The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to terminate or repair aircraft optical fibre cable
|
|
Isolate system and confirm optical source is not transmitting Completed |
Evidence:
|
Confirm requirement to terminate or replace an existing termination from maintenance data Completed |
Evidence:
|
Inspect cable to identify extent of damage Completed |
Evidence:
|
Assemble equipment required for compliance with work health and safety (WHS) requirements and required personal protective equipment (PPE), and ensure PPE is worn during termination and/or repair activities Completed |
Evidence:
|
Assemble required tools, optical connectors, materials and test equipment ready for use Completed |
Evidence:
|
Terminate aircraft optical fibre cable
|
|
Prepare optical fibre cable for termination in accordance with maintenance data or manufacturer’s instructions Completed |
Evidence:
|
Fit specified optical connector in accordance with maintenance data or manufacturer’s instructions Completed |
Evidence:
|
Repair aircraft optical fibre cable
|
|
Confirm extent of damage to optical fibre cable and assess for repair or for cable replacement Completed |
Evidence:
|
Determine repair method from maintenance data for damage within specified limits Completed |
Evidence:
|
Perform repair, including splicing, in accordance with repair method while observing all applicable WHS requirements Completed |
Evidence:
|
Remove fibre hazards from work area
|
|
Clean work area and pack and dispose of all waste materials in accordance with WHS requirements and standard enterprise procedures Completed |
Evidence:
|
Test terminated or repaired optical fibre cable
|
|
Test terminated or repaired fibre optic cable for loss and strength of light transmission in accordance with maintenance data or manufacturer’s specifications Completed |
Evidence:
|
Connect optical fibre cable to light transmitter and optical receiver in accordance with manufacturer’s specifications Completed |
Evidence:
|