Process coloured and textured glass by hand Evidence Guide

NTISthis.com

Evidence Guide: MSFSL3008 - Process coloured and textured glass by hand

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

MSFSL3008 - Process coloured and textured glass by hand

What evidence can you provide to prove your understanding of each of the following citeria?

Completed
Date:

Teacher:

Evidence:

Assessed

Teacher: ___________________________ Date: _

Signature: ________________________________________________

Comments:

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1	Determine job requirements	1.1	Follow standard operating procedures (SOPs)
		1.2	Comply with work health and safety (WHS) requirements at all times
		1.3	Use appropriate personal protective equipment (PPE) in accordance with SOPs
		1.4	Identify job requirements, including materials, types of cuts, shapes and edges, processes and quantities required, from specifications, drawings, designs, job sheets or work instructions

2	Plan and prepare for work	2.1	Select and check tools, equipment and thin glass materials prior to use to ensure they are appropriate for the work and are in a safe and serviceable condition
		2.2	Determine cutting list and identify quality standards and procedures in accordance with workplace requirements and industry standards
		2.3	Select glass to be cut and processed to industry standard tolerances using information from the work order, including type of glass, thickness, colour, texture and dimensions
		2.4	Identify and prepare equipment and settings required to perform the work
		2.5	Plan the work sequence in a logical order to suit the job
		2.6	Select suitable cutting, shaping and lubrication methods
		2.7	Select glass processing table and clear surface and work area of debris, dust , obstructions and potential hazards with cullet bins located close to work area
		2.8	Check glass for imperfections and damage prior to handling
		2.9	Locate glass to be processed in the work area using correct manual handling techniques and procedures

3	Process glass	3.1	Measure glass within specified tolerances so as to minimise waste according to enterprise standards
		3.2	Operate and monitor tools and equipment in accordance with manufacturer instructions and workplace procedures to ensure correct quality and output
		3.3	Process glass to required standard in accordance with job order, work instructions and procedures, including the performance of routine lubrication and adjustments of tools/equipment
		3.4	Identify and report problems occurred during work operations to appropriate personnel in accordance with workplace procedures
		3.5	Follow authorised changes in working procedures and/or requirements
		3.6	Inspect completed product for quality of work and items found defective are repaired, reprocessed or discarded in accordance with workplace procedures

4	Complete work	4.1	Label and store processed glass ensuring there are no projections in accordance with procedures
		4.2	Remove scraps and off-cuts for disposal and/or recycling as required
		4.3	Remove and store tools, equipment and unused materials in accordance with SOPs
		4.4	Clean work area and dispose of rubbish as appropriate
		4.5	Complete workplace documentation in accordance with SOPs

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1	Determine job requirements	1.1	Follow standard operating procedures (SOPs)
		1.2	Comply with work health and safety (WHS) requirements at all times
		1.3	Use appropriate personal protective equipment (PPE) in accordance with SOPs
		1.4	Identify job requirements, including materials, types of cuts, shapes and edges, processes and quantities required, from specifications, drawings, designs, job sheets or work instructions

2	Plan and prepare for work	2.1	Select and check tools, equipment and thin glass materials prior to use to ensure they are appropriate for the work and are in a safe and serviceable condition
		2.2	Determine cutting list and identify quality standards and procedures in accordance with workplace requirements and industry standards
		2.3	Select glass to be cut and processed to industry standard tolerances using information from the work order, including type of glass, thickness, colour, texture and dimensions
		2.4	Identify and prepare equipment and settings required to perform the work
		2.5	Plan the work sequence in a logical order to suit the job
		2.6	Select suitable cutting, shaping and lubrication methods
		2.7	Select glass processing table and clear surface and work area of debris, dust , obstructions and potential hazards with cullet bins located close to work area
		2.8	Check glass for imperfections and damage prior to handling
		2.9	Locate glass to be processed in the work area using correct manual handling techniques and procedures

3	Process glass	3.1	Measure glass within specified tolerances so as to minimise waste according to enterprise standards
		3.2	Operate and monitor tools and equipment in accordance with manufacturer instructions and workplace procedures to ensure correct quality and output
		3.3	Process glass to required standard in accordance with job order, work instructions and procedures, including the performance of routine lubrication and adjustments of tools/equipment
		3.4	Identify and report problems occurred during work operations to appropriate personnel in accordance with workplace procedures
		3.5	Follow authorised changes in working procedures and/or requirements
		3.6	Inspect completed product for quality of work and items found defective are repaired, reprocessed or discarded in accordance with workplace procedures

4	Complete work	4.1	Label and store processed glass ensuring there are no projections in accordance with procedures
		4.2	Remove scraps and off-cuts for disposal and/or recycling as required
		4.3	Remove and store tools, equipment and unused materials in accordance with SOPs
		4.4	Clean work area and dispose of rubbish as appropriate
		4.5	Complete workplace documentation in accordance with SOPs

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria and include:

following work instructions, SOPs and safe work practices

identifying and interpreting specifications, drawings, standards and other relevant information to process coloured and textured glass by hand

applying safe handling requirements for equipment, products and materials, including the use of PPE

identifying and selecting materials to be used in the work process

using mathematical ideas and techniques to complete measurements, including calculating area and estimating material requirements

using tools and equipment in a safe and effective manner

completing straight cuts by hand and cutting simple shapes, truncated and radius corners and circles in annealed coloured and textured glass

calculating the cost of jobs

disposing of scrap and off-cuts in accordance with environmental guidelines and workplace procedures

communicating and working effectively and safely with others.

Evidence required to demonstrate the required knowledge for this unit must be relevant to and satisfy the requirements of the elements and performance criteria and include knowledge of:

safe work practices and procedures and use of PPE

qualities and characteristics of coloured and textured glass, including hazards and handling requirements

correct identification and use of glass cutting equipment, their functions and procedures for use

set-up and operation of glass cutting equipment, including procedures for reporting product defects or equipment faults

work flow requirements related to glass cutting

environmental protection requirements relating to the disposal of waste material

established communication channels and protocols.

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.
Unit context includes:	WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes and local safe operating procedures or equivalent work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements work requires individuals to demonstrate some discretion, judgement and problem solving
Materials include one (1) or more of the following:	annealed coloured and textured glass suitable for architectural and stained glass furniture applications and mirrors speciality glasses, including flash coloured glass and antique glass
Tools and equipment include:	flat felt covered cutting tables tungsten wheel glass cutters circle cutters L-squares and straight edges tape measures marking pens and chinagraph pencils templates and lubricants tables appropriate for cutting glass
Thin glass includes:	annealed coloured and textured glass of manufactured thickness
Glass processing by hand includes:	cutting shaping
PPE includes one (1) or more of the following:	That prescribed under legislation, regulations and enterprise policies and practices, including: gloves safety glasses gauntlets safety footwear earmuffs aprons and overalls
Information and procedures include one (1) or more of the following:	workplace procedures relating to the use and operation of tools and equipment and PPE workplace instructions including job sheets, cutting lists, plans, drawings and designs workplace procedures relating to reporting and communications manufacturer specifications and operational procedures