NTISthis.com

Evidence Guide: MARB016 - Contribute to routine engine maintenance on a vessel

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MARB016 - Contribute to routine engine maintenance on a vessel

What evidence can you provide to prove your understanding of each of the following citeria?

Plan engine maintenance tasks

  1. Planned maintenance system is accessed to establish engine maintenance requirements for vessel
  2. Maintenance tasks are proposed and prioritised in conjunction with others involved in or affected by the maintenance work
  3. Resource requirements are identified and accessed to ensure efficient completion of tasks
  4. Maintenance tasks are recorded in the maintenance schedule according to organisational procedures
Planned maintenance system is accessed to establish engine maintenance requirements for vessel

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Maintenance tasks are proposed and prioritised in conjunction with others involved in or affected by the maintenance work

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Resource requirements are identified and accessed to ensure efficient completion of tasks

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Maintenance tasks are recorded in the maintenance schedule according to organisational procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare for engine service

  1. Nature and scope of work requirements are confirmed according to organisational procedures
  2. Service procedures, workshop manuals and manufacturer specifications are accessed and interpreted
  3. Tools, equipment and materials required for servicing are identified and prepared
  4. Engine and components are visually inspected for external signs of defects according to maintenance documentation
  5. Electrical components are identified and electrical equipment is used safely
  6. Engine is started, ran up to operating temperature and checked for leaks, abnormal noises and pressures
  7. Test results are compared with manufacturer/component supplier specifications to determine compliance or non-compliance
  8. Results are documented with supporting information and recommendations are made about serviceability and repair
Nature and scope of work requirements are confirmed according to organisational procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Service procedures, workshop manuals and manufacturer specifications are accessed and interpreted

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials required for servicing are identified and prepared

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Engine and components are visually inspected for external signs of defects according to maintenance documentation

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Electrical components are identified and electrical equipment is used safely

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Engine is started, ran up to operating temperature and checked for leaks, abnormal noises and pressures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Test results are compared with manufacturer/component supplier specifications to determine compliance or non-compliance

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Results are documented with supporting information and recommendations are made about serviceability and repair

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Service engines and engine components

  1. Work health and safety (WHS)/occupational health and safety (OHS) requirements are identified and observed
  2. Service operations are performed according to organisational procedures manufacturer/component supplier specifications
  3. Fluid level checks and replenishments are carried out according to manufacturer/component supplier specifications
  4. Appropriate lubricants are applied to engine
  5. Equipment/components requiring replacement are changed according to manufacturer/component supplier specifications
  6. Adjustments are made according to manufacturer/component supplier specifications
Work health and safety (WHS)/occupational health and safety (OHS) requirements are identified and observed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Service operations are performed according to organisational procedures manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Fluid level checks and replenishments are carried out according to manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Appropriate lubricants are applied to engine

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Equipment/components requiring replacement are changed according to manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Adjustments are made according to manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete work

  1. Engine is inspected to ensure protective guards, cowlings and safety features are in place
  2. Engine is cleaned according to organisational procedures
  3. Materials to be reused are collected and stored according to manufacturer specifications and organisational procedures
  4. Tools and equipment are cleaned, maintained and stored according to manufacturer specifications and organisational procedures
  5. Waste and scrap are removed according to legislative requirements and organisational procedures
  6. Unserviceable equipment is tagged and faults are identified and reported according to organisational procedures
Engine is inspected to ensure protective guards, cowlings and safety features are in place

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Engine is cleaned according to organisational procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Materials to be reused are collected and stored according to manufacturer specifications and organisational procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and equipment are cleaned, maintained and stored according to manufacturer specifications and organisational procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Waste and scrap are removed according to legislative requirements and organisational procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Unserviceable equipment is tagged and faults are identified and reported according to organisational procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan engine maintenance tasks

1.1

Planned maintenance system is accessed to establish engine maintenance requirements for vessel

1.2

Maintenance tasks are proposed and prioritised in conjunction with others involved in or affected by the maintenance work

1.3

Resource requirements are identified and accessed to ensure efficient completion of tasks

1.4

Maintenance tasks are recorded in the maintenance schedule according to organisational procedures

2

Prepare for engine service

2.1

Nature and scope of work requirements are confirmed according to organisational procedures

2.2

Service procedures, workshop manuals and manufacturer specifications are accessed and interpreted

2.3

Tools, equipment and materials required for servicing are identified and prepared

2.4

Engine and components are visually inspected for external signs of defects according to maintenance documentation

2.5

Electrical components are identified and electrical equipment is used safely

2.6

Engine is started, ran up to operating temperature and checked for leaks, abnormal noises and pressures

2.7

Test results are compared with manufacturer/component supplier specifications to determine compliance or non-compliance

2.8

Results are documented with supporting information and recommendations are made about serviceability and repair

3

Service engines and engine components

3.1

Work health and safety (WHS)/occupational health and safety (OHS) requirements are identified and observed

3.2

Service operations are performed according to organisational procedures manufacturer/component supplier specifications

3.3

Fluid level checks and replenishments are carried out according to manufacturer/component supplier specifications

3.4

Appropriate lubricants are applied to engine

3.5

Equipment/components requiring replacement are changed according to manufacturer/component supplier specifications

3.6

Adjustments are made according to manufacturer/component supplier specifications

4

Complete work

4.1

Engine is inspected to ensure protective guards, cowlings and safety features are in place

