The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Establish servicing requirements and liaise with customer
|
|
Inspect watch condition and type and discuss performance concerns with customer Completed |
Evidence:
|
Verify and agree on servicing requirements with customer Completed |
Evidence:
|
Carry out pre-repair tests to verify water-resistance Completed |
Evidence:
|
Prepare watch for handover Completed |
Evidence:
|
Record and document repair process Completed |
Evidence:
|
Open and close watch cases
|
|
Select and use workshop tools and equipment appropriately Completed |
Evidence:
|
Identify watch and band construction and components Completed |
Evidence:
|
Open and close watch cases correctly Completed |
Evidence:
|
Inspect parts and report and record results Completed |
Evidence:
|
Verify gasket condition and replace, as required Completed |
Evidence:
|
Clean cases and bands, as required, during and after repair Completed |
Evidence:
|
Select and replace power sources
|
|
Remove power sources using appropriate tools and equipment Completed |
Evidence:
|
Inspect watch for battery leakage damage and clean or refer for further service, as appropriate Completed |
Evidence:
|
Assess physical condition of existing cell and its operation under load Completed |
Evidence:
|
Select, replace and secure appropriate replacement power sources Completed |
Evidence:
|
Perform integrated circuit resetting or all clear operations as required Completed |
Evidence:
|
Handle, store and dispose of power sources correctly and in accordance with environmental guidelines Completed |
Evidence:
|
Perform electrical testing
|
|
Set up and use multimeters correctly Completed |
Evidence:
|
Test cell terminal voltage under load using correct methods and equipment Completed |
Evidence:
|
Test watch circuitry for current consumption using correct methods and equipment Completed |
Evidence:
|
Confirm results against manufacturer specifications Completed |
Evidence:
|
Select and replace bands
|
|
Identify band attachment and removal method Completed |
Evidence:
|
Remove and replace bands and components, as necessary, using appropriate methods, tools and equipment Completed |
Evidence:
|
Determine dimensions and type of replacement bands/ components required Completed |
Evidence:
|
Conduct water-resistance testing
|
|
Identify watches requiring water-resistance and/or pressure testing Completed |
Evidence:
|
Select appropriate water-resistance testing methods and equipment according to watch type Completed |
Evidence:
|
Set up and use equipment to verify results Completed |
Evidence:
|