NTISthis.com

Evidence Guide: MARL6013A - Demonstrate intermediate knowledge of marine control systems and automation

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MARL6013A - Demonstrate intermediate knowledge of marine control systems and automation

What evidence can you provide to prove your understanding of each of the following citeria?

Analyse open and closed loop systems

  1. Open loop systems are distinguished from closed loop systems
  2. Closed loop manual, time based automatic open loop and feed forward open loop are explained
Open loop systems are distinguished from closed loop systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Closed loop manual, time based automatic open loop and feed forward open loop are explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Explain principles and operation of

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

pneumatic control element and systems

  1. Operation of a nozzle flapper and pneumatic amplifier unit is analysed and applied to transmitters, basic controllers and valve positioners
  2. Control air supply system is defined
  3. Principle of operation of direct and reverse acting pneumatic relays and application is clarified
  4. Application of computing relays is analysed
Operation of a nozzle flapper and pneumatic amplifier unit is analysed and applied to transmitters, basic controllers and valve positioners

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Control air supply system is defined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Principle of operation of direct and reverse acting pneumatic relays and application is clarified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Application of computing relays is analysed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Compare temperature transmitters

  1. Pneumatic temperature transmitter is defined
  2. Effect of changes in ambient temperature on thermocouples and RTDs is explained
  3. Testing procedures and methods of simulation for both RTDs and thermocouples are explained
  4. Characteristics and application of thermistors are outlined
Pneumatic temperature transmitter is defined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Effect of changes in ambient temperature on thermocouples and RTDs is explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Testing procedures and methods of simulation for both RTDs and thermocouples are explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Characteristics and application of thermistors are outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Analyse application of differential pressure

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

transmitters

  1. Application of differential pressure transmitters on board ships is confirmed
  2. Arrangements of differential pressure transmitters for measurement of liquid levels in both closed and open tanks are explained
  3. Mechanics for viscosity measurement using a differential pressure transmitter are analysed
  4. Principle of using a differential pressure transmitter for flow measurement and the need for a square root extractor is explained
  5. Use of a differential pressure transmitter for flow measurement is compared and contrasted with other types of meters
Application of differential pressure transmitters on board ships is confirmed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Arrangements of differential pressure transmitters for measurement of liquid levels in both closed and open tanks are explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mechanics for viscosity measurement using a differential pressure transmitter are analysed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Principle of using a differential pressure transmitter for flow measurement and the need for a square root extractor is explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use of a differential pressure transmitter for flow measurement is compared and contrasted with other types of meters

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Explain engine room monitoring systems

  1. Application of different speed sensing systems is analysed
  2. Operating principles of torque monitoring systems applied to propeller shafting are explained
  3. Arrangements of shaft power and indicated power monitoring are compared
  4. Horizontal and vertical float level systems are compared with other tank level monitoring system in common use
  5. Operating principle of oil-water interface sensor is explained
  6. Methods of bearing temperature monitoring applied to diesel engine rotating parts are outlined
  7. Machinery space monitoring and alarm system from a central control room are outlined
Application of different speed sensing systems is analysed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operating principles of torque monitoring systems applied to propeller shafting are explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Arrangements of shaft power and indicated power monitoring are compared

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Horizontal and vertical float level systems are compared with other tank level monitoring system in common use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operating principle of oil-water interface sensor is explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Methods of bearing temperature monitoring applied to diesel engine rotating parts are outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machinery space monitoring and alarm system from a central control room are outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Explain procedure for transmitter calibration

  1. Procedure for transmitter calibration for both pneumatic and electronic transmitters is applied
  2. Test equipment is used for transmitter calibration
  3. Relationship between process variables and output signals is demonstrated in a graph
  4. Effects of transmitter dead band are defined
Procedure for transmitter calibration for both pneumatic and electronic transmitters is applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test equipment is used for transmitter calibration

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Relationship between process variables and output signals is demonstrated in a graph

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Effects of transmitter dead band are defined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Explain operation of pneumatic 3term controller and controller adjustment procedures

  1. Common controller actions and applications are outlined
  2. Operating principle of pneumatic 3term controllers is outlined
  3. Procedure for adjusting 3term pneumatic controllers is applied and effects if incorrectly adjustment are explained
  4. Typical controller settings for a PID controller are detailed
  5. Integrated hand/auto station and 3term controller are outlined and bumpless transfer is demonstrated
Common controller actions and applications are outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operating principle of pneumatic 3term controllers is outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Procedure for adjusting 3term pneumatic controllers is applied and effects if incorrectly adjustment are explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Typical controller settings for a PID controller are detailed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Integrated hand/auto station and 3term controller are outlined and bumpless transfer is demonstrated

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Explain actuators and control valves

  1. Arrangements to provide fail safe requirements are outlined
  2. Control valve and actuator are explained
  3. Different types of actuators are identified
  4. Operating principle of pneumatic valve positioners is explained
Arrangements to provide fail safe requirements are outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Control valve and actuator are explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Different types of actuators are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operating principle of pneumatic valve positioners is explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Analyse operation of hydraulic governors

  1. Operating principle of proportional action hydraulic governors is explained
  2. Importance of spring stiffness in relation to response is clarified
  3. Purpose of an isochronous governor is outlined
  4. Principle of operation of an isochronous hydraulic governor is outlined
  5. Governor droop and its requirements for stable load sharing and engine stability is explained
Operating principle of proportional action hydraulic governors is explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Importance of spring stiffness in relation to response is clarified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Purpose of an isochronous governor is outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Principle of operation of an isochronous hydraulic governor is outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Governor droop and its requirements for stable load sharing and engine stability is explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Interpret electronic systems circuit diagrams

