

workplace practices

recording and reporting practices

Demonstrates skills to:

check machine safety equipment and report any faults

start and stop machines according to specifications

recognise, rectify and report machine faults or problems

clean machines as required

check machine maintenance records

recognise fault conditions

confirm compliance to operational specifications

read, interpret and follow information on work specifications, standard operating procedures and work instructions, and other reference material

maintain accurate records

communicate within the workplace

sequence operations

meet specifications

clarify and check task-related information

carry out work according to OHS practices

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.

Legislative/regulatory requirements

All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.

Product requirements may include

flat knitting

circular knitting

colour

pattern

size

stitch gauge

tension

weft knits

warp knits

plain, purl, double, tricot knit

sock knitting

full garment

Yarns may be

wool

nylon

acrylic

polypropylene

polyester

cotton

viscose

blends

OHS practices

OHS practices include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may relate to:

manual handling techniques

standard operating procedures

personal protective equipment

safe materials handling

taking of rest breaks

ergonomic arrangement of workplaces

following marked walkways

safe storage of equipment

housekeeping

reporting accidents and incidents

environmental practices

Faults may include

holes

foreign matter

creasing

lines

runs