NTISthis.com

Evidence Guide: MSFPF1001 - Frame a simple artwork

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFPF1001 - Frame a simple artwork

What evidence can you provide to prove your understanding of each of the following citeria?

Design artwork package

  1. Artwork to be framed is identified and its qualities and framing requirements assessed
  2. A provisional design package is developed
  3. Design is modified as required and approved in accordance with workplace procedures
  4. Work sequence is planned to suit the job
Artwork to be framed is identified and its qualities and framing requirements assessed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

A provisional design package is developed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Design is modified as required and approved in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work sequence is planned to suit the job

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cut and join mouldings

  1. Work health safety (WHS) requirements, including personal protection needs, are observed throughout the work
  2. Tools, equipment and materials required for cutting and joining of mouldings are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
  3. Material is set out for cutting to length according to work instructions and workplace procedures
  4. Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
  5. Mouldings are cut to length and checked for quality and fit in accordance with workplace practices
  6. Components are laid out and fixed in preparation for joining according to work instructions and workplace procedures
  7. Components are joined and checked for quality, alignment and finish according to workplace practices
Work health safety (WHS) requirements, including personal protection needs, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials required for cutting and joining of mouldings are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material is set out for cutting to length according to work instructions and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mouldings are cut to length and checked for quality and fit in accordance with workplace practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Components are laid out and fixed in preparation for joining according to work instructions and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Components are joined and checked for quality, alignment and finish according to workplace practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cut mat board

  1. Tools, equipment and materials required for cutting mat board are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
  2. Mat board material is set out for cutting according to work instructions and workplace procedures
  3. Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
  4. Mat boards are cut and checked for quality in accordance with workplace practices
Tools, equipment and materials required for cutting mat board are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mat board material is set out for cutting according to work instructions and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mat boards are cut and checked for quality in accordance with workplace practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cut glass for framing

  1. Tools, equipment and materials required for cutting glass are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
  2. Glass is set out for cutting according to work instructions and workplace procedures
  3. Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
  4. Glass is cut and checked for quality in accordance with workplace practices
Tools, equipment and materials required for cutting glass are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass is set out for cutting according to work instructions and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass is cut and checked for quality in accordance with workplace practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mount artwork

  1. Method of mounting is determined
  2. Mounting equipment is set up according to operating procedures and workplace practice
  3. Artwork is positioned on substrate according to job requirements and placed in mounting equipment
  4. Mounting equipment is operated in accordance with manufacturer instructions and workplace procedures
  5. Assembled artwork is removed from equipment, inspected for quality in accordance with workplace procedures
Method of mounting is determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mounting equipment is set up according to operating procedures and workplace practice

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Artwork is positioned on substrate according to job requirements and placed in mounting equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mounting equipment is operated in accordance with manufacturer instructions and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assembled artwork is removed from equipment, inspected for quality in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assemble artwork package

  1. Fabricated components are cleaned and laid out for assembly in accordance with workplace procedures
  2. Artwork is attached to backing material using the selected method
  3. Frame components are assembled and adjusted, as required, to fit and fixed in place
  4. Frame is fitted over package and the backing is fixed in accordance with workplace procedures
  5. Fittings, attachments and hanging aids are attached in accordance with workplace procedures
  6. Package is inspected for quality and processed in accordance with workplace procedures
Fabricated components are cleaned and laid out for assembly in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Artwork is attached to backing material using the selected method

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Frame components are assembled and adjusted, as required, to fit and fixed in place

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Frame is fitted over package and the backing is fixed in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fittings, attachments and hanging aids are attached in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Package is inspected for quality and processed in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work

  1. Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
  2. Off-cuts and unused materials are collected and stored for re-use or disposed following workplace procedures
  3. Waste and scrap materials are dealt with following workplace procedures
Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Off-cuts and unused materials are collected and stored for re-use or disposed following workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste and scrap materials are dealt with following workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Design artwork package

1.1

Artwork to be framed is identified and its qualities and framing requirements assessed

1.2

A provisional design package is developed

1.3

Design is modified as required and approved in accordance with workplace procedures

1.4

Work sequence is planned to suit the job

2

Cut and join mouldings

2.1

Work health safety (WHS) requirements, including personal protection needs, are observed throughout the work

2.2

Tools, equipment and materials required for cutting and joining of mouldings are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

2.3

Material is set out for cutting to length according to work instructions and workplace procedures

2.4

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

2.5

Mouldings are cut to length and checked for quality and fit in accordance with workplace practices

2.6

Components are laid out and fixed in preparation for joining according to work instructions and workplace procedures

2.7

Components are joined and checked for quality, alignment and finish according to workplace practices

3

Cut mat board

3.1

Tools, equipment and materials required for cutting mat board are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

3.2

Mat board material is set out for cutting according to work instructions and workplace procedures