4.2

Engine is cleaned according to organisational procedures

4.3

Materials to be reused are collected and stored according to manufacturer specifications and organisational procedures

4.4

Tools and equipment are cleaned, maintained and stored according to manufacturer specifications and organisational procedures

4.5

Waste and scrap are removed according to legislative requirements and organisational procedures

4.6

Unserviceable equipment is tagged and faults are identified and reported according to organisational procedures

Required Skills and Knowledge

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan engine maintenance tasks

1.1

Planned maintenance system is accessed to establish engine maintenance requirements for vessel

1.2

Maintenance tasks are proposed and prioritised in conjunction with others involved in or affected by the maintenance work

1.3

Resource requirements are identified and accessed to ensure efficient completion of tasks

1.4

Maintenance tasks are recorded in the maintenance schedule according to organisational procedures

2

Prepare for engine service

2.1

Nature and scope of work requirements are confirmed according to organisational procedures

2.2

Service procedures, workshop manuals and manufacturer specifications are accessed and interpreted

2.3

Tools, equipment and materials required for servicing are identified and prepared

2.4

Engine and components are visually inspected for external signs of defects according to maintenance documentation

2.5

Electrical components are identified and electrical equipment is used safely

2.6

Engine is started, ran up to operating temperature and checked for leaks, abnormal noises and pressures

2.7

Test results are compared with manufacturer/component supplier specifications to determine compliance or non-compliance

2.8

Results are documented with supporting information and recommendations are made about serviceability and repair

3

Service engines and engine components

3.1

Work health and safety (WHS)/occupational health and safety (OHS) requirements are identified and observed

3.2

Service operations are performed according to organisational procedures manufacturer/component supplier specifications

3.3

Fluid level checks and replenishments are carried out according to manufacturer/component supplier specifications

3.4

Appropriate lubricants are applied to engine

3.5

Equipment/components requiring replacement are changed according to manufacturer/component supplier specifications

3.6

Adjustments are made according to manufacturer/component supplier specifications

4

Complete work

4.1

Engine is inspected to ensure protective guards, cowlings and safety features are in place

4.2

Engine is cleaned according to organisational procedures

4.3

Materials to be reused are collected and stored according to manufacturer specifications and organisational procedures

4.4

Tools and equipment are cleaned, maintained and stored according to manufacturer specifications and organisational procedures

4.5

Waste and scrap are removed according to legislative requirements and organisational procedures

4.6

Unserviceable equipment is tagged and faults are identified and reported according to organisational procedures

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements and work practices

assisting in maintaining and servicing marine:

cooling systems/components

batteries

engine mounting systems/components

exhaust systems/components

fuel systems/components

intake systems/components

lubrication systems/components

communicating with other personnel using effective:

listening techniques

questioning to confirm understanding

verbal and non-verbal language

confirming maintenance to be undertaken and identifying resource requirements with the officer in charge of the engineering watch

ensuring behaviour reflects relevant current legislative and regulatory requirements

ensuring currency of relevant WHS/OHS skills and knowledge

identifying hazards and safety issues and reporting these to the engineering officer of the watch

identifying tools, equipment and materials required to undertake maintenance tasks

using electrical equipment safely and applying:

correct emergency procedures

different voltages in use on board

isolation procedures

precautions to prevent electric shock

safety precautions before commencing work

using painting, lubrication and cleaning materials, and equipment safely.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

basic electrical principles covering voltage, current, resistance, power, magnetic and inductance

basic mechanical principles covering the concepts of mechanical, hydraulic and pneumatic systems

causes of electric shock and precautions to be observed to prevent shock

engine room cleaning procedure and relevant cleaning agents

engine room hazards and safety including:

electrical safety

gas testing

head of water/fluid

heat stress

high pressures

hot fluids

mechanical safety

noise

pollution

steam

toxic gases

ventilation

vibration

engine room machinery and equipment including:

air compressors

air start systems

bilge system, bilge pumps, bilge pick ups, bilge valves, bilge piping

engine protection devices (crankcase mist detectors)

hydraulic systems, power packs, rams and motors, directional control valves (DCVs)

oily water separators

pumps – positive displacement, centrifugal, axial flow

purifiers and clarifiers

refrigeration and air-conditioning plant

sewage treatment plant

slow speed, medium speed and high speed diesels

steering systems

osmosis plant

valves – globe and full flow, screw down non return, screw lift, butterfly, ball, relief, non-return, gate

water making (both fresh water generators and reverse)

manufacturer safety guidelines and shipboard instructions

purpose of isolation procedures and application of lock out tags

rights and responsibilities of individuals about lock out and tagging of plant and equipment

relevant WHS/OHS requirements, work practices and pollution control regulations and policies

routine maintenance and repair procedures

safe disposal of waste materials

surface preparation techniques, including:

abrasive blast cleaning

flame cleaning

hand and power tool cleaning

types, functions and limitations of marine:

cooling systems/components

engines

engine mounting systems/components

exhaust systems/components

fuel systems/components

intake systems/components

lubrication systems/components.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions can be found in the Companion Volume Implementation Guide.

Maintenance tasks include one or more of the following:

economiser cleaning

engine room rounds (daily/weekly/monthly maintenance checks)

greasing and oiling of machinery

inspection and maintenance of:

hatches, watertight doors ports and deadlights

hoists and lifting equipment

routine inspection of hand and power tools, measuring instruments and machinery tools

safe disposal of waste materials

scavenge space cleaning

soot blowing

surface preparation and painting