NTISthis.com

Evidence Guide: MEAMEC0067 - Test gas turbine engines and engine modules after overhaul or repair

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MEAMEC0067 - Test gas turbine engines and engine modules after overhaul or repair

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare engine or module for testing

  1. Check maintenance documentation to confirm that engine or module is ready for testing
  2. Assemble engine modules into a test engine, where required
  3. Configure engine for testing in accordance with maintenance manual requirements and standard enterprise procedures
Check maintenance documentation to confirm that engine or module is ready for testing

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assemble engine modules into a test engine, where required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Configure engine for testing in accordance with maintenance manual requirements and standard enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Install engine in test stand

  1. Install engine in test stand in accordance with maintenance manual requirements and standard enterprise procedures while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDSs) and items of personal protective equipment (PPE)
  2. Check fuel, oil and fluid levels
  3. Prepare engine test stand for operation
Install engine in test stand in accordance with maintenance manual requirements and standard enterprise procedures while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDSs) and items of personal protective equipment (PPE)

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check fuel, oil and fluid levels

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare engine test stand for operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Run and test engine or module performance

  1. Start engine and check operating parameters
  2. Test and trim engine performance, where applicable, in accordance with maintenance manual requirements and standard enterprise procedures, and seek required supervisory guidance for complex testing and adjustments
  3. Record engine operating parameters and test results in accordance with standard enterprise procedures
Start engine and check operating parameters

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test and trim engine performance, where applicable, in accordance with maintenance manual requirements and standard enterprise procedures, and seek required supervisory guidance for complex testing and adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Record engine operating parameters and test results in accordance with standard enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove engine from test stand

  1. Remove engine from test stand in accordance with maintenance manual requirements and standard enterprise procedures while observing all relevant WHS requirements, including the use of MSDSs and items of PPE
  2. Configure, inhibit and prepare serviceable engines or modules in accordance with maintenance manual requirements and standard enterprise procedures for transport or storage, and seek required supervisory guidance for complex testing and adjustments
  3. Return unserviceable engines or modules to workshop in accordance with standard enterprise procedures for rectification or rework
Remove engine from test stand in accordance with maintenance manual requirements and standard enterprise procedures while observing all relevant WHS requirements, including the use of MSDSs and items of PPE

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Configure, inhibit and prepare serviceable engines or modules in accordance with maintenance manual requirements and standard enterprise procedures for transport or storage, and seek required supervisory guidance for complex testing and adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Return unserviceable engines or modules to workshop in accordance with standard enterprise procedures for rectification or rework

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge