The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Secure system from potentially hazardous situations
|
|
Sources of stored energy are identified. Completed |
Evidence:
|
Mobile plant is assessed for potentially hazardous situations and conditions. Completed |
Evidence:
|
Accumulators and position actuators are bled down to remove stored energy as per manufacturers' instructions. Completed |
Evidence:
|
Check hydraulic system components
|
|
System components are identified correctly, using appropriate circuit diagrams or manufacturers' instruction. Completed |
Evidence:
|
Faults are traced and localised with reference to manufacturer troubleshooting procedures and flow charts. Completed |
Evidence:
|
The operational function of components is inspected and tested in accordance with standard operating procedures. Completed |
Evidence:
|
Replace faulty system components
|
|
Faulty components are correctly removed from system using appropriate tools, techniques and procedures. Completed |
Evidence:
|
Replacement components are sourced where appropriate from manufacturer/supplier. Completed |
Evidence:
|
Hoses, tubes and pipework are prepared and assembled using appropriate tools, techniques and procedures. Completed |
Evidence:
|
Replacement components and conductors are correctly assembled and refitted to system. Completed |
Evidence:
|
System is tested and adjusted for correct operation according to standard operating procedures. Completed |
Evidence:
|
Dismantle, inspect and rectify linear actuators
|
|
Hydraulic cylinders and rams are dismantled using appropriate tools, techniques and procedures. Completed |
Evidence:
|
Component parts are evaluated for condition. Completed |
Evidence:
|
Seals and bearings are fitted as per manufacturer specifications. Completed |
Evidence:
|
Cylinders/rams are reassembled and fitted as per manufacturer instructions. Completed |
Evidence:
|
Assembly is tested by use of machine circuit or equivalent. Completed |
Evidence:
|
Service hydraulic systems
|
|
Hydraulic systems are serviced according to manufacturers' schedules and instructions. Completed |
Evidence:
|