NTISthis.com

Evidence Guide: MSFUP3002 - Fit and apply final cover materials to furniture using basic techniques

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFUP3002 - Fit and apply final cover materials to furniture using basic techniques

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Specifications concerning design, fabrics, accessories and finish are confirmed with designer/customer/client, as required
  2. Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  3. Materials, work method and sequence are determined
  4. Suitable work area is selected, prepared and cleaned of any contaminants
  5. Appropriate equipment and tools are selected and checked for safe operation
  6. Furniture frames/foundations are checked for quality of construction, contaminants and appropriateness to specifications, and modified and/or repaired in accordance with workplace procedures
  7. Material panels are checked in terms of quantity, quality, contaminants, size, pattern and consistency
  8. Trims are selected and checked in terms of quantity, quality, contaminants, size, pattern and consistency
Specifications concerning design, fabrics, accessories and finish are confirmed with designer/customer/client, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials, work method and sequence are determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Suitable work area is selected, prepared and cleaned of any contaminants

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate equipment and tools are selected and checked for safe operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Furniture frames/foundations are checked for quality of construction, contaminants and appropriateness to specifications, and modified and/or repaired in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material panels are checked in terms of quantity, quality, contaminants, size, pattern and consistency

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trims are selected and checked in terms of quantity, quality, contaminants, size, pattern and consistency

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fit and apply fabric

  1. Work pieces are laid out in sequence according to specifications, construction process and workplace procedures
  2. Materials are applied to furniture in accordance with enterprise and industry standards
  3. Material is secured to the foundation, using appropriate fixing processes
  4. Finish of applied material is checked against quality standards
Work pieces are laid out in sequence according to specifications, construction process and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials are applied to furniture in accordance with enterprise and industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material is secured to the foundation, using appropriate fixing processes

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Finish of applied material is checked against quality standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fit and apply fabric and trim

  1. Trims are applied consistent with specifications and workplace procedures
  2. Trims are checked against quality standards and reprocessed, if required, in accordance with workplace procedures
  3. Final adjustments are made to ensure finish meets required quality standards
Trims are applied consistent with specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trims are checked against quality standards and reprocessed, if required, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Final adjustments are made to ensure finish meets required quality standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work

  1. Finished product is packaged, protected and stored, as required, consistent with workplace procedures
  2. Workplace documentation is completed in accordance with procedures
  3. Waste and scrap are collected for disposal/recycling in accordance with workplace procedures
  4. Tools and equipment used are cleaned, inspected for serviceability and stored in accordance with workplace procedures
  5. Equipment is maintained and work area is cleaned in accordance with workplace procedures
Finished product is packaged, protected and stored, as required, consistent with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is completed in accordance with procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste and scrap are collected for disposal/recycling in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment used are cleaned, inspected for serviceability and stored in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is maintained and work area is cleaned in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Specifications concerning design, fabrics, accessories and finish are confirmed with designer/customer/client, as required

1.2

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.3

Materials, work method and sequence are determined

1.4

Suitable work area is selected, prepared and cleaned of any contaminants

1.5

Appropriate equipment and tools are selected and checked for safe operation

1.6

Furniture frames/foundations are checked for quality of construction, contaminants and appropriateness to specifications, and modified and/or repaired in accordance with workplace procedures

1.7

Material panels are checked in terms of quantity, quality, contaminants, size, pattern and consistency

1.8

Trims are selected and checked in terms of quantity, quality, contaminants, size, pattern and consistency

2

Fit and apply fabric

2.1

Work pieces are laid out in sequence according to specifications, construction process and workplace procedures

2.2

Materials are applied to furniture in accordance with enterprise and industry standards

2.3

Material is secured to the foundation, using appropriate fixing processes

2.4

Finish of applied material is checked against quality standards

3

Fit and apply fabric and trim

3.1

Trims are applied consistent with specifications and workplace procedures

3.2

Trims are checked against quality standards and reprocessed, if required, in accordance with workplace procedures

3.3

Final adjustments are made to ensure finish meets required quality standards

4

Complete work

4.1

Finished product is packaged, protected and stored, as required, consistent with workplace procedures

4.2

Workplace documentation is completed in accordance with procedures

4.3

Waste and scrap are collected for disposal/recycling in accordance with workplace procedures

4.4

Tools and equipment used are cleaned, inspected for serviceability and stored in accordance with workplace procedures

4.5

Equipment is maintained and work area is cleaned in accordance with workplace procedures

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Specifications concerning design, fabrics, accessories and finish are confirmed with designer/customer/client, as required

1.2

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.3

Materials, work method and sequence are determined

1.4

Suitable work area is selected, prepared and cleaned of any contaminants

1.5

Appropriate equipment and tools are selected and checked for safe operation

1.6

Furniture frames/foundations are checked for quality of construction, contaminants and appropriateness to specifications, and modified and/or repaired in accordance with workplace procedures

1.7

Material panels are checked in terms of quantity, quality, contaminants, size, pattern and consistency

1.8

Trims are selected and checked in terms of quantity, quality, contaminants, size, pattern and consistency

2

Fit and apply fabric

2.1

Work pieces are laid out in sequence according to specifications, construction process and workplace procedures

2.2

Materials are applied to furniture in accordance with enterprise and industry standards

2.3

Material is secured to the foundation, using appropriate fixing processes

2.4

Finish of applied material is checked against quality standards

3

Fit and apply fabric and trim

3.1

Trims are applied consistent with specifications and workplace procedures

3.2

Trims are checked against quality standards and reprocessed, if required, in accordance with workplace procedures

3.3

Final adjustments are made to ensure finish meets required quality standards

4

Complete work

4.1

Finished product is packaged, protected and stored, as required, consistent with workplace procedures

4.2

Workplace documentation is completed in accordance with procedures

4.3

Waste and scrap are collected for disposal/recycling in accordance with workplace procedures

4.4

Tools and equipment used are cleaned, inspected for serviceability and stored in accordance with workplace procedures

4.5

Equipment is maintained and work area is cleaned in accordance with workplace procedures

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Fit and apply a patterned fabric cover to a drop-in seat

Fit and apply a cover in a plain material other than fabric for a seat, back and arms of a chair

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Work requirements, including workplace standards

Work flow in relation to applying final material covers to furniture

Material types and characteristics, common faults and inspection procedures

Types of basic techniques and their application

Design features of the finished furnishing items

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving

Final cover materials include:

plain and patterned fabrics

vinyl and velvet

Tools and equipment include:

sewing machine

needles

scissors

staple gun

hammer

tack hammer and glue gun

Other materials include:

piping

double piping

cords

gimp

glues

staples

buttons

tacks

tingles and antique nails

Material application requirements include:

ensuring that patterns, naps/pile, sheens, direction of pattern, pattern repeat and finished side of the materials are positioned appropriate to the design

the smooth and consistent finish of the material over the furniture foundation

weaving lines are straight and square to each other

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices:

safety glasses/goggle

hair nets

ear muffs/plugs

gloves

footwear and protective clothing

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures

customer requirements