NTISthis.com

Evidence Guide: MARC4004A - Operate deck machinery and steering gear on a vessel up to 80 metres

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MARC4004A - Operate deck machinery and steering gear on a vessel up to 80 metres

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for operation

  1. Routine pre-operational checks of steering gear or deck machinery are completed prior to use according to manufacturer specifications and organisational procedures
  2. Equipment is set up
  3. Tools and equipment appropriate to work requirements are selected, checked for safety and set up for operation
  4. Equipment faults or malfunctions are identified and reported according to organisational procedures
  5. Work health and safety (WHS)/occupational health and safety (OHS) hazards in the work area are identified, and risks are assessed and reported according to organisational procedures
Routine pre-operational checks of steering gear or deck machinery are completed prior to use according to manufacturer specifications and organisational procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is set up

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment appropriate to work requirements are selected, checked for safety and set up for operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment faults or malfunctions are identified and reported according to organisational procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS)/occupational health and safety (OHS) hazards in the work area are identified, and risks are assessed and reported according to organisational procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operate steering gear and deck machinery

  1. Suitable personal protective equipment is selected and used according to organisational procedures
  2. Steering gear and deck machinery are operated in a safe and controlled manner
  3. Performance and efficiency of steering gear and deck machinery operations is monitored
  4. Safe operational practices are used to anticipate and control hazards
  5. Adverse sea and weather conditions which may impact on the operation of steering gear and deck machinery are identified and operational practices are adjusted to maintain safety of vessel and personnel
Suitable personal protective equipment is selected and used according to organisational procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Steering gear and deck machinery are operated in a safe and controlled manner

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Performance and efficiency of steering gear and deck machinery operations is monitored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safe operational practices are used to anticipate and control hazards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adverse sea and weather conditions which may impact on the operation of steering gear and deck machinery are identified and operational practices are adjusted to maintain safety of vessel and personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete operations

  1. Shut-down procedures are conducted according to manufacturer instructions and organisational procedures
  2. Malfunctions, faults, irregular performance or damage to steering gear and deck machinery are reported according to organisational procedures
  3. Steering gear and deck machinery is cleaned and secured according to organisational procedures
  4. Operational records are completed according to organisational procedures
Shut-down procedures are conducted according to manufacturer instructions and organisational procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Malfunctions, faults, irregular performance or damage to steering gear and deck machinery are reported according to organisational procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Steering gear and deck machinery is cleaned and secured according to organisational procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operational records are completed according to organisational procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, the required skills and knowledge, the range statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the Elements, Performance Criteria, Required Skills, Required Knowledge and include:

communicating effectively with others

providing the required amount of detail in reports

attention to appropriate level of detail in recordkeeping.

Context of and specific resources for assessment

Performance is demonstrated consistently over time and in a suitable range of contexts.

Resources for assessment include access to:

industry-approved marine operations site where operating steering gear and deck machinery on a vessel up to 80 metres may be conducted

tools, equipment and personal protective equipment currently used in industry

relevant regulatory and equipment documentation that impacts on work activities

range of relevant exercises, case studies and/or other simulated practical and knowledge assessments

appropriate range of relevant operational situations in the workplace.

In both real and simulated environments, access is required to:

relevant and appropriate materials and equipment

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals.

Method of assessment

Practical assessment must occur in an:

appropriately simulated workplace environment and/or

appropriate range of situations in the workplace.

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate to this unit:

direct observation of the candidate operating steering gear and deck machinery on a vessel up to 80 metres

direct observation of the candidate applying relevant WHS/OHS requirements and work practices.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.

In all cases where practical assessment is used it should be combined with targeted questioning to assess Required Knowledge.

Assessment processes and techniques must be appropriate to the language and literacy requirements of the work being performed and the capacity of the candidate.

Required Skills and Knowledge

Required Skills:

Complete required records relating to the operation of steering gear and deck machinery

Follow work schedules laid down in organisational instructions and safety management systems

Initiate and operate emergency steering systems

Read, interpret and apply instructions on the operation of steering gear and deck machinery

Recognise faulty equipment and take appropriate action

Recognise routine hazards and problems while operating steering gear and deck machinery

Select and use relevant tools and equipment

Work safely and collaboratively with others when operating and maintaining deck machinery and steering gear

Required Knowledge:

Basic principles of hydraulics

Communication techniques and signals needed during the operation of steering gear and deck machinery on vessels up to 80 metres

Principal features and operating characteristics of steering gear and deck machinery used on vessels up to 80 metres

Problems related to the operation of steering gear and deck machinery and appropriate actions and solutions

Procedures for checking and inspecting steering gear and deck machinery used on vessels up to 80 metres

Procedures for the safe operation of steering gear and deck machinery

Procedures for, and operation of, emergency steering systems

Records that must be maintained on a vessel up to 80 metres

Relevant state and territory maritime WHS/OHS and pollution control regulations and policies

Safety, environmental and hazard control precautions and procedures relevant to the operation of steering gear and deck machinery

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below.

Steering gear or deck machinery may include:

Basic hydraulic systems

Cranes

Emergency steering gear

Fishing gear

Steering gear

Winches and capstans

Windlass

Tools and equipment may include:

Greasing and lubrication tools

Hand and power tools, including screwdrivers, drills, grinders, spanners, wrenches, wire cutters

Protective clothing and equipment