The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Inspect piston engine system and components
|
|
Check isolation tags already attached to the system or related systems and configure aircraft or engine for safe system inspection and operation in accordance with applicable maintenance manual Completed |
Evidence:
|
Visually or physically check piston engine and components or systems for external and internal signs of defects in accordance with applicable maintenance manual while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDSs) and items of personal protective equipment (PPE) Completed |
Evidence:
|
Prepare aircraft and engine in accordance with applicable maintenance manual Completed |
Evidence:
|
Provide assistance with engine and/or system operation during prescribed test procedures to establish serviceability and correct function in accordance with applicable maintenance manual Completed |
Evidence:
|
Troubleshoot piston engine
|
|
Use available information from maintenance documentation and inspection and test results, when required, to assist in fault determination Completed |
Evidence:
|
Use maintenance manual fault diagnosis guide and logical processes to ensure efficient and accurate troubleshooting to line replacement level Completed |
Evidence:
|
Obtain specialist advice, when required, to assist with the troubleshooting process Completed |
Evidence:
|
Locate piston engine faults and identify and record the causes of the faults in maintenance documentation, when required Completed |
Evidence:
|
Determine fault rectification requirements to assist in planning the repair Completed |
Evidence:
|
Remove piston engine and engine system components
|
|
Prepare and support aircraft and render safe in accordance with the applicable maintenance manual including fitting isolation tags, when required, to ensure the safety of personnel and freedom from damage during engine removal Completed |
Evidence:
|
Carry out removal in accordance with the applicable maintenance manual while observing all relevant WHS requirements, including the use of MSDSs and items of PPE Completed |
Evidence:
|
Tag and prepare engine for transport or storage in accordance with the specified procedures Completed |
Evidence:
|
Complete required removal maintenance documentation and process in accordance with standard enterprise procedures Completed |
Evidence:
|
Install piston engine and engine system components
|
|
Check engine to be installed to confirm correct part or model numbers, modification status and serviceability Completed |
Evidence:
|
Carry out installation in accordance with the applicable maintenance manual Completed |
Evidence:
|
Remove support or safety equipment at the appropriate time to ensure personnel safety and freedom from structural damage Completed |
Evidence:
|
Complete required installation maintenance documentation and process in accordance with standard enterprise procedures Completed |
Evidence:
|
Inspect and maintain fixed pitch propeller
|
|
Render engine safe for propeller inspection in accordance with maintenance manual or enterprise procedures Completed |
Evidence:
|
Inspect fixed pitch propeller for security, damage and deterioration in accordance with the applicable maintenance manual while observing all relevant WHS requirements, including the use of MSDSs and items of PPE Completed |
Evidence:
|
Blend out metal propeller nicks and dents within damage limits in accordance with maintenance manual procedures Completed |
Evidence:
|
Remove fixed pitch propeller
|
|
Render engine safe and the aircraft is prepared for propeller removal in accordance with maintenance manual or enterprise procedures Completed |
Evidence:
|
Remove propeller in accordance with maintenance manual procedures while observing all relevant WHS requirements, including the use of MSDSs and items of PPE Completed |
Evidence:
|
Tag and prepare removed propeller for transport or storage in accordance with specified procedures Completed |
Evidence:
|
Complete required removal maintenance documentation and process in accordance with standard enterprise procedures Completed |
Evidence:
|
Install fixed pitch propeller
|
|
Render engine safe and prepare the aircraft for propeller installation in accordance with maintenance manual or enterprise procedures Completed |
Evidence:
|
Check propeller to be installed to confirm correct part or number, modification status and serviceability Completed |
Evidence:
|
Carry out installation in accordance with the applicable maintenance manual Completed |
Evidence:
|
Complete required installation maintenance documentation and process in accordance with standard enterprise procedures Completed |
Evidence:
|