NTISthis.com

Evidence Guide: MSATCM514A - Select surface treatment methods for metallic components or products

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSATCM514A - Select surface treatment methods for metallic components or products

What evidence can you provide to prove your understanding of each of the following citeria?

Identify surface treatment methods by their principal properties

  1. The principal properties of different surface treatments for metals and alloys are identified.
  2. The process route for each surface treatment is identified
  3. The advantages and disadvantages of using different methods are identified.
  4. The effects of different types of bonding in materials are identified.
  5. The effects of mechanical and thermal processes on the principal properties of materials are identified.
The principal properties of different surface treatments for metals and alloys are identified.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

The process route for each surface treatment is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

The advantages and disadvantages of using different methods are identified.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

The effects of different types of bonding in materials are identified.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

The effects of mechanical and thermal processes on the principal properties of materials are identified.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select surface treatment methods for specific applications

  1. The surface treatment requirement for the specific application is determined.
  2. Surface treatment method is selected based on the requirement and consideration of principal properties.
  3. Selection is confirmed according to standard operating procedures.
The surface treatment requirement for the specific application is determined.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Surface treatment method is selected based on the requirement and consideration of principal properties.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Selection is confirmed according to standard operating procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Verify selected surface treatment methods as fit for purpose

  1. Appropriate tests for the required properties are identified.
  2. Testing of coatings is arranged with appropriate persons, if necessary.
  3. Test results are analysed and material choices are confirmed or modified as appropriate.
Appropriate tests for the required properties are identified.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Testing of coatings is arranged with appropriate persons, if necessary.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test results are analysed and material choices are confirmed or modified as appropriate.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to select surface treatment methods for metallic components or products. Critical aspects for assessment and evidence are required to demonstrate competency in this unit.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence is demonstrated in the ability to:

identify properties of surface to be treated or protected

select appropriate surface treatment process for surface and protection need

specify and evaluate tests of surface treated metals and alloys

Relationship to other units

This unit may be assessed concurrently with other relevant units.

Assessment method and context

Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the elements, performance criteria, skills and knowledge. A holistic approach should be taken to the assessment.

Assessors should gather sufficient, fair, valid, reliable, authentic and current evidence from a range of sources. Sources of evidence may include direct observation, reports from supervisors, peers and colleagues, project work, samples, organisation records and questioning. Assessment should not require language, literacy or numeracy skills beyond those required for the unit.

The assessee will have access to all techniques, procedures, information, resources and aids which would normally be available in the workplace. The method of assessment should be discussed and agreed with the assessee prior to the commencement of assessment.

Resource implications

This section should be read in conjunction with the range of variables for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.

Required Skills and Knowledge

This describes the essential skills and knowledge and their level, required for this unit.

Required skills:

undertake research

select surface treatment process and materials to match application outcome

carry out tests appropriate to the metal or alloy and surface treatment material

read, interpret and follow information on written job instructions, specifications, standard operating procedures, charts, lists, drawings and other applicable reference documents

Required knowledge:

Competency includes sufficient knowledge of:

surface treatment methods and principles as specified in the range statement

limitations of selected surface treatment processes

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Codes of practice/standards

Where reference is made to industry codes of practice, and/or Australian/international standards, it is expected the latest version will be used.

Surface preparation methods include

descaling

mechanical finishing

solvent cleaning

alkaline cleaning

measurement of surface cleanliness

Theory of electroplating includes:

electrical circuits

current density, limiting of current density

Faraday's laws

electrolytic conductivity

polarisation

standard electrope potential

co-deposition of hydrogen

codeposition of metals

throwing power

levelling and brightening

distribution of deposits

anodes

the hull cell as the major quality control in electroplating

current density

ph

evaluation of electroplating

testing of thickness of deposit and adhesion

to understand the various methods of thickness and adhesive tests and their effectiveness.

evaluation of the characteristics of copper nickel and chromium plating

operational contrast

solution concentration

bath analysis

temperature

conditions for bright plating

effect of impurities

anodising aluminium

the principles of anodising, colouring, sealing, and testing of anodised coatings.

methods of applying zinc

hot dip galvanising

continuous electrolytic tin plating

evaluation of continuous plating

comparison of zinc coating methods

metal spraying

sheradizing

zinc rich paints

practices in particular the halogen tin plating bath

vitreous enamelling

Surface treatment requirement

Surface treatment requirements may be for:

engineering

corrosion resistance

conductivity

aesthetics

other reasons

Surface treatment requirements may be determined alone by a metallurgist or in conjunction with other experts and clients.

Appropriate tests

Tests which can be undertaken by a technician within the organisation as well as those required to be undertaken by external organisations, including simple tests.

Appropriate persons

Internal technicians and/or external organisations