The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Assist with preliminary site study
|
|
Locate and review relevant legislative, regulatory and/or planning requirements and register for contaminated sites. Completed |
Evidence:
|
Confirm the site location, scope and purpose of the investigation and assigned tasks with supervisor. Completed |
Evidence:
|
Source and review available site data, including site history, geology, hydrogeology and meteorology data. Completed |
Evidence:
|
Summarise information to assist with preparation of a site chronology and identification of gaps or inadequacies in data, potential contaminants and areas of possible contamination. Completed |
Evidence:
|
Prepare for site activities
|
|
Confirm the scope and purpose of sampling, testing and/or monitoring activities and data requirements with supervisor. Completed |
Evidence:
|
Liaise with site controller to access site, identify locations of services and arrange for induction, clearances and/or permits, as necessary. Completed |
Evidence:
|
Review risks posed by site contaminants and review the health and safety plan/safe work procedures specified for planned activities. Completed |
Evidence:
|
Confirm the sampling/test methods, sampling/test points, numbers and types of samples and/or measurements with supervisor. Completed |
Evidence:
|
Review specified sampling/test methods with close attention to the sequence of steps and details for each. Completed |
Evidence:
|
Check the operation/calibration of required sampling equipment, test and/or monitoring instruments in accordance with relevant methods, standards and manufacturer instructions. Completed |
Evidence:
|
Ensure all required reagents, solutions and/or calibration standards are obtained and ready for field use. Completed |
Evidence:
|
Assemble and safely stow all sampling equipment, test instruments, materials, containers, safety equipment and personal protective equipment (PPE). Completed |
Evidence:
|
Arrange suitable transport to, from and around site, as required. Completed |
Evidence:
|
Assist with site inspection
|
|
Sketch, map and/or photograph the site features. Completed |
Evidence:
|
Conduct a visual inspection to identify site features that may inform the need for and design of subsequent investigations. Completed |
Evidence:
|
Collect preliminary samples, as directed, to help characterise possible contamination hazards prior to detailed investigations. Completed |
Evidence:
|
Conduct sampling as directed
|
|
Locate sampling/test points and any services at the site. Completed |
Evidence:
|
Work effectively with other site personnel during drilling excavation and/or survey operations to collect reliable samples, logs and measurements, as necessary. Completed |
Evidence:
|
Follow specified procedures to minimise hazards and/or contamination of samples, self/others, equipment and environment. Completed |
Evidence:
|
Collect and preserve required samples in accordance with sampling plan, relevant methods and/or standards. Completed |
Evidence:
|
Record all information and label samples in accordance with traceability requirements. Completed |
Evidence:
|
Record environmental conditions and/or atypical observations made during sampling that may impact on validity or integrity of samples. Completed |
Evidence:
|
Store and transport all samples back to base in accordance with specified method, chain of custody requirements and relevant codes. Completed |
Evidence:
|
Conduct field tests and/or monitoring as directed
|
|
Obtain sample or sub-sample for designated field test. Completed |
Evidence:
|
Check that all equipment, instruments, reagents and calibration standards are fit for purpose. Completed |
Evidence:
|
Set up and calibrate instruments as necessary to ensure safe operation and valid results. Completed |
Evidence:
|
Operate equipment/instruments in accordance with test method requirements. Completed |
Evidence:
|
Follow specified procedures to minimise hazards and/or contamination of samples, self/others, equipment and environment. Completed |
Evidence:
|
Perform required measurements and tests on all samples and standards, if appropriate, in accordance with specified methods. Completed |
Evidence:
|
Keep accurate, complete and traceable records of all field observations and test results. Completed |
Evidence:
|
Clean, decontaminate and/or dispose of contaminated equipment and materials
|
|
Inspect equipment to assess the degree of contamination. Completed |
Evidence:
|
Use specified procedures to remove material from the exposed outer surfaces of sampling/test equipment and PPE. Completed |
Evidence:
|
Use specified procedures and reagents to neutralise, wash and/or rinse exposed surfaces. Completed |
Evidence:
|
Collect rinsate blanks for analysis and preserve/store in accordance with specified procedure or standard. Completed |
Evidence:
|
Stow items for transport only when thoroughly dry. Completed |
Evidence:
|
Safely collect all debris and sullage from decontamination in accordance with relevant regulations and codes. Completed |
Evidence:
|
Finalise site activities
|
|
Arrange for the safe disposal of all hazardous wastes in accordance with relevant regulations and codes. Completed |
Evidence:
|
Ensure all site observations, sampling/test data and results are accurately transferred to the workplace information management system. Completed |
Evidence:
|
Store samples in accordance with method, chain of custody requirements and relevant codes, as necessary. Completed |
Evidence:
|
Ensure samples are dispatched for analytical testing within recommended holding times. Completed |
Evidence:
|
Process and interpret data
|
|
Review test/monitoring data noting atypical observations. Completed |
Evidence:
|
Calculate required quantities using relevant test method and ensure values are consistent with expectations. Completed |
Evidence:
|
Estimate and document uncertainty of measurement in accordance with workplace procedures, if required. Completed |
Evidence:
|
Record processed results in accordance with workplace procedures. Completed |
Evidence:
|
Interpret trends in data and/or results and report atypical results promptly to appropriate personnel. Completed |
Evidence:
|
Determine if obvious procedure or equipment problems have led to atypical data or results. Completed |
Evidence:
|
Compare results with established threshold levels or environmental quality concentration limits, if relevant. Completed |
Evidence:
|
Finalise reporting of results in accordance with workplace requirement. Completed |
Evidence:
|
Maintain a safe work environment
|
|
Clean all equipment, containers, work area and vehicles according to workplace procedures. Completed |
Evidence:
|
Check serviceability of all equipment before storage. Completed |
Evidence:
|
Use defined safe work practices and PPE to ensure personal safety and that of others. Completed |
Evidence:
|
Minimise the generation of wastes and environment impacts. Completed |
Evidence:
|