3.3

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

3.4

Mat boards are cut and checked for quality in accordance with workplace practices

4

Cut glass for framing

4.1

Tools, equipment and materials required for cutting glass are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

4.2

Glass is set out for cutting according to work instructions and workplace procedures

4.3

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

4.3

Glass is cut and checked for quality in accordance with workplace practices

5

Mount artwork

5.1

Method of mounting is determined

5.2

Mounting equipment is set up according to operating procedures and workplace practice

5.3

Artwork is positioned on substrate according to job requirements and placed in mounting equipment

5.4

Mounting equipment is operated in accordance with manufacturer instructions and workplace procedures

5.5

Assembled artwork is removed from equipment, inspected for quality in accordance with workplace procedures

6

Assemble artwork package

6.1

Fabricated components are cleaned and laid out for assembly in accordance with workplace procedures

6.2

Artwork is attached to backing material using the selected method

6.3

Frame components are assembled and adjusted, as required, to fit and fixed in place

6.4

Frame is fitted over package and the backing is fixed in accordance with workplace procedures

6.5

Fittings, attachments and hanging aids are attached in accordance with workplace procedures

6.6

Package is inspected for quality and processed in accordance with workplace procedures

7

Complete work

7.1

Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures

7.2

Off-cuts and unused materials are collected and stored for re-use or disposed following workplace procedures

7.3

Waste and scrap materials are dealt with following workplace procedures

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Design artwork package

1.1

Artwork to be framed is identified and its qualities and framing requirements assessed

1.2

A provisional design package is developed

1.3

Design is modified as required and approved in accordance with workplace procedures

1.4

Work sequence is planned to suit the job

2

Cut and join mouldings

2.1

Work health safety (WHS) requirements, including personal protection needs, are observed throughout the work

2.2

Tools, equipment and materials required for cutting and joining of mouldings are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

2.3

Material is set out for cutting to length according to work instructions and workplace procedures

2.4

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

2.5

Mouldings are cut to length and checked for quality and fit in accordance with workplace practices

2.6

Components are laid out and fixed in preparation for joining according to work instructions and workplace procedures

2.7

Components are joined and checked for quality, alignment and finish according to workplace practices

3

Cut mat board

3.1

Tools, equipment and materials required for cutting mat board are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

3.2

Mat board material is set out for cutting according to work instructions and workplace procedures

3.3

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

3.4

Mat boards are cut and checked for quality in accordance with workplace practices

4

Cut glass for framing

4.1

Tools, equipment and materials required for cutting glass are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

4.2

Glass is set out for cutting according to work instructions and workplace procedures

4.3

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

4.3

Glass is cut and checked for quality in accordance with workplace practices

5

Mount artwork

5.1

Method of mounting is determined

5.2

Mounting equipment is set up according to operating procedures and workplace practice

5.3

Artwork is positioned on substrate according to job requirements and placed in mounting equipment

5.4

Mounting equipment is operated in accordance with manufacturer instructions and workplace procedures

5.5

Assembled artwork is removed from equipment, inspected for quality in accordance with workplace procedures

6

Assemble artwork package

6.1

Fabricated components are cleaned and laid out for assembly in accordance with workplace procedures

6.2

Artwork is attached to backing material using the selected method

6.3

Frame components are assembled and adjusted, as required, to fit and fixed in place

6.4

Frame is fitted over package and the backing is fixed in accordance with workplace procedures

6.5

Fittings, attachments and hanging aids are attached in accordance with workplace procedures

6.6

Package is inspected for quality and processed in accordance with workplace procedures

7

Complete work

7.1

Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures

7.2

Off-cuts and unused materials are collected and stored for re-use or disposed following workplace procedures

7.3

Waste and scrap materials are dealt with following workplace procedures

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Adapt or vary glass and glazing designs

As a minimum, design, prepare, fabricate and assemble one (1) item of simple artwork

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Design requirements for simple artwork

Preparation of plans/drawings/set-outs

Work flow and steps in relation to framing simple artwork

Identification of hand and basic picture framing processing tools, materials, equipment, processes and procedures

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work involves reading and interpreting plans, developing set-outs, using hand and power tools, operating basic machinery, applying quality requirements, applying product finishing techniques and materials, and is conducted under supervision and guidance

Simple artwork includes:

flat paper-based artwork not requiring any conservation measures

Tools and equipment include:

guillotines

static mounted circular saws

drop saws

docking saws

mitre saws

underpinners (V-nailers)

screwdrivers

hand-operated tools:

cutting blades

clamps

marking out tools

mat cutters

appropriate mounting tools and equipment

flat felt-covered cutting table

glass cutters

squares

tape measures

marking pens/pencils

Materials include:

timber

touch-up materials

glues

sandpaper

standard mat board material

appropriate mounting materials

glass

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies:

gloves

safety glasses

gauntlets

footwear

earmuffs

aprons and overalls

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures