The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine requirements
|
|
Interpret and match component defect reports (removal tags) or customer order by part and serial numbers Completed |
Evidence:
|
Inspect and/or operate ancillary section components through prescribed test procedures to establish serviceability and confirm defects, when required Completed |
Evidence:
|
Clearly establish modification status to assist in determining the overhaul requirements for the components Completed |
Evidence:
|
Identify and document extent of overhaul or repair in accordance with standard enterprise procedures Completed |
Evidence:
|
Troubleshoot ancillary section components
|
|
Use available information from maintenance records and test results, where required, to assist in fault determination Completed |
Evidence:
|
Use logical processes to ensure efficient and accurate troubleshooting Completed |
Evidence:
|
Obtain specialist advice, when required, to assist with, or confirm, the fault and rectification requirement Completed |
Evidence:
|
Locate ancillary section component or module faults and clearly identify the causes of the faults Completed |
Evidence:
|
Determine fault rectification requirements to assist in planning the repair Completed |
Evidence:
|
Dismantle and inspect ancillary section component parts
|
|
Dismantle ancillary section component parts in accordance with maintenance manual while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDSs) and items of personal protective equipment (PPE) Completed |
Evidence:
|
Assess component parts for serviceability in accordance with the relevant maintenance documentation Completed |
Evidence:
|
Tag parts requiring specialist repair and specify repair instructions in accordance with standard enterprise procedures Completed |
Evidence:
|
Prepare parts requiring non-destructive testing (NDT) for testing in accordance with the relevant maintenance documentation Completed |
Evidence:
|
Compile and process parts lists in accordance with standard enterprise procedures Completed |
Evidence:
|
Repair and/or modify ancillary section components or parts
|
|
Repair and replace component parts in accordance with the relevant maintenance documentation Completed |
Evidence:
|
Modify components, when required, in accordance with relevant manufacturers’ bulletins or procedures and/or customer requirements Completed |
Evidence:
|
Assemble and adjust ancillary section components
|
|
Assemble ancillary section component parts within specified tolerances and in accordance with the appropriate maintenance documents while observing all relevant WHS requirements, including the use of MSDSs and items of PPE Completed |
Evidence:
|
Remove support or safety equipment, where fitted, at the appropriate time Completed |
Evidence:
|
Adjust components to ensure that fits and clearances are within prescribed specifications, and seek required supervisory guidance for complex testing and adjustments Completed |
Evidence:
|
Tag, seal and pack finished components in accordance with standard enterprise procedures Completed |
Evidence:
|
Complete required maintenance documentation and modification records and process in accordance with standard enterprise procedures Completed |
Evidence:
|