NTISthis.com

Evidence Guide: MEA235 - Perform advanced troubleshooting in aircraft avionic maintenance

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MEA235 - Perform advanced troubleshooting in aircraft avionic maintenance

What evidence can you provide to prove your understanding of each of the following citeria?

Verify the defect

  1. Available information from flight crew, such as flight phase, aircraft configuration etc., and maintenance documentation both current and previous history, are used as necessary, to assist in fault determination
  2. Inspection of the affected system is carried out to check both physical integrity and correct operation
  3. Information gained from Central Maintenance Systems is verified against physical integrity and correct operation, where applicable
  4. The effects on a system from interfaces/integration with other systems are taken into account
Available information from flight crew, such as flight phase, aircraft configuration etc., and maintenance documentation both current and previous history, are used as necessary, to assist in fault determination

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection of the affected system is carried out to check both physical integrity and correct operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Information gained from Central Maintenance Systems is verified against physical integrity and correct operation, where applicable

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

The effects on a system from interfaces/integration with other systems are taken into account

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Isolate the defect

  1. Logical processes, including the application of basic principles and system knowledge and known facts, are used to augment maintenance manual fault diagnosis guides to ensure efficient and accurate troubleshooting
  2. Specialist advice is obtained, where required and/or available, to assist with the troubleshooting process
  3. Faults are located and the causes of the defects are clearly identified and correctly recorded in maintenance documentation, including any other systems disturbed, where required
Logical processes, including the application of basic principles and system knowledge and known facts, are used to augment maintenance manual fault diagnosis guides to ensure efficient and accurate troubleshooting

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Specialist advice is obtained, where required and/or available, to assist with the troubleshooting process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faults are located and the causes of the defects are clearly identified and correctly recorded in maintenance documentation, including any other systems disturbed, where required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Determine defect rectification requirements

  1. Defect rectification requirements are determined and the necessary repair action initiated once verification and isolation of the defect are confirmed
Defect rectification requirements are determined and the necessary repair action initiated once verification and isolation of the defect are confirmed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Verify defect rectification

  1. Defect is rectified in accordance with approved maintenance data
  2. All systems disturbed or accessed during troubleshooting are restored as applicable using maintenance manuals, repair schemes or approved maintenance data
  3. All checks required by approved maintenance data to ensure correct operation of all disturbed systems are performed
Defect is rectified in accordance with approved maintenance data

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

All systems disturbed or accessed during troubleshooting are restored as applicable using maintenance manuals, repair schemes or approved maintenance data

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

All checks required by approved maintenance data to ensure correct operation of all disturbed systems are performed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1.

Verify the defect

1.1

Available information from flight crew, such as flight phase, aircraft configuration etc., and maintenance documentation both current and previous history, are used as necessary, to assist in fault determination

1.2

Inspection of the affected system is carried out to check both physical integrity and correct operation

1.3

Information gained from Central Maintenance Systems is verified against physical integrity and correct operation, where applicable

1.4

The effects on a system from interfaces/integration with other systems are taken into account

2.

Isolate the defect

2.1

Logical processes, including the application of basic principles and system knowledge and known facts, are used to augment maintenance manual fault diagnosis guides to ensure efficient and accurate troubleshooting

2.2

Specialist advice is obtained, where required and/or available, to assist with the troubleshooting process

2.3

Faults are located and the causes of the defects are clearly identified and correctly recorded in maintenance documentation, including any other systems disturbed, where required

3.

Determine defect rectification requirements

3.1

Defect rectification requirements are determined and the necessary repair action initiated once verification and isolation of the defect are confirmed

4.

Verify defect rectification

4.1

Defect is rectified in accordance with approved maintenance data

4.2

All systems disturbed or accessed during troubleshooting are restored as applicable using maintenance manuals, repair schemes or approved maintenance data

4.3

All checks required by approved maintenance data to ensure correct operation of all disturbed systems are performed

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1.

Verify the defect

1.1

Available information from flight crew, such as flight phase, aircraft configuration etc., and maintenance documentation both current and previous history, are used as necessary, to assist in fault determination

1.2

Inspection of the affected system is carried out to check both physical integrity and correct operation

1.3

Information gained from Central Maintenance Systems is verified against physical integrity and correct operation, where applicable

1.4

The effects on a system from interfaces/integration with other systems are taken into account

2.

Isolate the defect

2.1

Logical processes, including the application of basic principles and system knowledge and known facts, are used to augment maintenance manual fault diagnosis guides to ensure efficient and accurate troubleshooting

2.2

Specialist advice is obtained, where required and/or available, to assist with the troubleshooting process

2.3

Faults are located and the causes of the defects are clearly identified and correctly recorded in maintenance documentation, including any other systems disturbed, where required

3.

Determine defect rectification requirements

3.1

Defect rectification requirements are determined and the necessary repair action initiated once verification and isolation of the defect are confirmed

4.

Verify defect rectification

4.1

Defect is rectified in accordance with approved maintenance data

4.2

All systems disturbed or accessed during troubleshooting are restored as applicable using maintenance manuals, repair schemes or approved maintenance data

4.3

All checks required by approved maintenance data to ensure correct operation of all disturbed systems are performed

Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment.

Skill must be demonstrated in the diagnosis of faults that are beyond the coverage of maintenance manual fault diagnosis guides in simulated applications in the training environment and/or in the workplace across a representative range of systems and components as specified in the Assessment Conditions.

The underlying skills inherent in this unit should be transferable across a range of inspection, testing and troubleshooting applications related to avionic systems, and where applicable other system interfaces/integration. It is essential that system testing procedures, cleanliness requirements and safety precautions applicable to the system being maintained are fully observed, understood and complied with. Ability to interpret inspection procedures and specifications (allowable limits) and apply them in practice is critical, as is the demonstrated ability to apply fundamental system theory in the logical diagnosis of complex faults.

Evidence of transferability of skills and knowledge related to performance and supervision of inspection, testing and troubleshooting is essential. This must be demonstrated through application across a number of aircraft avionic systems, including system interfaces/integration.

For systems and components relevant to the scope of the licence/ratings sought as per CASR Parts 42, 66 and 145 Manuals of Standards, look for evidence that confirms knowledge of:

theory related to system operation and interfaces between systems and with electrical/electronic control media to a level that will facilitate the diagnosis of faults beyond the level of maintenance manual fault diagnosis guides using reported symptoms and functional test results

component construction and theory of operation to a level that will facilitate the diagnosis of faults beyond the level of maintenance manual fault diagnosis guides using reported symptoms and functional test results

advanced fault diagnostic techniques

condition monitoring and trend analysis techniques.

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Systems and related components include:

Electrical systems

Electronic systems

Instrument systems

Radio communication and navigation systems

Autoflight systems

Troubleshooting

Troubleshooting, for the purpose of this unit, is defined as:

the troubleshooting from first principles, of defects beyond available maintenance data in the systems of fixed or rotary wing aircraft types. Troubleshooting must be demonstrated across a range of typical systems and system components that includes but is not limited to airframes, engine(s) and other systems (and parts thereof) operated by inherently electrical, electronic, instrument or radio principles or means. Coverage is not required of specific type systems that are included in type training and practical consolidation of training (PCT) activities leading to a specific type licence rating

Procedures and requirements include:

Industry standard procedures specified by manufacturers, regulatory authorities or the enterprise