The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Fabricate product
|
|
Identify and control hazards Completed |
Evidence:
|
Prepare nominated reinforcing, including cutting to size/shape and any pre-treatment, as required Completed |
Evidence:
|
Lay reinforcing in correct direction, including fibre orientation and fibre pre-forming, as appropriate Completed |
Evidence:
|
Make any appropriate adjustments to the resin system recipe Completed |
Evidence:
|
Mix selected resin system, as required Completed |
Evidence:
|
Fabricate product using selected process and minimise waste Completed |
Evidence:
|
Review product compared to requirements Completed |
Evidence:
|
Review reinforcing selection and fabrication process Completed |
Evidence:
|
Identify areas for improvement and take appropriate actions Completed |
Evidence:
|
Complete any required documentation/reporting according to SOPs Completed |
Evidence:
|
Determine product requirements
|
|
Follow standard operating procedures (SOPs) Completed |
Evidence:
|
Comply with work health and safety (WHS) requirements at all times |
|
Completed |
Evidence:
|
Select and use appropriate personal protective equipment (PPE) in accordance with SOPs |
|
Completed |
Evidence:
|
Determine requirements of resin system from specifications, job sheets or work instructions and customer requests |
|
Completed |
Evidence:
|
Select appropriate process to be used to fabricate product |
|
Completed |
Evidence:
|
Select most appropriate resin/resin system for job
|
|
Determine performance outcomes required from resin Completed |
Evidence:
|
Interpret specifications of available resins |
|
Completed |
Evidence:
|
Compare required properties with specifications of available resin systems |
|
Completed |
Evidence:
|
Interpret safety data sheets (SDS) for possible resin systems |
|
Completed |
Evidence:
|
Select most appropriate resin |
|
Completed |
Evidence:
|
Evaluate selected resin system
|
|
Identify current conditions impacting on resin chemistry Completed |
Evidence:
|
Identify adjustments which can be made to meet current conditions |
|
Completed |
Evidence:
|
Make allowable adjustments and monitor result |
|
Completed |
Evidence:
|
Fabricate a sample using the selected resin system and nominated reinforcing |
|
Completed |
Evidence:
|
Conduct/organise for relevant tests |
|
Completed |
Evidence:
|
Evaluate test results against product requirements |
|
Completed |
Evidence:
|
Review fabrication process and make any required changes to resin system or process
|
|
Identify and control hazards Completed |
Evidence:
|
Prepare nominated reinforcing, including cutting to size/shape and any pre-treatment, as required |
|
Completed |
Evidence:
|
Lay reinforcing in correct direction, including fibre orientation and fibre pre-forming, as appropriate |
|
Completed |
Evidence:
|
Make any appropriate adjustments to the resin system recipe |
|
Completed |
Evidence:
|
Mix selected resin system, as required |
|
Completed |
Evidence:
|
Fabricate product using selected process and minimise waste |
|
Completed |
Evidence:
|
Review product compared to requirements |
|
Completed |
Evidence:
|
Review reinforcing selection and fabrication process |
|
Completed |
Evidence:
|
Identify areas for improvement and take appropriate actions |
|
Completed |
Evidence:
|
Complete any required documentation/reporting according to SOPs |
|
Completed |
Evidence:
|