NTISthis.com

Evidence Guide: MSFGG3014 - Construct and repair leadlight panels

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFGG3014 - Construct and repair leadlight panels

What evidence can you provide to prove your understanding of each of the following citeria?

Identify work requirements

  1. Purpose of the leadlight panel is established, including performance requirements in terms of safety, quality and function
  2. Research is conducted, where necessary, to establish if leadlight panels to be repaired are historically important
  3. Construction method and materials to be used in the panel to be constructed or repaired are identified
  4. Leadlight panel to be repaired is inspected to identify faults and any faults found compared with customer requirements and any previous identified faults
Purpose of the leadlight panel is established, including performance requirements in terms of safety, quality and function

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Research is conducted, where necessary, to establish if leadlight panels to be repaired are historically important

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Construction method and materials to be used in the panel to be constructed or repaired are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Leadlight panel to be repaired is inspected to identify faults and any faults found compared with customer requirements and any previous identified faults

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plan leadlight panel construction/repair

  1. Plan or design of leadlight panel to be constructed/repaired is analysed to identify work requirements, methods and/or specifications
  2. Work health and safety (WHS) requirements for construction and repair of leadlight panels, including personal protective equipment, are observed throughout the work
  3. Work sequences are identified and a personal work plan is developed, when required, compliant with workplace procedures
  4. Steps or stages in construction/repair are planned, noting check points for (any) measurements and tests
  5. Approval of work construction plan is obtained as required by workplace procedures and a suitable work area identified
Plan or design of leadlight panel to be constructed/repaired is analysed to identify work requirements, methods and/or specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS) requirements for construction and repair of leadlight panels, including personal protective equipment, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work sequences are identified and a personal work plan is developed, when required, compliant with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Steps or stages in construction/repair are planned, noting check points for (any) measurements and tests

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Approval of work construction plan is obtained as required by workplace procedures and a suitable work area identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify suitable materials and equipment

  1. Tools and equipment are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition
  2. Leadlight construction materials are selected according to specification of performance requirements, proposed use, cost and availability of materials, if required, matching the original texture, colour, thickness and opacity of the stained glass
  3. Equipment suitable for working the chosen material is identified
Tools and equipment are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Leadlight construction materials are selected according to specification of performance requirements, proposed use, cost and availability of materials, if required, matching the original texture, colour, thickness and opacity of the stained glass

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment suitable for working the chosen material is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Construct/repair the leadlight panel

  1. Plan is followed to construct/repair the leadlight panel, including any special requirements for historically important works
  2. Checks are conducted at the identified points
  3. Modifications are identified and recommended within workplace procedures
  4. Modifications to the plan are documented and appropriate approvals are sought in accordance with workplace procedures
Plan is followed to construct/repair the leadlight panel, including any special requirements for historically important works

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Checks are conducted at the identified points

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Modifications are identified and recommended within workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Modifications to the plan are documented and appropriate approvals are sought in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work

  1. Leadlight panel is inspected for quality of work and repaired or reconstructed, as required, in accordance with workplace procedures
  2. Material which can be re-used is collected and stored
  3. Waste and scrap material are removed for disposal or recycling, as required
  4. Work area is cleaned and rubbish disposed of, as appropriate
  5. Equipment is cleaned and stored according to workplace requirements
  6. Workplace documentation is completed in accordance with workplace procedures
Leadlight panel is inspected for quality of work and repaired or reconstructed, as required, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material which can be re-used is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste and scrap material are removed for disposal or recycling, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned and rubbish disposed of, as appropriate

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is cleaned and stored according to workplace requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is completed in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify work requirements

1.1

Purpose of the leadlight panel is established, including performance requirements in terms of safety, quality and function

1.2

Research is conducted, where necessary, to establish if leadlight panels to be repaired are historically important

1.3

Construction method and materials to be used in the panel to be constructed or repaired are identified

1.4

Leadlight panel to be repaired is inspected to identify faults and any faults found compared with customer requirements and any previous identified faults

2

Plan leadlight panel construction/repair

2.1

Plan or design of leadlight panel to be constructed/repaired is analysed to identify work requirements, methods and/or specifications

2.2

Work health and safety (WHS) requirements for construction and repair of leadlight panels, including personal protective equipment, are observed throughout the work

2.3

Work sequences are identified and a personal work plan is developed, when required, compliant with workplace procedures

2.4

Steps or stages in construction/repair are planned, noting check points for (any) measurements and tests

2.5

Approval of work construction plan is obtained as required by workplace procedures and a suitable work area identified

