NTISthis.com

Evidence Guide: MSTCL3004 - Press whole garments

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSTCL3004 - Press whole garments

What evidence can you provide to prove your understanding of each of the following citeria?

Determine job requirements

  1. Follow standard operating procedures (SOPs)
  2. Comply with work health and safety (WHS) requirements at all times
  3. Use appropriate personal protective equipment (PPE) in accordance with SOPs
  4. Identify job requirements from specifications, drawings, job sheets or work instructions
Follow standard operating procedures (SOPs)

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Comply with work health and safety (WHS) requirements at all times

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use appropriate personal protective equipment (PPE) in accordance with SOPs

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify job requirements from specifications, drawings, job sheets or work instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to press garment

  1. Prepare work area and pressing equipment
  2. Clean, check and perform routine maintenance on pressing equipment
  3. Lay out work in correct proximity and sequence
  4. Quality check garment, identify faults, spots and marks and take appropriate follow-up action
Prepare work area and pressing equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean, check and perform routine maintenance on pressing equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Lay out work in correct proximity and sequence

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Quality check garment, identify faults, spots and marks and take appropriate follow-up action

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Press garment

  1. Select and use appropriate attachments
  2. Sequence and position work on pressing equipment according to product requirements
  3. Apply heat, steam, vacuum, pressure and time according to product requirements and fabric specifications
  4. Control equipment and handle work to suit variations in fabric, work type, construction and pressing requirements
Select and use appropriate attachments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sequence and position work on pressing equipment according to product requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply heat, steam, vacuum, pressure and time according to product requirements and fabric specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Control equipment and handle work to suit variations in fabric, work type, construction and pressing requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Despatch pressed garment

  1. Inspect pressed garment and compare against workplace pressing standards
  2. Report and record results of inspection and subsequent action to correct faulty work
  3. Record any preventative action taken to avoid any recurrence of faulty work
  4. Hang, pack and direct pressed garment to required despatch area, despatch storage or packing sections
Inspect pressed garment and compare against workplace pressing standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Report and record results of inspection and subsequent action to correct faulty work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Record any preventative action taken to avoid any recurrence of faulty work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hang, pack and direct pressed garment to required despatch area, despatch storage or packing sections

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, drawings, job sheets or work instructions

2

Prepare to press garment

2.1

Prepare work area and pressing equipment

2.2

Clean, check and perform routine maintenance on pressing equipment

2.3

Lay out work in correct proximity and sequence

2.4

Quality check garment, identify faults, spots and marks and take appropriate follow-up action

3

Press garment

3.1

Select and use appropriate attachments

3.2

Sequence and position work on pressing equipment according to product requirements

3.3

Apply heat, steam, vacuum, pressure and time according to product requirements and fabric specifications

3.4

Control equipment and handle work to suit variations in fabric, work type, construction and pressing requirements

4

Despatch pressed garment

4.1

Inspect pressed garment and compare against workplace pressing standards

4.2

Report and record results of inspection and subsequent action to correct faulty work

4.3

Record any preventative action taken to avoid any recurrence of faulty work

4.4

Hang, pack and direct pressed garment to required despatch area, despatch storage or packing sections

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, drawings, job sheets or work instructions

2

Prepare to press garment

2.1

Prepare work area and pressing equipment

2.2

Clean, check and perform routine maintenance on pressing equipment

2.3

Lay out work in correct proximity and sequence

2.4

Quality check garment, identify faults, spots and marks and take appropriate follow-up action

3

Press garment

3.1

Select and use appropriate attachments

3.2

Sequence and position work on pressing equipment according to product requirements

3.3

Apply heat, steam, vacuum, pressure and time according to product requirements and fabric specifications

3.4

Control equipment and handle work to suit variations in fabric, work type, construction and pressing requirements

4

Despatch pressed garment

4.1

Inspect pressed garment and compare against workplace pressing standards

4.2

Report and record results of inspection and subsequent action to correct faulty work

4.3

Record any preventative action taken to avoid any recurrence of faulty work

4.4

Hang, pack and direct pressed garment to required despatch area, despatch storage or packing sections

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include:

reading and following work instructions, standard operating procedures (SOPs), safe work practices

applying relevant standards

preparing work area and pressing equipment, and lay out work in correct proximity and sequence

checking work against specifications and pressing instructions, identifying faults, spots and marks, and taking appropriate follow-up action

sequencing and positioning work on pressing equipment according to product requirements

using at least three (3) different types of pressing equipment to apply heat, steam, vacuum, pressure and time according to product requirements and fabric specifications

controlling equipment and handling work to suit variations in fabric, work type, construction and pressing requirements, for at least three (3) different garments and two (2) fabric types

inspecting pressed work, comparing against workplace pressing standards, and reporting and recording results and subsequent action to correct faulty work

recording any preventative action taken to avoid any recurrence of faulty work

hanging, packing and directing pressed garment to required despatch area, despatch storage or packing sections.

Evidence must be provided that demonstrates knowledge of:

safe work practices and procedures and use of personal protective equipment (PPE)

relevant Australian Standards

pressing requirements and characteristics of a variety of fabrics and other materials used in garment assembly

pressing equipment

quality standards and practices

workplace procedures

recording and reporting practices.

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Workplace procedures include one or more of the following:

requirements prescribed by legislation, awards, agreements and conditions of employment

SOPs

work instructions

oral, written and visual communication

quality practices, including responsibility for maintenance of own work quality and contribution to quality improvement of team or section output

housekeeping

tasks related to environmental protection, waste disposal, pollution control and recycling

WHS practices

Australian Standards include:

the relevant industry or Australian Standards that are current at the time this unit is being undertaken

Pressing equipment includes three or more of the following:

irons

presses

industrial steam irons

suction boards

sleeve board

sleeve roll

tailor's ham

tailor's mitt

velvet pin board

Routine minor maintenance includes one or more of the following:

washing out or replacing cover and padding

shaking out rubber mat

brushing and air-blowing wire mesh

applying sole-cleaning compounds to hand irons

Garment includes three or more of the following:

shirts

trousers

dresses

skirts

tailored jackets

evening wear

Fabric includes two or more of the following:

wool suiting

satin

velvet

chiffon

silks

linen

lace

Report and record includes one or more of the following:

written records

shown by the attachment of a ticket

oral or written reports