NTISthis.com

Evidence Guide: MSTGN2007 - Select, transfer and remove materials and products

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSTGN2007 - Select, transfer and remove materials and products

What evidence can you provide to prove your understanding of each of the following citeria?

Determine job requirements

  1. Follow standard operating procedures (SOPs)
  2. Comply with work health and safety (WHS) requirements at all times
  3. Use appropriate personal protective equipment (PPE) in accordance with SOPs
  4. Identify job requirements from specifications, drawings, job sheets or work instructions
Follow standard operating procedures (SOPs)

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Comply with work health and safety (WHS) requirements at all times

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use appropriate personal protective equipment (PPE) in accordance with SOPs

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify job requirements from specifications, drawings, job sheets or work instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Determine requirements

  1. Review work requests and confirm requirements
  2. Organise, confirm and record tasks according to specified procedures
  3. Select, check and correctly use relevant personal and other safety equipment, where needed
  4. Identify and organise appropriate equipment for transferring materials
Review work requests and confirm requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Organise, confirm and record tasks according to specified procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select, check and correctly use relevant personal and other safety equipment, where needed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and organise appropriate equipment for transferring materials

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select materials and products

  1. Interpret documentation and identify codes and references indicating source, customer, storage location or batch, where relevant
  2. Identify and select materials or products to be loaded or unloaded
  3. Document and report non-conforming materials and products
  4. Update transfer and store documentation
Interpret documentation and identify codes and references indicating source, customer, storage location or batch, where relevant

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and select materials or products to be loaded or unloaded

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Document and report non-conforming materials and products

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Update transfer and store documentation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Load, unload and transfer materials or products

  1. Use suitable equipment (other than forklift) to load and unload materials according to materials handling requirements, safe work practices and correct manual handling techniques
  2. Transfer materials to correct destination
  3. Apply environmental requirements and procedures concerned with waste, pollution and recycling of materials at all stages of the process
  4. Maintain and clean materials, equipment and work environment
  5. Complete relevant documentation associated with tasks
Use suitable equipment (other than forklift) to load and unload materials according to materials handling requirements, safe work practices and correct manual handling techniques

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Transfer materials to correct destination

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply environmental requirements and procedures concerned with waste, pollution and recycling of materials at all stages of the process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain and clean materials, equipment and work environment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete relevant documentation associated with tasks

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, drawings, job sheets or work instructions

2

Determine requirements

2.1

Review work requests and confirm requirements

2.2

Organise, confirm and record tasks according to specified procedures

2.3

Select, check and correctly use relevant personal and other safety equipment, where needed

2.4

Identify and organise appropriate equipment for transferring materials

3

Select materials and products

3.1

Interpret documentation and identify codes and references indicating source, customer, storage location or batch, where relevant

3.2

Identify and select materials or products to be loaded or unloaded

3.3

Document and report non-conforming materials and products

3.4

Update transfer and store documentation

4

Load, unload and transfer materials or products

4.1

Use suitable equipment (other than forklift) to load and unload materials according to materials handling requirements, safe work practices and correct manual handling techniques

4.2

Transfer materials to correct destination

4.3

Apply environmental requirements and procedures concerned with waste, pollution and recycling of materials at all stages of the process

4.4

Maintain and clean materials, equipment and work environment

4.5

Complete relevant documentation associated with tasks

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, drawings, job sheets or work instructions

2

Determine requirements

2.1

Review work requests and confirm requirements

2.2

Organise, confirm and record tasks according to specified procedures

2.3

Select, check and correctly use relevant personal and other safety equipment, where needed

2.4

Identify and organise appropriate equipment for transferring materials

3

Select materials and products

3.1

Interpret documentation and identify codes and references indicating source, customer, storage location or batch, where relevant

3.2

Identify and select materials or products to be loaded or unloaded

3.3

Document and report non-conforming materials and products

3.4

Update transfer and store documentation

4

Load, unload and transfer materials or products

4.1

Use suitable equipment (other than forklift) to load and unload materials according to materials handling requirements, safe work practices and correct manual handling techniques

4.2

Transfer materials to correct destination

4.3

Apply environmental requirements and procedures concerned with waste, pollution and recycling of materials at all stages of the process

4.4

Maintain and clean materials, equipment and work environment

4.5

Complete relevant documentation associated with tasks

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include:

reading and following work instructions, standard operating procedures (SOPs), safe work practices

applying relevant standards

interpreting work orders and industry documentation

identifying and locating materials and products

using suitable equipment (other than forklift) to load and unload materials according to materials handling requirements, safe work practices and correct manual handling techniques

loading/unloading and transporting materials and products on at least two (2) occasions

documenting and reporting non-conforming materials and products

maintaining clean equipment, machines and work environment

applying workplace procedures

completing relevant documentation and maintaining records.

Evidence must be provided that demonstrates knowledge of:

safe work practices and procedures and use of personal protective equipment (PPE)

relevant Australian Standards

use of products and materials

procedures to handle products and materials

materials handling requirements

correct manual handling techniques

procedures to use required equipment

despatch and receival procedures

loading and unloading procedures

industry documentation and work orders

cleaning of machines and equipment

workplace procedures

recording and reporting practices.

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Workplace procedures include one or more of the following:

requirements prescribed by legislation, awards, agreements and conditions of employment

SOPs

work instructions

oral, written and visual communication

quality practices, including responsibility for maintenance of own work quality and contribution to quality improvement of team or section output

housekeeping

tasks related to environmental protection, waste disposal, pollution control and recycling

WHS practices

Australian Standards include:

the relevant industry or Australian Standards that are current at the time this unit is being undertaken

Equipment includes, but is not limited to, one or more of the following:

hand and power tools

pallet truck and hand trolleys

overhead cranes