NTISthis.com

Evidence Guide: MSFUP2001 - Use upholstery sector hand and power tools

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFUP2001 - Use upholstery sector hand and power tools

What evidence can you provide to prove your understanding of each of the following citeria?

Identify hand and power tools

  1. Types of hand and power tools and their functions are identified
  2. Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  3. Sources of, and access to, power supply are recognised
Types of hand and power tools and their functions are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sources of, and access to, power supply are recognised

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and use hand tools

  1. Hand tools selected are consistent with needs of the job
  2. Selected hand tools are checked for serviceability and safety and any faults reported to supervisor in accordance with enterprise procedures
  3. Equipment is selected to hold or support material for hand tools application where applicable
  4. Material is located and held in position for hand tool application
  5. Hand tools are safely and effectively used according to their intended use
  6. Hand tools are safely located when not in immediate use
Hand tools selected are consistent with needs of the job

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Selected hand tools are checked for serviceability and safety and any faults reported to supervisor in accordance with enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is selected to hold or support material for hand tools application where applicable

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material is located and held in position for hand tool application

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hand tools are safely and effectively used according to their intended use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hand tools are safely located when not in immediate use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and use power tools

  1. Power tools are selected consistent with needs of the job in accordance with conventional work practice
  2. Power tools are visually checked for serviceability/safety in accordance with WHS requirements and any faults reported to supervisor in accordance with enterprise procedures
  3. Equipment is selected to hold or support materials for power tool application as applicable
  4. Material is located and held in position for power tool application as applicable
  5. Power tools are safely and effectively used in application processes
  6. Power tools are switched off and positioned safely when not in use
Power tools are selected consistent with needs of the job in accordance with conventional work practice

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Power tools are visually checked for serviceability/safety in accordance with WHS requirements and any faults reported to supervisor in accordance with enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is selected to hold or support materials for power tool application as applicable

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material is located and held in position for power tool application as applicable

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Power tools are safely and effectively used in application processes

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Power tools are switched off and positioned safely when not in use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean up work area and tools

  1. All tools are cleaned, maintained and stored
  2. Equipment is cleaned, maintained and stored
  3. Documentation is completed in accordance with enterprise procedures
All tools are cleaned, maintained and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is cleaned, maintained and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Documentation is completed in accordance with enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify hand and power tools

1.1

Types of hand and power tools and their functions are identified

1.2

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.3

Sources of, and access to, power supply are recognised

2

Select and use hand tools

2.1

Hand tools selected are consistent with needs of the job

2.2

Selected hand tools are checked for serviceability and safety and any faults reported to supervisor in accordance with enterprise procedures

2.3

Equipment is selected to hold or support material for hand tools application where applicable

2.4

Material is located and held in position for hand tool application

2.5

Hand tools are safely and effectively used according to their intended use

2.6

Hand tools are safely located when not in immediate use

3

Select and use power tools

3.1

Power tools are selected consistent with needs of the job in accordance with conventional work practice

3.2

Power tools are visually checked for serviceability/safety in accordance with WHS requirements and any faults reported to supervisor in accordance with enterprise procedures

3.3

Equipment is selected to hold or support materials for power tool application as applicable

3.4

Material is located and held in position for power tool application as applicable

3.5

Power tools are safely and effectively used in application processes

3.6

Power tools are switched off and positioned safely when not in use

4

Clean up work area and tools

4.1

All tools are cleaned, maintained and stored

4.2

Equipment is cleaned, maintained and stored

4.3

Documentation is completed in accordance with enterprise procedures

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify hand and power tools

1.1

Types of hand and power tools and their functions are identified

1.2

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.3

Sources of, and access to, power supply are recognised

2

Select and use hand tools

2.1

Hand tools selected are consistent with needs of the job

2.2

Selected hand tools are checked for serviceability and safety and any faults reported to supervisor in accordance with enterprise procedures

2.3

Equipment is selected to hold or support material for hand tools application where applicable

2.4

Material is located and held in position for hand tool application

2.5

Hand tools are safely and effectively used according to their intended use

2.6

Hand tools are safely located when not in immediate use

3

Select and use power tools

3.1

Power tools are selected consistent with needs of the job in accordance with conventional work practice

3.2

Power tools are visually checked for serviceability/safety in accordance with WHS requirements and any faults reported to supervisor in accordance with enterprise procedures

3.3

Equipment is selected to hold or support materials for power tool application as applicable

3.4

Material is located and held in position for power tool application as applicable

3.5

Power tools are safely and effectively used in application processes

3.6

Power tools are switched off and positioned safely when not in use

4

Clean up work area and tools

4.1

All tools are cleaned, maintained and stored

4.2

Equipment is cleaned, maintained and stored

4.3

Documentation is completed in accordance with enterprise procedures

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Identify each of the upholstery sector hand and power tools in the Range of Conditions and indicate their applications and limitations

Effectively and safely use the tools in their appropriate role in the workplace environment and maintain and safely store them

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Types, characteristics, uses, limitations and maintenance requirements of hand tools commonly used in furniture upholstery production

Types, characteristics, uses, limitations and maintenance requirements of power tools commonly used in furniture upholstery production

Workplace safety requirements and WHS legislation

Work flow within the workplace

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate skill, accuracy and dexterity in the application of tools to work tasks

Hand tools for furniture upholstery include:

shears/scissors

tape measure

rulers

staple remover

pincers

side cutters

pliers

hammer

screwdrivers and magnetic tack hammer

button press and cutters

knife (retractable blade)

needles (bag)

buttoning

regulator

drills

web strainer

ripping chisel

web pliers

bolt cutters

rotating hole punch

saws

hand planes

files and rasps

sockets

adjustable spanners

vices

clamps

wood chisels

nail punch

wire bender

seam stretcher

pipe/tube bender

stud press

pop rivet gun

no-sag spring benders (for shapes and ends)

hand ventilation setter

foam slicer

white rubber mallet

no-sag guillotine

soft tipped mallet

stuffing iron tack remover

cross pane hammer and tin snips

Power and pneumatic tools include:

spray adhesive system

staple gun

drills and screwdrivers

fabric cutter

nail gun

hot melt glue gun

buttoning machine

circular saw

drop saw

band saw

silicone cartridge gun

drill press

grinder

hot knife

electric iron

lacquer spray gun

knife fabric cutters (circular and straight)

electric/pneumatic foam cutter

planers and sanders

Fault reporting includes:

verbal or written reporting in conformance with workplace procedures

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures