NTISthis.com

Evidence Guide: MEM18016B - Analyse plant and equipment condition monitoring results

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MEM18016B - Analyse plant and equipment condition monitoring results

What evidence can you provide to prove your understanding of each of the following citeria?

Analyse condition monitoring results

  1. Records/graphs/results of condition monitoring are examined and analysed and problem areas are identified.
  2. Necessary calculations/computations are undertaken.
  3. Appropriate reports/determinations of analyses are undertaken to prescribed site procedure.
Records/graphs/results of condition monitoring are examined and analysed and problem areas are identified.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Necessary calculations/computations are undertaken.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Appropriate reports/determinations of analyses are undertaken to prescribed site procedure.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Develop recommendations

  1. Recommendations are developed based on previous history, results, specifications and legislative requirements.
  2. Recommendations are reported to appropriate authority.
Recommendations are developed based on previous history, results, specifications and legislative requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Recommendations are reported to appropriate authority.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to analyse plant and equipment condition monitoring results. Competency in this unit cannot be claimed until all prerequisites have been satisfied.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with analysing plant and equipment condition monitoring results or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.

Guidance information for assessment

Required Skills and Knowledge

Required skills

Look for evidence that confirms skills in:

obtaining results of condition monitoring of plant/equipment

performing calculations to analyse condition monitoring data

preparing reports based on the analysis of the condition monitoring data

reporting recommendations to the appropriate authority

orally reporting routine information

Required knowledge

Look for evidence that confirms knowledge of:

the operational specifications of the plant/equipment being monitored

any trends and/or deviations from operational specifications

numerical operations and calculations/formulae for data analysis within the scope of this unit

the reasons for undertaking the identified calculations

the procedures for reporting the analysis of condition monitoring data

the previous history of the plant/equipment being monitored

any relevant legislative requirements

the operational specifications of the plant/equipment

the recommendations with respect to action to be taken

the reasons for the recommendations made

the expected effect of the recommendations on the operational performance of the plant/equipment

the procedures for reporting recommendations

the authority/person to whom the recommendations are to be made

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.