NTISthis.com

Evidence Guide: MEA424 - Evaluate aircraft non-destructive tests

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MEA424 - Evaluate aircraft non-destructive tests

What evidence can you provide to prove your understanding of each of the following citeria?

Assess requirements for NDT

  1. The inspection area is assessed for testing and all possible failure sites identified using metallurgical analysis
  2. Information relevant to test development is collected from available sources using accepted techniques
  3. Information is analysed and interpreted
  4. Test requirements are determined
The inspection area is assessed for testing and all possible failure sites identified using metallurgical analysis

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Information relevant to test development is collected from available sources using accepted techniques

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Information is analysed and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test requirements are determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Evaluate NDT techniques and procedures

  1. Test methods, techniques and procedures for specific NDT tasks are specified
  2. Applicable codes, standards, specifications and procedures are interpreted
  3. Test procedures are developed in accordance with established techniques and metallurgical principles
Test methods, techniques and procedures for specific NDT tasks are specified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Applicable codes, standards, specifications and procedures are interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test procedures are developed in accordance with established techniques and metallurgical principles

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Validate/confirm NDT tasks

  1. General and specific test procedures are validated in accordance with established techniques
  2. Inspection results are interpreted in accordance with existing codes, standards and specifications
General and specific test procedures are validated in accordance with established techniques

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection results are interpreted in accordance with existing codes, standards and specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Evaluate NDT test procedures

  1. Procedures are evaluated for effectiveness
  2. Evaluation results are documented and reported in accordance with standard enterprise procedures
  3. Changes/amendments to NDT procedures are made and distributed in accordance with standard enterprise procedures
Procedures are evaluated for effectiveness

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Evaluation results are documented and reported in accordance with standard enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Changes/amendments to NDT procedures are made and distributed in accordance with standard enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1.

Assess requirements for NDT

1.1

The inspection area is assessed for testing and all possible failure sites identified using metallurgical analysis

1.2

Information relevant to test development is collected from available sources using accepted techniques

1.3

Information is analysed and interpreted

1.4

Test requirements are determined

2.

Evaluate NDT techniques and procedures

2.1

Test methods, techniques and procedures for specific NDT tasks are specified

2.2

Applicable codes, standards, specifications and procedures are interpreted

2.3

Test procedures are developed in accordance with established techniques and metallurgical principles

3.

Validate/confirm NDT tasks

3.1

General and specific test procedures are validated in accordance with established techniques

3.2

Inspection results are interpreted in accordance with existing codes, standards and specifications

4.

Evaluate NDT test procedures

4.1

Procedures are evaluated for effectiveness

4.2

Evaluation results are documented and reported in accordance with standard enterprise procedures

4.3

Changes/amendments to NDT procedures are made and distributed in accordance with standard enterprise procedures

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1.

Assess requirements for NDT

1.1

The inspection area is assessed for testing and all possible failure sites identified using metallurgical analysis

1.2

Information relevant to test development is collected from available sources using accepted techniques

1.3

Information is analysed and interpreted

1.4

Test requirements are determined

2.

Evaluate NDT techniques and procedures

2.1

Test methods, techniques and procedures for specific NDT tasks are specified

2.2

Applicable codes, standards, specifications and procedures are interpreted

2.3

Test procedures are developed in accordance with established techniques and metallurgical principles

3.

Validate/confirm NDT tasks

3.1

General and specific test procedures are validated in accordance with established techniques

3.2

Inspection results are interpreted in accordance with existing codes, standards and specifications

4.

Evaluate NDT test procedures

4.1

Procedures are evaluated for effectiveness

4.2

Evaluation results are documented and reported in accordance with standard enterprise procedures

4.3

Changes/amendments to NDT procedures are made and distributed in accordance with standard enterprise procedures

Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and must include:

conducting metallurgical assessment of inspection areas and identifying potential failure sites and modes

designating most appropriate method, technique or procedure

referencing aircraft maintenance information and regulatory requirements for inspection

developing and validating test procedures

applying safety procedures, standard operating procedures and legislative requirements to all work

reading/interpreting/applying relative testing standards

reading/interpreting/applying relative conformance standards

documenting procedure and results

submitting reports in accordance with standard enterprise procedures.

Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

definition of structural terms, i.e. safe life, damage tolerant, failsafe, stress, strain, shear and cycles

inspection requirements for metal and composite structure, including:

ageing aircraft inspection requirements

safe life structure

damage tolerant structure

fail safe structure

potential causes of structural failure

metallurgical analysis to assess inspection areas and potential failure sites and modes

NDT methods, techniques and procedures

meaning and validity of relevant codes, standards, specifications and procedures

regulatory requirements of the ADF and CASA relating to the use of NDT for inspection of aircraft structure and components

test procedures for testing techniques and specimens

validation processes

process for approval of procedures

process for documentation/distribution of procedures

evaluation procedures

process for documentation of evaluation results

process for amending tests and distributing amendments

national/Australian Standards, NOHSC guides, state/territory regulatory codes of practice/standards

use and application of personal protective equipment (PPE)

safe work practices and procedures

relevant hazards and control measures related to the competency.

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Test methods, techniques and procedures refer to:

Standard techniques and procedures associated with:

penetrant testing

magnetic particle testing

eddy current testing

ultrasonic testing

radiographic testing

Codes, standards and specifications include:

AAP7002 .053 Technical airworthiness Management Manual

Civil aviation Safety Regulations (CASR)

overseas airworthiness regulators, such as the Federal Aviation Authority (FAA), European Aviation Safety Authority (EASA) and Transport Canada

AS 3669-2006 Non-destructive testing – Qualification and approval of personnel – Aerospace

NAS410 Revision 2 Certification and qualification of non-destructive testing personnel (February 2003)

BS EN 4179:2009 Aerospace series. Qualification and approval of personnel for non-destructive testing

BS EN 473:2008 Non-destructive testing. Qualification and certification of NDT personnel. General principles

ISO 9712:2005 Non-destructive testing – Qualification and certification of personnel

Applicable materials and equipment specifications