NTISthis.com

Evidence Guide: MSFSF2006 - Calculate fabric quantities for window coverings

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFSF2006 - Calculate fabric quantities for window coverings

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for calculations

  1. Measuring and calculating equipment are collected
  2. Mathematical processes and guide charts required are identified
  3. Drape requirements, fabric types and lining/interlining requirements are noted from work order
Measuring and calculating equipment are collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mathematical processes and guide charts required are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Drape requirements, fabric types and lining/interlining requirements are noted from work order

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Calculate drape fabric requirements

  1. Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work
  2. Fabric repeats are measured for customer selected fabrics and recorded
  3. Fabric width is checked taking note of any wider than usual selvages
  4. Finished length of window covering is identified from order
  5. Heading type is identified from order and fullness ratio is identified
  6. Number of fabric drops per curtain is calculated
  7. Length of each fabric drop is calculated based on finished length plus hem and heading allowances and pattern repeats
  8. Allowances for seams, hems, headings, drape fullness or heading type are noted on the work order
Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabric repeats are measured for customer selected fabrics and recorded

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabric width is checked taking note of any wider than usual selvages

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Finished length of window covering is identified from order

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Heading type is identified from order and fullness ratio is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Number of fabric drops per curtain is calculated

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Length of each fabric drop is calculated based on finished length plus hem and heading allowances and pattern repeats

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Allowances for seams, hems, headings, drape fullness or heading type are noted on the work order

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Calculate lining and interlining quantities

  1. Width of lining and, where required, interlining fabrics, is noted
  2. Number of lining/interlining widths is calculated based on required number of drape drops
  3. Length of lining/interlining drops is calculated, including hem allowances
  4. Amount of lining/interlining fabric is calculated and marked on work order
  5. Procedures for minimising waste fabric are identified and used
Width of lining and, where required, interlining fabrics, is noted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Number of lining/interlining widths is calculated based on required number of drape drops

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Length of lining/interlining drops is calculated, including hem allowances

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Amount of lining/interlining fabric is calculated and marked on work order

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Procedures for minimising waste fabric are identified and used

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete documentation

  1. Work orders for cutting and machining are completed following workplace procedures
  2. Documentation is forwarded to appropriate work areas and filed as required
Work orders for cutting and machining are completed following workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Documentation is forwarded to appropriate work areas and filed as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for calculations

1.1

Measuring and calculating equipment are collected

1.2

Mathematical processes and guide charts required are identified

1.3

Drape requirements, fabric types and lining/interlining requirements are noted from work order

2

Calculate drape fabric requirements

2.1

Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work

2.2

Fabric repeats are measured for customer selected fabrics and recorded

2.3

Fabric width is checked taking note of any wider than usual selvages

2.4

Finished length of window covering is identified from order

2.5

Heading type is identified from order and fullness ratio is identified

2.6

Number of fabric drops per curtain is calculated

2.7

Length of each fabric drop is calculated based on finished length plus hem and heading allowances and pattern repeats

2.8

Allowances for seams, hems, headings, drape fullness or heading type are noted on the work order

3

Calculate lining and interlining quantities

3.1

Width of lining and, where required, interlining fabrics, is noted

3.2

Number of lining/interlining widths is calculated based on required number of drape drops

3.3

Length of lining/interlining drops is calculated, including hem allowances

3.4

Amount of lining/interlining fabric is calculated and marked on work order

3.5

Procedures for minimising waste fabric are identified and used

4

Complete documentation

4.1

Work orders for cutting and machining are completed following workplace procedures

4.2

Documentation is forwarded to appropriate work areas and filed as required

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for calculations

1.1

Measuring and calculating equipment are collected

1.2

Mathematical processes and guide charts required are identified

1.3

Drape requirements, fabric types and lining/interlining requirements are noted from work order

2

Calculate drape fabric requirements

2.1

Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work

2.2

Fabric repeats are measured for customer selected fabrics and recorded

2.3

Fabric width is checked taking note of any wider than usual selvages

2.4

Finished length of window covering is identified from order

2.5

Heading type is identified from order and fullness ratio is identified

2.6

Number of fabric drops per curtain is calculated

2.7

Length of each fabric drop is calculated based on finished length plus hem and heading allowances and pattern repeats

2.8

Allowances for seams, hems, headings, drape fullness or heading type are noted on the work order

3

Calculate lining and interlining quantities

3.1

Width of lining and, where required, interlining fabrics, is noted

3.2

Number of lining/interlining widths is calculated based on required number of drape drops

3.3

Length of lining/interlining drops is calculated, including hem allowances

3.4

Amount of lining/interlining fabric is calculated and marked on work order

3.5

Procedures for minimising waste fabric are identified and used

4

Complete documentation

4.1

Work orders for cutting and machining are completed following workplace procedures

4.2

Documentation is forwarded to appropriate work areas and filed as required

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Interpret work order and locate and apply relevant information and measure and accurately calculate fabric quantities to minimise waste and produce consistent quality drapes for at least five (5) different types of window coverings

Identify materials used and any special marking out requirements and document calculations accurately

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Fabric types, common faults and inspection procedures

Design features of the fabrics and finished curtains in relation to attractive draping requirements

Work requirements, including workplace standards

Measurement and calculation techniques for soft furnishing materials

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving

Window covering calculations include:

calculations for fabric and lining quantities for all:

curtains

Austrian, Roman and festoon blinds

Calculation of the number of drops is based on:

useable drapery fabric width

fullness requirements for heading type

size of returns and overlaps

track width identified in customer order

Tools and equipment include:

measuring and calculating equipment

including tapes

rulers

calculators and computers

Materials include:

all forms of curtaining and other window covering material

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures