The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to terminate or repair aircraft optical fibre cable
|
|
The system is isolated and it is confirmed that the optical source is not transmitting Completed |
Evidence:
|
The requirement to terminate or replace an existing termination is confirmed from maintenance data Completed |
Evidence:
|
The extent of damage is identified Completed |
Evidence:
|
Equipment required for compliance with work health and safety (WHS) requirements is assembled and required personal protective equipment (PPE) is obtained and worn during termination and/or repair activities Completed |
Evidence:
|
Required tools, optical connectors, materials and test equipment are assembled ready for use Completed |
Evidence:
|
Terminate aircraft optical fibre cable
|
|
Optical fibre cable is prepared for termination in accordance with the applicable maintenance data or manufacturer’s instructions Completed |
Evidence:
|
The specified optical connector is fitted in accordance with relevant maintenance data or manufacturer’s instructions Completed |
Evidence:
|
Repair aircraft optical fibre cable
|
|
The extent of damage to the optical fibre cable is determined and assessed for repair or for cable replacement Completed |
Evidence:
|
If damage is within specified limits the repair method is determined from the applicable maintenance data Completed |
Evidence:
|
The repair is performed in accordance with the applicable repair method while observing all applicable WHS requirements Completed |
Evidence:
|
Remove fibre hazards from work area
|
|
The work area is cleaned and all waste materials are packaged and disposed of in accordance with WHS requirements and enterprise procedures Completed |
Evidence:
|
Test terminated and/or repaired optical fibre cable
|
|
Terminated and/or repaired fibre optic cable is tested for loss and strength of light transmission in accordance with maintenance data or manufacturer’s specifications Completed |
Evidence:
|
Optical fibre cable is connected to light transmitter and optical receiver Completed |
Evidence:
|