Critical aspects for assessment and evidence required to demonstrate competency in this unit | Assessors should ensure that candidates can: follow required policies and procedures to maintain the integrity of collected samples or equipment during transport deal with customers effectively and courteously work safely maintain confidentiality and report problems, accidents and incidents in accordance with procedures.
|
Context of and specific resources for assessment | This unit of competency is to be assessed in the workplace or simulated workplace environment. This unit of competency may be assessed with: MSL943002A Participate in laboratory/field workplace safety. Resources may include: vehicle enterprise procedures for the handling and transport of samples or equipment communication devices sample containers containers for transporting samples and test/calibration equipment.
|
Method of assessment | The following assessment methods are suggested: review of the job sheets or journal of completed activities direct observation of work as a courier the quality of review of results traceable to the transport of samples or equipment by candidate oral or written questions to assess knowledge of the handling of unforseen circumstances simulated role plays between a courier and personnel at a reception desk or customer pickup centre. In all cases, practical assessment should be supported by questions to assess underpinning knowledge and those aspects of competency which are difficult to assess directly. Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability. Access must be provided to appropriate learning and/or assessment support when required. The language, literacy and numeracy demands of assessment should not be greater than those required to undertake the unit of competency in a work like environment.
|
This competency in practice | Industry representatives have provided the case studies below to illustrate the practical application of this unit of competency and show its relevance in a workplace setting. Calibration Calibration laboratories must take special care to ensure that they do not damage test equipment during handling, testing or storage. Information relating to equipment requiring special handling, transport or storage conditions should be provided to those responsible for collecting and transporting the items. A customer-orientated calibration laboratory offers a door to door calibration service to most of its clients. Once a week their driver arrives at a major facility and takes delivery of several precision measuring instruments. As always, the driver signs the acceptance note paying particular attention that all the items are recorded correctly, including listing all accessories and associated handbooks. But this time, two delicate items require unique transit cases to ensure they are stored and transported upright. Because the laboratory received prior notice, these cases were loaded into the van before setting off as well as a copy of the special transport and packaging instructions. The driver secures all the items in accordance with the accompanied written instructions to ensure their safe travel and minimise damage during transit. Upon return, the driver unloads the van and the instruments are acquitted by administration staff, inspected for damage and booked into the laboratory. The lab supervisor makes sure that their technicians are aware of the special handling requirements of the two delicate instruments. Biotechnology During transit, samples must be handled and maintained under conditions which will ensure that their potency and efficacy are maintained. A courier has been asked to transport vaccine samples from the airport to the enterprise for laboratory evaluation. The supervisor faxes the courier company detailed instructions regarding pickup and handling/storage conditions during transit. In this case, the samples are in insulated containers and the temperature is monitored and recorded continuously. The courier collects the samples, puts them in the coolest part of the vehicle, ensuring that the package will not be subject to any sudden jolts, and transports them to the enterprise. After the samples arrive they are checked by the enterprise and appropriate documentation completed. Biomedical At 8 am the courier commences the day shift. The shift supervisor identifies the collection centres to be visited. The courier takes the mobile phone from the charger and checks their pager. In the vehicle, the courier logs in the odometer reading, makes a mental note of the fuel level, checks the cooler boxes and other equipment and carefully drives out. Today, there are pickups from four private hospitals and 12 collecting centres in a 200 sq km zone. As they approach the first hospital, there is a call from base with instructions to collect a tissue biopsy and bring it back immediately. He/she asks the base contact to tell haematology that their 10 am specimen arrival will be 40 minutes late because of this unforseen diversion. Eventually, they complete the round, having remembered to replenish specimen collecting stock at each centre visited. Environmental (1) A technical assistant regularly handles and transports sensitive equipment over rough terrain in a 4WD vehicle. After reaching a field site, they are asked to transport expensive water monitoring equipment across an estuary in a small aluminium boat. The assistant notes that the equipment boxes are open to the weather and will need to be made waterproof. Because the water is choppy, the assistant adds extra packing material to cushion the most shock sensitive items. They choose to travel with the equipment rather than entrusting it to the local fisherman. Together, they carefully secure the items on the seats rather than placing them on the floor of the boat which is wet. Environmental (2) A waste management authority has sent one of their laboratory technicians to collect six containers that have been found by a member of the public on the verge of an industrial area service road. Given that the materials may be hazardous the technician assembles a full set of safety equipment. They also locate a laptop computer with MSDS information, a list of phone contacts for agencies responsible for handling hazardous materials and suitable containers for storing/transporting potentially hazardous materials. Upon arrival at the site, the technician locates six containers of concentrated sulphuric acid which are clearly labelled. The technician consults the MSDS for information on appropriate handling, storage and transportation procedures and follows them closely.
|