The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Inspect aircraft structure
|
|
Use relevant maintenance documentation to identify specific inspection requirements Completed |
Evidence:
|
Undertake appropriate preparation and access to the aircraft structure to allow for proper inspection in accordance with maintenance documentation Completed |
Evidence:
|
Visually or physically check aircraft structure for signs of deformation defects or damage in accordance with maintenance documentation and approved procedures while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDSs) and items of personal protective equipment (PPE) Completed |
Evidence:
|
Assess damage or defects against damage or wear limits specified by structural repair manual or other approved data to determine if repair or replacement is required Completed |
Evidence:
|
Complete maintenance documentation and process in accordance with standard enterprise procedures Completed |
Evidence:
|
Maintain aircraft structure
|
|
Employ preventative maintenance techniques to preserve the integrity of aircraft structure Completed |
Evidence:
|
Obtain required specialist or supervisory advice to assist with the troubleshooting process Completed |
Evidence:
|
Clean work area of all waste material or contaminants Completed |
Evidence:
|
Complete required maintenance documentation and process in accordance with standard enterprise procedures Completed |
Evidence:
|
Support and prepare structure in accordance with the applicable maintenance manual to ensure personnel safety and freedom from damage to aircraft or component during component removal Completed |
Evidence:
|
Carry out component removal in accordance with the applicable maintenance manual while observing all relevant WHS requirements, including the use of MSDS and items of PPE Completed |
Evidence:
|
Complete required maintenance documentation and process in accordance with standard enterprise procedures Completed |
Evidence:
|
Tag and prepare removed components for transport, where applicable and in accordance with specified procedures Completed |
Evidence:
|
Check structural and/or non-structural components to be installed to confirm correct part numbers, serviceability and modification status Completed |
Evidence:
|
Carry out component installation in accordance with the applicable maintenance manual while observing all relevant WHS requirements, including the use of MSDS and items of PPE Completed |
Evidence:
|
Remove support or safety equipment at an appropriate time to ensure personnel safety and freedom from structural damage Completed |
Evidence:
|
Complete required maintenance documentation and process in accordance with standard enterprise procedures Completed |
Evidence:
|