The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine servicing requirements and liaise with customer
|
|
Follow standard operating procedures (SOPs) Completed |
Evidence:
|
Comply with work health and safety (WHS) requirements at all times |
|
Completed |
Evidence:
|
Identify type of chronograph watch mechanisms and components |
|
Completed |
Evidence:
|
Prepare written quotation and inform customer of watch condition and performance concerns, outlining recommended service procedures to be undertaken to remedy identified faults |
|
Completed |
Evidence:
|
Verify and agree on servicing requirements with customer |
|
Completed |
Evidence:
|
Prepare watch for handover |
|
Completed |
Evidence:
|
Record and document repair process |
|
Completed |
Evidence:
|
Disassemble and reassemble chronograph watches
|
|
Establish an appropriate clean and safe work environment Completed |
Evidence:
|
Select and use appropriate personal protective equipment (PPE) in accordance with SOPs |
|
Completed |
Evidence:
|
Open and close chronographs watch cases |
|
Completed |
Evidence:
|
Use hand tools and equipment in safe and correct manner |
|
Completed |
Evidence:
|
Remove and replace case components, dials and hands, movements and sub-assemblies in correct sequence without damaging or marking |
|
Completed |
Evidence:
|
Verify condition of case pushbuttons, operation and gaskets and replace, as required |
|
Completed |
Evidence:
|
Clean cases and bands, as required |
|
Completed |
Evidence:
|
Apply dismantling and assembly precautions |
|
Completed |
Evidence:
|
Service and adjust chronograph mechanisms
|
|
Inspect condition of chronograph components Completed |
Evidence:
|
Lubricate chronograph mechanism with correct type and amount according to manufacturer specifications |
|
Completed |
Evidence:
|
Replace faulty or worn components |
|
Completed |
Evidence:
|
Clean chronograph components |
|
Completed |
Evidence:
|
Inspect chronograph watch for cleanliness and rectify imperfections and faults |
|
Completed |
Evidence:
|
Adjust chronograph components for correct end shake, clearances and penetrations |
|
Completed |
Evidence:
|
Test and adjust chronograph watch function and performance
|
|
Perform pre-service inspection and fault-finding of chronograph action, function and depthings Completed |
Evidence:
|
Verify and confirm dial and hand fitting, and casing up of chronograph |
|
Completed |
Evidence:
|
Verify watch performance and rate testing |
|
Completed |
Evidence:
|
Perform final adjustment and correction of recording and zeroing mechanism |
|
Completed |
Evidence:
|