NTISthis.com

Evidence Guide: MEM23051A - Apply basic electro and control scientific principles and techniques in mechanical and manufacturing engineering situations

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MEM23051A - Apply basic electro and control scientific principles and techniques in mechanical and manufacturing engineering situations

What evidence can you provide to prove your understanding of each of the following citeria?

Research and identify the range of basic electro and control scientific principles and techniques relevant to mechanical and manufacturing engineering

  1. The basic electro and control scientific principles relating to mechanical and manufacturing engineering , researched and reported on from appropriate sources of information and examination of applications.
  2. The basic electro and control techniques and associated technologies, software and hardware required to implement scientific principles relating to mechanical and manufacturing engineering situations and reported.
The basic electro and control scientific principles relating to mechanical and manufacturing engineering , researched and reported on from appropriate sources of information and examination of applications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

The basic electro and control techniques and associated technologies, software and hardware required to implement scientific principles relating to mechanical and manufacturing engineering situations and reported.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select basic electro and control scientific principles and techniques relevant to particular mechanical and manufacturing engineering applications

  1. For particular mechanical and manufacturing engineering situations, the relevant basic electro and control scientific principles can be selected.
  2. For particular mechanical and manufacturing engineering situations, the relevant basic electro and control techniques and associated technologies, software and hardware can be selected.
For particular mechanical and manufacturing engineering situations, the relevant basic electro and control scientific principles can be selected.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

For particular mechanical and manufacturing engineering situations, the relevant basic electro and control techniques and associated technologies, software and hardware can be selected.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply the relevant basic electro and control scientific principles and techniques appropriately

  1. The basic electro and control scientific principles are applied in a consistent and appropriate manner to obtain any required solution.
  2. Appropriate calculations and coherent units are used in the solution of engineering calculations.
  3. Significant figures are used in engineering calculations.
  4. The basic electro and control techniques and associated technologies, software and hardware are applied in a consistent and appropriate manner to obtain required solutions.
The basic electro and control scientific principles are applied in a consistent and appropriate manner to obtain any required solution.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate calculations and coherent units are used in the solution of engineering calculations.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Significant figures are used in engineering calculations.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

The basic electro and control techniques and associated technologies, software and hardware are applied in a consistent and appropriate manner to obtain required solutions.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Quote the results of the application of the basic electro and control scientific principles and techniques correctly

  1. For applications involving engineering calculations the solution is quoted in an appropriate style.
  2. For applications not involving engineering calculations the solution is quoted in an appropriate style.
For applications involving engineering calculations the solution is quoted in an appropriate style.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

For applications not involving engineering calculations the solution is quoted in an appropriate style.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to apply basic electro and control scientific principles and techniques in mechanical and manufacturing engineering situations.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with applying basic electro and control scientific principles and techniques in mechanical and manufacturing engineering situations or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.

Guidance information for assessment

Required Skills and Knowledge

Required skills

Look for evidence that confirms skills in:

selecting appropriate basic electro and control scientific principles to suit specified applications.

appropriate basic electro and control techniques and associated technologies, software and hardware have been chosen to suit specified applications.

applying basic electro and control scientific principles to particular mechanical or manufacturing engineering situations

applying and manipulating appropriate formulas for applications involving engineering calculations

applying appropriate calculations to engineering situations.

checking the validity of equations using dimensional analysis

applying basic electro and control techniques and associated technologies, software and hardware in a manner appropriate to the application and identified scientific principles

referring solutions to the original aim of the application.

quoting solutions in appropriate units, using appropriate significant figures.

quoting limitations of solutions, due to assumptions, scientific principles and techniques used

Required knowledge

Look for evidence that confirms knowledge of:

electro and control scientific principles

limitations of selected basic scientific principles

basic electro and control techniques and related technologies, software and hardware associated with implementing scientific principles in mechanical and manufacturing engineering solutions

the limitations of basic techniques and associated technologies, software and hardware

the applicability and limitations of basic electro and control scientific principles

the applicability and limitations of basic electro and control and associated technologies, software and hardware

appropriateness of calculations

fundamental and derived quantities

common systems of units

the procedure for converting between systems of units

common prefixes used with units and their values

the procedure for carrying out dimensional analysis

the concept of significant figures

the uncertainty of computations based on experimental data

the procedures for determining the significance of figures in calculations

the procedures for estimating errors in derived quantities

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Sources of information

Reference texts, manufacturer's catalogues and industrial magazines, websites, use of phone, email and fax information gathering.

Mechanical engineering

The engineering discipline concerned with the conceptual development, research, design, manufacture, implementation, installation, commissioning and maintenance of mechanical products, processes, systems or services for converting energy into power and motion, materials into product and components into machines and systems for domestic, industrial, public or private services, entertainment and military applications.

Manufacturing engineering

Manufacturing engineering will include conceptual development, design, manufacture, construction, implementation, installation, optimisation, commissioning and maintenance of resources and processes employed for the manufacture of product and components, machines and systems for domestic, commercial, industrial, entertainment, civil, medical or military applications

Basic scientific techniques and principles

Requires the application of underpinning knowledge of measurement, quantities and errors, significant figures in calculations and the use of coherent units in the completion of tasks

Basic techniques include basic hand and power tool operations, machining, fitting, welding, moulding, fabricating, wiring and programming techniques.