The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine product requirements
|
|
Follow standard operating procedures (SOPs) Completed |
Evidence:
|
Comply with work health and safety (WHS) requirements at all times |
|
Completed |
Evidence:
|
Select and use appropriate personal protective equipment (PPE) in accordance with SOPs |
|
Completed |
Evidence:
|
Identify product requirements from specifications, job sheets or work instructions and customer requests |
|
Completed |
Evidence:
|
Select open moulding technique most appropriate to product requirements |
|
Completed |
Evidence:
|
Identify or develop required procedures to make product using selected process |
|
Completed |
Evidence:
|
Set up equipment/ workplace and prepare materials
|
|
Select required items of equipment and ancillary equipment Completed |
Evidence:
|
Prepare and assemble all equipment and ancillary equipment as required by procedures |
|
Completed |
Evidence:
|
Identify required reinforcing/reinforcing system and determine quantity of reinforcing |
|
Completed |
Evidence:
|
Prepare reinforcing including cutting to size/shape and carry out any pre-treatment, as required |
|
Completed |
Evidence:
|
Identify required resin system |
|
Completed |
Evidence:
|
Determine quantity of resin components and confirm adequate quantities are available |
|
Completed |
Evidence:
|
Mix resin with minimised waste and test resin |
|
Completed |
Evidence:
|
Fabricate and adjust equipment and materials, as required
|
|
Identify and control hazards Completed |
Evidence:
|
Apply gel coat, resin and reinforcing in accordance with procedures |
|
Completed |
Evidence:
|
Ensure required resin distribution |
|
Completed |
Evidence:
|
Cure product and remove product from mould when ready |
|
Completed |
Evidence:
|
Identify typical problems and take appropriate remedial action |
|
Completed |
Evidence:
|
Perform final verification to meet product requirements |
|
Completed |
Evidence:
|
Clean up and maintain equipment
|
|
Clean all moulding and mixing equipment Completed |
Evidence:
|
Undertake minor maintenance, as appropriate |
|
Completed |
Evidence:
|
Prepare for next use or storage |
|
Completed |
Evidence:
|
Inspect equipment for faults and take appropriate corrective action |
|
Completed |
Evidence:
|
Minimise and dispose of waste as appropriate |
|
Completed |
Evidence:
|
Complete required logs and reports according to SOPs |
|
Completed |
Evidence:
|