3

Identify suitable materials and equipment

3.1

Tools and equipment are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition

3.2

Leadlight construction materials are selected according to specification of performance requirements, proposed use, cost and availability of materials, if required, matching the original texture, colour, thickness and opacity of the stained glass

3.3

Equipment suitable for working the chosen material is identified

4

Construct/repair the leadlight panel

4.1

Plan is followed to construct/repair the leadlight panel, including any special requirements for historically important works

4.2

Checks are conducted at the identified points

4.3

Modifications are identified and recommended within workplace procedures

4.4

Modifications to the plan are documented and appropriate approvals are sought in accordance with workplace procedures

5

Complete work

5.1

Leadlight panel is inspected for quality of work and repaired or reconstructed, as required, in accordance with workplace procedures

5.2

Material which can be re-used is collected and stored

5.3

Waste and scrap material are removed for disposal or recycling, as required

5.4

Work area is cleaned and rubbish disposed of, as appropriate

5.5

Equipment is cleaned and stored according to workplace requirements

5.6

Workplace documentation is completed in accordance with workplace procedures

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify work requirements

1.1

Purpose of the leadlight panel is established, including performance requirements in terms of safety, quality and function

1.2

Research is conducted, where necessary, to establish if leadlight panels to be repaired are historically important

1.3

Construction method and materials to be used in the panel to be constructed or repaired are identified

1.4

Leadlight panel to be repaired is inspected to identify faults and any faults found compared with customer requirements and any previous identified faults

2

Plan leadlight panel construction/repair

2.1

Plan or design of leadlight panel to be constructed/repaired is analysed to identify work requirements, methods and/or specifications

2.2

Work health and safety (WHS) requirements for construction and repair of leadlight panels, including personal protective equipment, are observed throughout the work

2.3

Work sequences are identified and a personal work plan is developed, when required, compliant with workplace procedures

2.4

Steps or stages in construction/repair are planned, noting check points for (any) measurements and tests

2.5

Approval of work construction plan is obtained as required by workplace procedures and a suitable work area identified

3

Identify suitable materials and equipment

3.1

Tools and equipment are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition

3.2

Leadlight construction materials are selected according to specification of performance requirements, proposed use, cost and availability of materials, if required, matching the original texture, colour, thickness and opacity of the stained glass

3.3

Equipment suitable for working the chosen material is identified

4

Construct/repair the leadlight panel

4.1

Plan is followed to construct/repair the leadlight panel, including any special requirements for historically important works

4.2

Checks are conducted at the identified points

4.3

Modifications are identified and recommended within workplace procedures

4.4

Modifications to the plan are documented and appropriate approvals are sought in accordance with workplace procedures

5

Complete work

5.1

Leadlight panel is inspected for quality of work and repaired or reconstructed, as required, in accordance with workplace procedures

5.2

Material which can be re-used is collected and stored

5.3

Waste and scrap material are removed for disposal or recycling, as required

5.4

Work area is cleaned and rubbish disposed of, as appropriate

5.5

Equipment is cleaned and stored according to workplace requirements

5.6

Workplace documentation is completed in accordance with workplace procedures

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Interpret work order/job instruction to identify requirements and plan the process to construct/repair leadlight panels

Select and use appropriate materials and processes for the panel being constructed/repaired optimising glass sizes for economical cutting and assembling of required materials

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

End use of leadlight panels and required safety, quality and structural standards

Characteristics, including hazards and workplace safety system requirements, associated with the materials used in leadlight panel construction

Operation of tools and equipment used in constructing/repairing leadlight panels

Research techniques to establish the historical importance of stained glass and leadlighting works

Processes and procedures involved in the construction/repair process of leadlight panels, including historically important works

Impact of design features of the leadlight panel on purpose, materials and construction

Relevant Australian Standards

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving

Repair methods include:

re-leading

strap repair and lead lifting

restoration and conservation of historically important stained glass and leadlighting works

Tools and equipment include:

timber benches

light boxes

glass grinders

lead knives

lead vice

lathekins

farrier's nails

glass cutters

grozing and small running pliers

soldering irons and bits

suede

cleaning and polishing brushers and pickers

Leadlight construction materials include:

coloured/plain glass panels

patterns/templates

timber lathes

ornamental fittings

lead came

solder and fluxes

Personal protective equipment includes:

that prescribed under legislation, regulation and enterprise policies and practices:

gauntlets

gloves

safety glasses

safety footwear

Information and procedures include:

workplace procedures relating to the use of tools and equipment and personal protective equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures

quality and Australian Standards and procedures