  1. Electrical symbols commonly used in electronic circuits and sub-circuits are defined
  2. Printed and colour codes used in electronic circuits are defined
  3. Operation and maintenance manuals commonly used in the fault finding electronic circuits are used correctly
Electrical symbols commonly used in electronic circuits and sub-circuits are defined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Printed and colour codes used in electronic circuits are defined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operation and maintenance manuals commonly used in the fault finding electronic circuits are used correctly

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Explain basic operation of programmable logic controllers

  1. Principles and operation of integrated circuit gates are explained
  2. Operational function of input/output devices connected to a digital programmable logic controller is detailed
  3. Methods of operation of flip flops, adders, counters, multiplexers and decoders are outlined
  4. Methods employed when changing set point values in a digital programmable logic controller are outlined
Principles and operation of integrated circuit gates are explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operational function of input/output devices connected to a digital programmable logic controller is detailed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Methods of operation of flip flops, adders, counters, multiplexers and decoders are outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Methods employed when changing set point values in a digital programmable logic controller are outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Explain typical machinery space control loops and unmanned machinery spaces requirements

  1. Fuel oil heating, LO cooling and JW cooling loop showing cascade and split range systems are outlined
  2. Fuel oil viscosity control loop is outlined
  3. Common methods of boiler water control and simple combustion control with burner management for an auxiliary boiler are outlined
  4. Requirements and system arrangements for bridge control of main propulsion machinery including change over from local to bridge are explained
  5. Common pressure control loops found in a ship’s engine room are identified
  6. Unmanned machinery spaces (UMS) requirements are outlined
  7. Troubleshooting procedures associated with control systems are outlined
  8. Procedures for software version control are outlined
Fuel oil heating, LO cooling and JW cooling loop showing cascade and split range systems are outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fuel oil viscosity control loop is outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Common methods of boiler water control and simple combustion control with burner management for an auxiliary boiler are outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Requirements and system arrangements for bridge control of main propulsion machinery including change over from local to bridge are explained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Common pressure control loops found in a ship’s engine room are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unmanned machinery spaces (UMS) requirements are outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Troubleshooting procedures associated with control systems are outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Procedures for software version control are outlined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, the required skills and knowledge, the range statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the Elements, Performance Criteria, Required Skills, Required Knowledge and include:

providing accurate and reliable information

providing appropriate level of detail in responses.

Context of and specific resources for assessment

Performance is demonstrated consistently over time and in a suitable range of contexts.

Resources for assessment include access to:

industry-approved marine operations site where intermediate knowledge of marine control systems and automation can be demonstrated

technical reference library with current publications on automation and process control

tools, equipment and personal protective equipment currently used in industry

relevant regulatory and equipment documentation that impacts on work activities

range of relevant exercises, case studies and/or other simulated practical and knowledge assessments

appropriate range of relevant operational situations in the workplace.

In both real and simulated environments, access is required to:

relevant and appropriate materials and equipment

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals.

Method of assessment

Practical assessment must occur in an:

appropriately simulated workplace environment and/or

appropriate range of situations in the workplace.

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate to this unit:

direct observation of the candidate demonstrating intermediate knowledge of marine control systems and automation

direct observation of the candidate applying relevant WHS/OHS requirements and work practices.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.

In all cases where practical assessment is used it should be combined with targeted questioning to assess Required Knowledge.

Assessment processes and techniques must be appropriate to the language and literacy requirements of the work being performed and the capacity of the candidate.

Required Skills and Knowledge

Required Skills:

Access information and sketch diagrams to interpret and explain testing requirements related to control systems on commercial vessels

Assess own work outcomes and maintain knowledge of current codes, standards, regulations and industry practices

Explain principles of marine automation and process control

Identify and interpret numerical and graphical information, including schematic diagrams, relevant to control systems on commercial vessels

Identify and suggest ways of rectifying faults and malfunctions in control systems on commercial vessels

Identify methods, procedures and materials needed to operate and maintain control systems on commercial vessels

Impart knowledge and ideas through verbal, written and visual means

Read and interpret written information related to operate control systems on commercial vessels

Required Knowledge:

Actuators and control valves

Australian standards for drawing symbols/layouts for schematic diagrams

Bridge control systems

Concepts of UMS and automated monitoring and control of machinery

Control and monitoring of ship machinery

Differential pressure transmitters

Electronic systems circuit diagrams

Engine room monitoring systems

Machinery space control loops and UMS requirements

Mechanical and electrical sensors

Open and closed loop systems

Operation of hydraulic governors

Operation of pneumatic 3-term controller and controller adjustment procedures

Operation of programmable logic controllers

Pneumatic and electrical instrumentation transmitters

Principles and operation of pneumatic control element and systems

Principles of basic pneumatic systems and action of pneumatic instruments

Principles of process control

Temperature transmitters

Tests and procedures required to meet UMS requirements

Total bridge control

Transmitter calibration

Work health and safety (WHS)/occupational health and safety (OHS) legislation, policies and procedures

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below.

Meters may include:

Area meter

Rotometer

Target meter

Types of actuators may include:

Electric

Hydraulic

Pneumatic