NTISthis.com

Evidence Guide: MSFGG1001 - Complete a basic glass and glazing project

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFGG1001 - Complete a basic glass and glazing project

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Work instructions are used to determine job requirements for a basic glass and glazing job, including design variations, tolerances, process, materials, finish and quantity
  2. Work sequence is planned and procedures are determined for checking quality at each stage of the process
  3. Work health and safety requirements (WHS), including personal protective equipment, are observed throughout the work
  4. Preparatory drawings/set-outs for tasks are confirmed and a suitable work area selected
  5. Materials are selected following work instructions
  6. Tools and equipment and a table suitable for the work are identified and checked for safe and effective operation
Work instructions are used to determine job requirements for a basic glass and glazing job, including design variations, tolerances, process, materials, finish and quantity

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work sequence is planned and procedures are determined for checking quality at each stage of the process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety requirements (WHS), including personal protective equipment, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Preparatory drawings/set-outs for tasks are confirmed and a suitable work area selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials are selected following work instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment and a table suitable for the work are identified and checked for safe and effective operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabricate and assemble components

  1. Material is set out according to work instructions, prepared, and components marked according to workplace procedures
  2. Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
  3. Components are fabricated, including any specified shapes, angles or curves, and checked against set-out and job requirements
  4. Components are fitted to job requirements and the assembly process undertaken according to workplace procedures
  5. Item is checked for compliance with specifications and finished in accordance with work instructions using edging equipment, where required
Material is set out according to work instructions, prepared, and components marked according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Components are fabricated, including any specified shapes, angles or curves, and checked against set-out and job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Components are fitted to job requirements and the assembly process undertaken according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Item is checked for compliance with specifications and finished in accordance with work instructions using edging equipment, where required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Finalise operation and maintain equipment

  1. Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
  2. Off-cuts and unused materials are collected and stored for re-use or disposed of following workplace procedures
  3. Waste and scrap materials are dealt with following workplace procedures
Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Off-cuts and unused materials are collected and stored for re-use or disposed of following workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste and scrap materials are dealt with following workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Work instructions are used to determine job requirements for a basic glass and glazing job, including design variations, tolerances, process, materials, finish and quantity

1.2

Work sequence is planned and procedures are determined for checking quality at each stage of the process

1.3

Work health and safety requirements (WHS), including personal protective equipment, are observed throughout the work

1.4

Preparatory drawings/set-outs for tasks are confirmed and a suitable work area selected

1.5

Materials are selected following work instructions

1.6

Tools and equipment and a table suitable for the work are identified and checked for safe and effective operation

2

Fabricate and assemble components

2.1

Material is set out according to work instructions, prepared, and components marked according to workplace procedures

2.2

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

2.3

Components are fabricated, including any specified shapes, angles or curves, and checked against set-out and job requirements

2.4

Components are fitted to job requirements and the assembly process undertaken according to workplace procedures

2.5

Item is checked for compliance with specifications and finished in accordance with work instructions using edging equipment, where required

3

Finalise operation and maintain equipment

3.1

Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures

3.2

Off-cuts and unused materials are collected and stored for re-use or disposed of following workplace procedures

3.3

Waste and scrap materials are dealt with following workplace procedures

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Work instructions are used to determine job requirements for a basic glass and glazing job, including design variations, tolerances, process, materials, finish and quantity

1.2

Work sequence is planned and procedures are determined for checking quality at each stage of the process

1.3

Work health and safety requirements (WHS), including personal protective equipment, are observed throughout the work

1.4

Preparatory drawings/set-outs for tasks are confirmed and a suitable work area selected

1.5

Materials are selected following work instructions

1.6

Tools and equipment and a table suitable for the work are identified and checked for safe and effective operation

2

Fabricate and assemble components

2.1

Material is set out according to work instructions, prepared, and components marked according to workplace procedures

2.2

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

2.3

Components are fabricated, including any specified shapes, angles or curves, and checked against set-out and job requirements

2.4

Components are fitted to job requirements and the assembly process undertaken according to workplace procedures

2.5

Item is checked for compliance with specifications and finished in accordance with work instructions using edging equipment, where required

3

Finalise operation and maintain equipment

3.1

Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures

3.2

Off-cuts and unused materials are collected and stored for re-use or disposed of following workplace procedures

3.3

Waste and scrap materials are dealt with following workplace procedures

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Adapt or vary glass and glazing designs and prepare, fabricate and assemble at least one (1) basic glass and glazing project which:

is of thin glass (annealed glass or laminated glass of less than or 7 mm thick)

requires the use of glass and glazing hand tools and basic glass and glazing processing machines

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Interpretation of plan representation of product design

Preparation of drawings/set-outs

Work flow requirements in relation to glass and glazing projects

Identification of glass and glazing hand and basic processing tools, materials, equipment, processes and procedures

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving

Work instructions include:

reading and interpreting plans

developing set-outs

using hand and power tools

operating basic machinery

applying quality requirements

applying product finishing techniques and materials

A basic glass and glazing project includes:

fish tank

display case

flower vase/box

ornamental box/case

Tools and equipment include:

flat felt covered cutting tables

tungsten wheel glass cutters

speed cutters

circle cutters

L-squares and straight edges

tape measures

glass handling gloves

safety glasses

gauntlets

aprons

marking pens

chinagraph pencils

templates and lubricants

drilling equipment (e.g. portable or wall-mounted)

free-standing diamond drill presses and saws

Tables appropriate for cutting large glass sheets include:

air flotation tables

roller castor tables or tilt tables with air flotation

breaker bars or roller castors

Materials include:

annealed glass (less than or 7 mm thick) and laminated glass (less than or 6.38 mm thick) as deemed appropriate for the project

Edging equipment includes:

linishing or belt machines

diamond or pencil edgers

pumice or cork polishers

horizontal wheels

finger slotters

hand tools

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices:

gloves

safety glasses

gauntlets

footwear

earmuffs

aprons and overalls

Information and procedures include:

workplace procedures relating to the use of tools and equipment and personal protective equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures

AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass