The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify work requirements
|
|
Work requirements for the type of glass to be used and the method of fixing are identified from work instructions Completed |
Evidence:
|
Work health and safety (WHS) requirements for glazing/re-glazing of windows and doors, including personal protective equipment, are observed throughout the work Completed |
Evidence:
|
The process for fitting glass to window and doorframes is identified Completed |
Evidence:
|
Prepare for work
|
|
Work sequence is planned in a logical order to suit the job and in accordance with workplace procedures Completed |
Evidence:
|
Tools, equipment and materials (other than glass and frames) are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition Completed |
Evidence:
|
Type of glass to be fitted and frames are selected to match job requirements and glass checked for type, size and imperfections Completed |
Evidence:
|
Glass fixing method is selected and frame condition is assessed to ensure suitability for glazing in accordance with customer order and Australian Standards Completed |
Evidence:
|
Defective frames are reported for repair or replacement in accordance with workplace procedures Completed |
Evidence:
|
Fixing and sealing materials are prepared by mixing or cutting to length, as appropriate Completed |
Evidence:
|
Identify site conditions and restraints
|
|
On-site difficulties are recognised and corrective action taken in accordance with regulations and workplace requirements Completed |
Evidence:
|
Covering material is applied, where necessary, to protect existing fixtures and fittings Completed |
Evidence:
|
Special characteristics of the window or door which may affect the finished job are identified and corrective action taken Completed |
Evidence:
|
Prefabricated, modular scaffolding system to a maximum of one platform is erected safely and in the correct order of assembly, if required Completed |
Evidence:
|
Access stairway or ladder and edge protection components are fitted to the modular scaffolding, where used Completed |
Evidence:
|
Perform glazing
|
|
Frame is prepared to receive glass by checking size against specifications, removing remains of glass and any sealants, cleaning and surface preparation, if required Completed |
Evidence:
|
Glass is fixed to the frame using the selected method and in accordance with recognised industry procedures and Australian Standards Completed |
Evidence:
|
Solvents and sealants are used in accordance with manufacturer recommendations and Australian Standards Completed |
Evidence:
|
Excess sealing material is removed and glass and frame cleaned after fixing Completed |
Evidence:
|
Complete work
|
|
Completed installation is checked to ensure compliance with customer requirements and specifications Completed |
Evidence:
|
Prefabricated modular scaffolding, where used, is dismantled safely in the correct order and packed for transport Completed |
Evidence:
|
Tools, equipment and materials are cleaned and stored following workplace procedures Completed |
Evidence:
|
Work area is cleaned and left in a safe condition and rubbish disposed of, as appropriate Completed |
Evidence:
|
Waste and scrap materials are removed for disposal or recycling, as required Completed |
Evidence:
|
Workplace documentation is completed in accordance with workplace requirements including calculating the cost of glass, fittings, materials and labour Completed |
Evidence:
|