NTISthis.com

Evidence Guide: MEM19011B - Perform wax injection of moulds for lost wax casting process

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MEM19011B - Perform wax injection of moulds for lost wax casting process

What evidence can you provide to prove your understanding of each of the following citeria?

Perform wax injection of moulds

  1. Appropriate wax material is selected for given task.
  2. Injection equipment/tools are prepared.
  3. Moulds are prepared correctly.
  4. Wax injection procedures are carried out correctly.
Appropriate wax material is selected for given task.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Injection equipment/tools are prepared.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Moulds are prepared correctly.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wax injection procedures are carried out correctly.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove and inspect patterns

  1. Wax pattern is removed without damage.
  2. Wax pattern is inspected and stored as required.
  3. Work area is secured and cleaned.
Wax pattern is removed without damage.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wax pattern is inspected and stored as required.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is secured and cleaned.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to perform wax injection of moulds for 'lost wax' casting process.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with performing wax injection of moulds for 'lost wax' casting process or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.

Guidance information for assessment

Required Skills and Knowledge

Required skills

Look for evidence that confirms skills in:

following work procedures

selecting wax type according to wax/model/cavity specifications

preparing moulds

rectifying inappropriate mould features

completing injection

removing duplicated wax pattern

checking duplicate for compliance with master/specifications and irregularities

reporting/recording irregularities

reading and interpreting routine information on written job instructions, specifications and standard operating procedures. May include drawings

using measurement skills needed to meet the requirements of this unit

entering routine and familiar information onto proformas and standard workplace forms

planning, sequencing operations

Required knowledge

Look for evidence that confirms knowledge of:

wax types and characteristics

procedures for wax injection equipment/processes for the given values of time, temperature, pressure

mould conditions

injection procedures

minor variations and adjustments to processes/ equipment situations

undamaged wax duplicate removal techniques for a range of situations

procedures for wax duplicate inspection

common irregularities

causes of imperfections

remedies for imperfections

safe storage procedures

procedures for safe cleaning, disposal, and storage

hazards and control measures associated with working with hot wax, including housekeeping

use and application of personal protective equipment

safe work practices and procedures

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Wax material

Type of wax according to design specification requirements

Inspected

For missing elements, alignment of rubber mould, air bubbles, shrinkage or distortion