The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine job requirements
|
|
Follow standard operating procedures (SOPs) Completed |
Evidence:
|
Comply with work health and safety (WHS) requirements at all times |
|
Completed |
Evidence:
|
Use appropriate personal protective equipment (PPE) in accordance with SOPs |
|
Completed |
Evidence:
|
Identify job requirements from specifications, drawings, job sheets or work instructions |
|
Completed |
Evidence:
|
Identify bus and control system components and location
|
|
Examine appropriate drawings, specifications and manuals for bus and control system information Completed |
Evidence:
|
Perform a visual inspection of equipment and identify location and any obvious faults in bus and control system wiring and components |
|
Completed |
Evidence:
|
Check bus and control system wiring and rectify faults
|
|
Ensure battery is charged and charging system is operating correctly Completed |
Evidence:
|
Test voltage supply, input voltage and ground |
|
Completed |
Evidence:
|
Assess and rectify wiring faults
|
|
Isolate wiring and sensor faults Completed |
Evidence:
|
Determine replacement sensors and cables/wires, including size and insulation quality |
|
Completed |
Evidence:
|
Make up wiring looms for application and securely fix |
|
Completed |
Evidence:
|
Strip, fit, prepare and terminate wiring and cables |
|
Completed |
Evidence:
|
Test terminated cables for continuity and to comply with requirements |
|
Completed |
Evidence:
|
Remove corrosion, neutralise and apply appropriate protective coating |
|
Completed |
Evidence:
|
Test sensors, relays, solenoids, contacts and circuits and repair/replace |
|
Completed |
Evidence:
|