The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to install floors
|
|
Identify floor installation requirements from job instructions Completed |
Evidence:
|
Select and check all required tools and equipment are ready to use Completed |
Evidence:
|
Gather floor, floor covering and other items required by job specifications, and check they meet quality requirements and are ready for installation Completed |
Evidence:
|
Identify hazards and hazard controls and check the hazard controls are in place and operating Completed |
Evidence:
|
Secure the chassis and check it and the work area are ready for installing the floor Completed |
Evidence:
|
Cut the floor material according to job specifications and workplace procedures Completed |
Evidence:
|
Fabricate and install wheel arches according to workplace procedures Completed |
Evidence:
|
Apply adhesive to the chassis according to manufacturer’s instructions Completed |
Evidence:
|
Lift and align the floor in the correct position using lifting equipment and safe manual handling practices Completed |
Evidence:
|
Fix the floor to the chassis or other support according to workplace procedures Completed |
Evidence:
|
Trim off excess and finish fitting the floor to meet quality requirements Completed |
Evidence:
|
Measure and cut the floor covering according to job instructions Completed |
Evidence:
|
Place, align and fit the floor covering in position Completed |
Evidence:
|
Apply adhesives according to the manufacturer’s instructions and safety requirements Completed |
Evidence:
|
Fix the floor covering to the floor and wheel arches according to workplace procedures Completed |
Evidence:
|
Trim off excess and finish laying the floor covering to meet quality requirements Completed |
Evidence:
|
Complete the installations according to workplace procedures
|
|
Clean up the recreational vehicle in readiness for the next task Completed |
Evidence:
|
Clean up the work area, identify items for recycling and dispose of waste Completed |
Evidence:
|
Identify, tag and report any damage to equipment and tools Completed |
Evidence:
|
Check, clean and do routine maintenance on equipment and tools and store them and unused materials Completed |
Evidence:
|
Complete task outcome documentation Completed |
Evidence:
|