NTISthis.com

Evidence Guide: MSFUP2003 - Apply contemporary foundations to upholstered furniture

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFUP2003 - Apply contemporary foundations to upholstered furniture

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Work order or instructions are used to confirm type of contemporary furniture foundations to be applied
  2. Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  3. Attaching methods are identified and fitting sequence is determined
  4. Suitable work area is selected and prepared
  5. Tools and hardware for the application of the foundation are selected and checked for safe operation
  6. Contemporary foundation components are selected, as required
Work order or instructions are used to confirm type of contemporary furniture foundations to be applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Attaching methods are identified and fitting sequence is determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Suitable work area is selected and prepared

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and hardware for the application of the foundation are selected and checked for safe operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Contemporary foundation components are selected, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Attach contemporary foundation

  1. Mounting points are measured and marked on the frame, as required
  2. Contemporary foundation is positioned and appropriate fasteners are used to secure it to the item
  3. The applied foundation is inspected for fit, finish and quality with those requiring reworking/refitting being tagged for further reprocessing or recycling/disposal in accordance with workplace practices
  4. Process is monitored and conditions which may affect quality standards are noted
  5. Variations to normal activities are reported in accordance with workplace procedures
  6. Authorised changes in standard operating procedures and work order or instructions are implemented
Mounting points are measured and marked on the frame, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Contemporary foundation is positioned and appropriate fasteners are used to secure it to the item

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

The applied foundation is inspected for fit, finish and quality with those requiring reworking/refitting being tagged for further reprocessing or recycling/disposal in accordance with workplace practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Process is monitored and conditions which may affect quality standards are noted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Variations to normal activities are reported in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Authorised changes in standard operating procedures and work order or instructions are implemented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work

  1. Workplace documentation, including stock usage, is completed in accordance with workplace procedures
  2. Faulty and/or defective equipment is tagged and reported in accordance with workplace procedures
  3. Waste and scrap are removed in accordance with workplace procedures
  4. Tools and equipment used are cleaned, inspected for serviceable condition and stored in accordance with workplace procedures
  5. Equipment is maintained and work area is cleaned in accordance with workplace procedures
Workplace documentation, including stock usage, is completed in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faulty and/or defective equipment is tagged and reported in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste and scrap are removed in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment used are cleaned, inspected for serviceable condition and stored in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is maintained and work area is cleaned in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Work order or instructions are used to confirm type of contemporary furniture foundations to be applied

1.2

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.3

Attaching methods are identified and fitting sequence is determined

1.4

Suitable work area is selected and prepared

1.5

Tools and hardware for the application of the foundation are selected and checked for safe operation

1.6

Contemporary foundation components are selected, as required

2

Attach contemporary foundation

2.1

Mounting points are measured and marked on the frame, as required

2.2

Contemporary foundation is positioned and appropriate fasteners are used to secure it to the item

2.3

The applied foundation is inspected for fit, finish and quality with those requiring reworking/refitting being tagged for further reprocessing or recycling/disposal in accordance with workplace practices

2.4

Process is monitored and conditions which may affect quality standards are noted

2.5

Variations to normal activities are reported in accordance with workplace procedures

2.6

Authorised changes in standard operating procedures and work order or instructions are implemented

3

Complete work

3.1

Workplace documentation, including stock usage, is completed in accordance with workplace procedures

3.2

Faulty and/or defective equipment is tagged and reported in accordance with workplace procedures

3.3

Waste and scrap are removed in accordance with workplace procedures

3.4

Tools and equipment used are cleaned, inspected for serviceable condition and stored in accordance with workplace procedures

3.5

Equipment is maintained and work area is cleaned in accordance with workplace procedures

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Work order or instructions are used to confirm type of contemporary furniture foundations to be applied

1.2

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.3

Attaching methods are identified and fitting sequence is determined

1.4

Suitable work area is selected and prepared

1.5

Tools and hardware for the application of the foundation are selected and checked for safe operation

1.6

Contemporary foundation components are selected, as required

2

Attach contemporary foundation

2.1

Mounting points are measured and marked on the frame, as required

2.2

Contemporary foundation is positioned and appropriate fasteners are used to secure it to the item

2.3

The applied foundation is inspected for fit, finish and quality with those requiring reworking/refitting being tagged for further reprocessing or recycling/disposal in accordance with workplace practices

2.4

Process is monitored and conditions which may affect quality standards are noted

2.5

Variations to normal activities are reported in accordance with workplace procedures

2.6

Authorised changes in standard operating procedures and work order or instructions are implemented

3

Complete work

3.1

Workplace documentation, including stock usage, is completed in accordance with workplace procedures

3.2

Faulty and/or defective equipment is tagged and reported in accordance with workplace procedures

3.3

Waste and scrap are removed in accordance with workplace procedures

3.4

Tools and equipment used are cleaned, inspected for serviceable condition and stored in accordance with workplace procedures

3.5

Equipment is maintained and work area is cleaned in accordance with workplace procedures

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Use contemporary foundation items to assemble contemporary foundations for a minimum of three (3) items of furniture, one (1) being a chair, requiring seat, back and arms

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Work flow in relation to furniture production

Features of range of contemporary foundation types and fittings

Materials used in the application of contemporary foundations

Identification of equipment, processes and procedures

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

Contemporary foundations include:

elastic webbing

nylon webbing

no-sag springs

conical springs

pulma flex

plastic and styrene edging

foam and polyester fibre

Tools and equipment include:

scissors

upholstery hammer

nail gun

staple gun

pincers

long-nose pliers and tape measures

Materials include:

elastic webbing

nylon webbing

coil springs

spiral springs

no-sag springs

pulma flex

plastic and styrene edging

foam

hessian and polyester fibre

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices:

safety glasses/goggle

hair nets

ear muffs/plugs

gloves

footwear and protective clothing

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures