The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to remove corrosion damage
|
|
Extent of damage is correctly assessed to assist in determining removal procedure Completed |
Evidence:
|
Structure is supported and prepared, in accordance with the applicable maintenance manual, to ensure personnel safety and freedom from damage Completed |
Evidence:
|
Appropriate corrosion removal procedure is identified in accordance with structural repair manual and/or approved data Completed |
Evidence:
|
Specialist advice is obtained in establishing an approved repair scheme where a standard corrosion removal procedure cannot be identified or damage criteria is out of limits Completed |
Evidence:
|
All materials and equipment required are organised Completed |
Evidence:
|
Remove corrosion damage
|
|
Corrosion removal is performed and protective coatings, sealants and jointing compounds applied, in accordance with approved repair scheme, ensuring that aircraft standard practices are used and process requirements are carried out Completed |
Evidence:
|
Structure/component is cleaned of all waste material or contaminants Completed |
Evidence:
|
Components are adjusted, where necessary, to operate within prescribed specifications Completed |
Evidence:
|
Required maintenance/repair documentation is completed and processed in accordance with standard enterprise procedures Completed |
Evidence:
|
Repaired components or assemblies are tagged, sealed and packaged or cradled in accordance with specified procedures, where required Completed |
Evidence:
|