NTISthis.com

Evidence Guide: MEA252B - Test, align and troubleshoot aircraft synchro and servo system components

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MEA252B - Test, align and troubleshoot aircraft synchro and servo system components

What evidence can you provide to prove your understanding of each of the following citeria?

Test synchro and servo system components

  1. Synchro and servo system components are correctly prepared and connected to the appropriate test equipment/rig in accordance with approved procedures
  2. Components are functionally tested or cycled through the prescribed test procedures in accordance with maintenance manual for evidence of serviceability or malfunction
  3. Faults or unserviceabilities are correctly identified and recorded on appropriate maintenance documentation
Synchro and servo system components are correctly prepared and connected to the appropriate test equipment/rig in accordance with approved procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Components are functionally tested or cycled through the prescribed test procedures in accordance with maintenance manual for evidence of serviceability or malfunction

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faults or unserviceabilities are correctly identified and recorded on appropriate maintenance documentation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Align synchro and servo system components

  1. Synchro and servo system components are adjusted in accordance with approved procedures and maintenance manuals until operating within prescribed limits/tolerances
Synchro and servo system components are adjusted in accordance with approved procedures and maintenance manuals until operating within prescribed limits/tolerances

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Troubleshoot synchro and servo system components

  1. Available information from maintenance records and inspection and test results is used, where necessary, to assist in fault determination
  2. Maintenance manual fault diagnosis guides and logic processes are used to ensure efficient and accurate troubleshooting
  3. Synchro and servo system component faults are located and the causes of the faults are clearly identified and correctly recorded in maintenance documentation, where required
  4. Fault rectification requirements are determined
Available information from maintenance records and inspection and test results is used, where necessary, to assist in fault determination

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintenance manual fault diagnosis guides and logic processes are used to ensure efficient and accurate troubleshooting

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Synchro and servo system component faults are located and the causes of the faults are clearly identified and correctly recorded in maintenance documentation, where required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fault rectification requirements are determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to test, align and troubleshoot synchro and servo system components circuitry in accordance with maintenance manuals and regulatory/industry procedures while observing all relevant safety precautions.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The underlying skills inherent in this unit should be transferable across a range of testing, aligning and troubleshooting applications (including the timely involvement of supervisors or other trades) associated with synchro and servo system components. Ability to interpret inspection and testing procedures and specifications (allowable limits) and apply them in practice is critical. It is essential that testing procedures, cleanliness requirements and safety precautions applicable to the system being maintained are fully observed, understood and complied with.

Evidence of transferability of skills and knowledge related to testing, aligning and troubleshooting is essential. This may be demonstrated through application across a range of the synchro and servo system components listed in the Range Statement. The application of testing procedures should also clearly indicate knowledge of system operation. System operation knowledge, the relationship of individual components and the links with other systems (if applicable) will be necessary to supplement evidence of ability to troubleshoot the component within the limits of the fault finding guide before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.

A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved under routine supervision on a representative range of components from each of Group 1 and 2 as listed in the Range Statement. This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide.

Context of and specific resources for assessment

Competency should be assessed in the work environment, using tools and equipment specified in maintenance documentation. It is also expected that general and special purpose tools and test equipment would be used where appropriate.

Method of assessment

Guidance information for assessment

Required Skills and Knowledge

Required skills

Look for evidence that confirms skills in:

applying relevant OHS practices

using approved repair procedures and processes relating to synchro and servo system components

recognising the serviceability state and repair requirements for:

synchro/servo system error detection devices

DC and AC synchronous components

gyroscopic instruments (mechanical, electro-mechanical, vacuum/pressure types)

flight control servo devices

performing component testing to isolate/confirm faults and assessing post repair/overhaul serviceability

correctly aligning synchro and servo system components to prescribed specifications

applying logic processes to isolate synchro and servo system component faults

Required knowledge

Look for evidence that confirms knowledge of:

component and system operation

explaining the basic function and operation of synchro and servo system components to enable testing for fault isolation/confirmation, to determine repair or overhaul requirements and serviceability status post-repair or overhaul

explaining basic principles/functions, relating to synchro and servo system components and associated with:

advanced analogue fundamentals

synchronous systems

gyroscopes

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Note

Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide

Component testing, alignment and troubleshooting

Component testing, alignment and troubleshooting is assessed in the following Groups:

1. Synchro system components

2. Servo system components

Synchro and servo system components

Synchro and servo system components may come from:

air data computers, auto pilot servos, remote position indicators and other similar applications

Application of this unit may relate to:

scheduled or unscheduled maintenance activities

individual or team-related activities

complex testing and adjusting of components, and when undertaken, this will be carried out under supervision

Procedures and requirements

Refer to industry standard procedures specified by manufacturers, regulatory authorities or the enterprise