NTISthis.com

Evidence Guide: MSFFP2005 - Join furnishing materials

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFFP2005 - Join furnishing materials

What evidence can you provide to prove your understanding of each of the following citeria?

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Identify job requirements, including process, materials, finish and quantity, from specifications, drawings, designs, project sheets or work instructions

1.2

Identify the workplace, health and safety (WHS) practices and procedures to be used

2

Plan and prepare for work

2.1

Develop a work plan to logically sequence each stage

2.2

Determine the procedures for checking quality at each stage of the process

2.3

Select a suitable work area for the task

2.4

Identify and check tools and equipment for the application for safe and effective operation

3

Lay out and prepare materials

3.1

Select and check materials for defects following work instructions

3.2

Select and prepare suitable joining processes and methods

3.3

Prepare and lay out materials for joining

4

Join materials

4.1

Comply with work, health and safety (WHS) requirements at all times

4.2

Use appropriate personal protective equipment (PPE) in accordance with procedures

4.3

Measure, mark and cut to size materials in accordance with requirements

4.4

Apply adhesives according to work procedures and/or manufacturer instructions

4.5

Join materials and complete final trim and finishing to specifications

4.6

Check work against quality requirements

5

Check work area and maintain equipment

5.1

Clean equipment and inspect for serviceable condition and store and report faulty and/or defective equipment in accordance with procedures

5.2

Store or dispose of materials according to procedures

5.3

Clean and maintain work area

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Identify job requirements, including process, materials, finish and quantity, from specifications, drawings, designs, project sheets or work instructions

1.2

Identify the workplace, health and safety (WHS) practices and procedures to be used

2

Plan and prepare for work

2.1

Develop a work plan to logically sequence each stage

2.2

Determine the procedures for checking quality at each stage of the process

2.3

Select a suitable work area for the task

2.4

Identify and check tools and equipment for the application for safe and effective operation

3

Lay out and prepare materials

3.1

Select and check materials for defects following work instructions

3.2

Select and prepare suitable joining processes and methods

3.3

Prepare and lay out materials for joining

4

Join materials

4.1

Comply with work, health and safety (WHS) requirements at all times

4.2

Use appropriate personal protective equipment (PPE) in accordance with procedures

4.3

Measure, mark and cut to size materials in accordance with requirements

4.4

Apply adhesives according to work procedures and/or manufacturer instructions

4.5

Join materials and complete final trim and finishing to specifications

4.6

Check work against quality requirements

5

Check work area and maintain equipment

5.1

Clean equipment and inspect for serviceable condition and store and report faulty and/or defective equipment in accordance with procedures

5.2

Store or dispose of materials according to procedures

5.3

Clean and maintain work area

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria and include:

following work instructions, procedures and safe work practices

identifying and interpreting project sheets, specifications, drawings and other relevant information in joining furnishing materials

applying safe handling requirements for equipment, products and materials, including the use of PPE

identifying and selecting materials and joining methods to be used in the work process

using mathematical ideas and techniques to complete measurements, including calculating area and estimating material requirements

using tools and equipment in a safe and effective manner

joining a minimum of the following:

two (2) timber products – one (1) hardwood and one (1) softwood

and

one (1) composite product

inspecting finished product against quality requirements

minimising wastage of resources, including materials, time and money

communicating and working effectively and safely with others.

Evidence required to demonstrate the required knowledge for this unit must be relevant to and satisfy the requirements of the elements and performance criteria and include knowledge of:

safe work practices and procedures and use of PPE

types, characteristics, uses and limitations of timbers, composite and plastic materials

joining techniques and their effect on materials

types of joining methods and the impact of these on joining materials

preparation of drawings/set-outs

identification of hand and/or power tools, materials, equipment, processes and procedures

sequences in relation to joining materials.

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

PPE includes one (1) or more of the following:

safety glasses

face and head protection

protective footwear

protective clothing

respiratory protection

ear protection

gloves

Joining methods include two (2) or more of the following:

butt

dowel

biscuit joint

domino

matched joint

rebate joint

Machinery includes one (1) or more of the following:

docking saw

rip saw

sanders

vertical and horizontal drills

biscuit machine

domino machine

Tools and equipment include one (1) or more of the following:

measuring tapes and rulers

hammers

mallets

squares

bevels

chisels

planes

hand saws

power drills

biscuit machine

domino machine

dowel jigs

clamps and cramps

abrasives

cleaning materials

Materials include two (2) or more of the following:

timber softwoods and hardwoods

composites

plastic

adhesives