NTISthis.com

Evidence Guide: MEM20010A - Gain entry and reinstate automotive locking systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MEM20010A - Gain entry and reinstate automotive locking systems

What evidence can you provide to prove your understanding of each of the following citeria?

Establish entry requirements to auto locking system

  1. The reason for entry is established.
  2. Authenticity of request is verified in accordance with organisational and industry procedures.
  3. Nature of problem and circumstances of prior operation are established in accordance with organisational procedures, inspection/diagnostic techniques and original specifications.
  4. Vehicle, locking system and other relevant information is identified from appropriate sources and in accordance with organisational and customer requirements.
  5. Specifications for components are obtained from appropriate source and are interpreted correctly.
The reason for entry is established.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Authenticity of request is verified in accordance with organisational and industry procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Nature of problem and circumstances of prior operation are established in accordance with organisational procedures, inspection/diagnostic techniques and original specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle, locking system and other relevant information is identified from appropriate sources and in accordance with organisational and customer requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Specifications for components are obtained from appropriate source and are interpreted correctly.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Gain entry to vehicle

  1. Appropriate entry method is selected in accordance with specific circumstances, customer requirements and organisational procedures.
  2. Tools, equipment, materials and consumables are selected appropriate to entry requirements and checked for serviceability in accordance with manufacturers' specifications and organisational procedures.
  3. Selected tools are used correctly to gain entry using appropriate industry practices.
  4. Entry is gained in accordance with applicable legislation, codes, regulations and standards.
Appropriate entry method is selected in accordance with specific circumstances, customer requirements and organisational procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment, materials and consumables are selected appropriate to entry requirements and checked for serviceability in accordance with manufacturers' specifications and organisational procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Selected tools are used correctly to gain entry using appropriate industry practices.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Entry is gained in accordance with applicable legislation, codes, regulations and standards.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Re-instate automotive locking components and system

  1. Where applicable, replacement and/or repaired parts are selected for reassembly.
  2. Lock assemblies and components are dismantled/removed using appropriate organisational procedures, industry practices, tools and equipment.
  3. Sub-assemblies are inspected, tested and adjusted as necessary for compliance to original factory assembly and functioning.
  4. Appropriate techniques are applied in the preparation, assembly and adjustment of components parts using fastening equipment and methods which ensure conformance to specifications, operational performance, quality and safety of the completed assembly.
  5. Correct lubrication, packing, sealing materials are selected and applied correctly in conformance to job specifications.
  6. Locking system is inspected, tested and adjusted as necessary for compliance to original factory assembly and functioning.
Where applicable, replacement and/or repaired parts are selected for reassembly.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Lock assemblies and components are dismantled/removed using appropriate organisational procedures, industry practices, tools and equipment.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sub-assemblies are inspected, tested and adjusted as necessary for compliance to original factory assembly and functioning.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate techniques are applied in the preparation, assembly and adjustment of components parts using fastening equipment and methods which ensure conformance to specifications, operational performance, quality and safety of the completed assembly.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Correct lubrication, packing, sealing materials are selected and applied correctly in conformance to job specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Locking system is inspected, tested and adjusted as necessary for compliance to original factory assembly and functioning.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Finalise entry and reinstatement process

  1. Documentation is completed and processed in accordance with legislative and organisational requirements.
  2. Work area, tools and equipment are cleaned and stored in accordance with OHS and organisational requirements.
  3. Vehicle is cleaned and returned to serviceable condition.
  4. Customer is advised of work undertaken, further recommended actions and any other relevant information.
  5. Customer is instructed, as necessary, in accordance with organisational procedure and manufacturer recommendations.
Documentation is completed and processed in accordance with legislative and organisational requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area, tools and equipment are cleaned and stored in accordance with OHS and organisational requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is cleaned and returned to serviceable condition.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Customer is advised of work undertaken, further recommended actions and any other relevant information.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Customer is instructed, as necessary, in accordance with organisational procedure and manufacturer recommendations.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to gain entry to and reinstating automotive locking systems. Competency in this unit cannot be claimed until all prerequisites have been satisfied.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with gaining entry to and reinstating automotive locking systems, or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.

Guidance information for assessment

Required Skills and Knowledge

Required skills

Look for evidence that confirms skills in:

interpreting specifications, charts, manuals, diagrams and related information specific to gaining entry

confirming and clarifying information

identifying automotive locking components and associated equipment

checking functioning of locking systems

tracing faults

selecting and using appropriate tools and equipment, materials and consumables

applying safe work practices

identifying and acting on actual and potential hazards

disassembling and assembling components

documenting information

housekeeping

Required knowledge

Look for evidence that confirms knowledge of:

types of vehicle locking systems - mechanical and electronic

attachment methods for window winders, internal handles, snibs, trims, cylinders, locks and external handles

release positions of ignition lock

release positions of air bag, front and side and appropriate safety procedures

break-off bolts, removal and replacement

window winders and door trims

door lock retainers

central locking

linkages and springs

use and application of personal protective equipment

safe work practices and procedures

hazards and control measures associated with gaining entry to automotive locking systems

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Appropriate sources

Catalogues, manufacturer manuals, drawings, detailed/technical sketches and associated data sheets

Organisational requirements

Quality assurance standards and procedures, service standards, safety and OHS practices and obligations, resource storage and use, organisational processes and procedures, documentation processes, product and process training

Customer requirements

Function and capabilities, access issues, service and maintenance requirements, product operation and warranty information, costings

Entry method

Pick, impressioning, reading, manipulate linkages, alternative methods

Tools and equipment

Hand and power tools specific to gaining entry, power tools and accessories, diagnostic specialist equipment, fixing tools, special-purpose equipment, vacuum cleaner

Materials and consumables

Lubricants, adhesives and sealants, cleaning materials, wire and cable

Legislation, codes, regulations and standards

Industry licensing, industry codes of practice, privacy laws, Australian standards, building codes and those of other regulatory bodies, quality assurance, organisational standards and practices, awards and enterprise agreements, competition, trade and consumer protection laws

Documentation

Historical records, procedures and measurements for opening specific vehicles, job sheets, invoices, warranties