NTISthis.com

Evidence Guide: MSTML2005 - Place and cut millinery patterns

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSTML2005 - Place and cut millinery patterns

What evidence can you provide to prove your understanding of each of the following citeria?

Determine job requirements

  1. Follow standard operating procedures (SOPs)
  2. Comply with work health and safety (WHS) requirements at all times
  3. Use appropriate personal protective equipment (PPE) in accordance with SOPs
  4. Identify job requirements from specifications, drawings, job sheets or work instructions
Follow standard operating procedures (SOPs)

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Comply with work health and safety (WHS) requirements at all times

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use appropriate personal protective equipment (PPE) in accordance with SOPs

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify job requirements from specifications, drawings, job sheets or work instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to cut millinery patterns

  1. Select and prepare tools, equipment and work area according to workplace procedures
  2. Select and prepare millinery patterns and materials
  3. Check patterns and materials against specifications and quality standards
  4. Identify special placement and cutting requirements of materials
Select and prepare tools, equipment and work area according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and prepare millinery patterns and materials

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check patterns and materials against specifications and quality standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify special placement and cutting requirements of materials

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Lay out millinery materials and patterns

  1. Lay out a single ply of materials in accordance with specifications and placement and cutting requirements
  2. Lay out multiple plies of materials in accordance with specifications and placement and cutting requirements
  3. Manipulate patterns according to specifications
  4. Transfer pattern shapes to material ready for cutting
Lay out a single ply of materials in accordance with specifications and placement and cutting requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Lay out multiple plies of materials in accordance with specifications and placement and cutting requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manipulate patterns according to specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Transfer pattern shapes to material ready for cutting

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cut out millinery shapes and finalise work

  1. Cut material using cutting equipment suited to the requirements of the millinery item
  2. Cut straight lines, curves and angles accurately and smoothly
  3. Inspect cut pieces for quality and rectify cutting faults
Cut material using cutting equipment suited to the requirements of the millinery item

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cut straight lines, curves and angles accurately and smoothly

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspect cut pieces for quality and rectify cutting faults

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, drawings, job sheets or work instructions

2

Prepare to cut millinery patterns

2.1

Select and prepare tools, equipment and work area according to workplace procedures

2.2

Select and prepare millinery patterns and materials

2.3

Check patterns and materials against specifications and quality standards

2.4

Identify special placement and cutting requirements of materials

3

Lay out millinery materials and patterns

3.1

Lay out a single ply of materials in accordance with specifications and placement and cutting requirements

3.2

Lay out multiple plies of materials in accordance with specifications and placement and cutting requirements

3.3

Manipulate patterns according to specifications

3.4

Transfer pattern shapes to material ready for cutting

4

Cut out millinery shapes and finalise work

4.1

Cut material using cutting equipment suited to the requirements of the millinery item

4.2

Cut straight lines, curves and angles accurately and smoothly

4.3

Inspect cut pieces for quality and rectify cutting faults

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, drawings, job sheets or work instructions

2

Prepare to cut millinery patterns

2.1

Select and prepare tools, equipment and work area according to workplace procedures

2.2

Select and prepare millinery patterns and materials

2.3

Check patterns and materials against specifications and quality standards

2.4

Identify special placement and cutting requirements of materials

3

Lay out millinery materials and patterns

3.1

Lay out a single ply of materials in accordance with specifications and placement and cutting requirements

3.2

Lay out multiple plies of materials in accordance with specifications and placement and cutting requirements

3.3

Manipulate patterns according to specifications

3.4

Transfer pattern shapes to material ready for cutting

4

Cut out millinery shapes and finalise work

4.1

Cut material using cutting equipment suited to the requirements of the millinery item

4.2

Cut straight lines, curves and angles accurately and smoothly

4.3

Inspect cut pieces for quality and rectify cutting faults

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include:

reading and following work instructions, standard operating procedures (SOPs), safe work practices

selecting and identifying millinery patterns, shapes and templates

selecting appropriate millinery materials and fabrications

laying out millinery materials and fabrications in accordance with specifications and placement and cutting requirements

placing patterns and templates on millinery materials and fabrications on at least two (2) occasions

cutting straight lines, concave and convex curves, obtuse and acute angles, on at least two (2) occasions, according to requirements

recognising and rectifying cutting faults to satisfy quality standards.

Evidence must be provided that demonstrates knowledge of:

safe work practices and procedures and use of personal protective equipment (PPE)

range of millinery materials, fabrications and their characteristics:

linings

millinery fabrications

foundation fabrics

flat materials

moulded materials

interlinings and interfacings

woven

non-woven

knitted

trimming materials

single ply

multiple plies

given specifications

pattern shapes for millinery

tools and equipment used in millinery patternmaking:

pins

marking pencil or pen

fabric weights

millinery pattern specification sheets

manipulation:

grain

matching material pattern

nap

efficient yield

placing patterns on material to meet specifications and requirements:

pinning

outlining

using pattern weights

using cutting equipment:

scissors

roller blade cutter

Stanley knife

electric cutter

cutting mat

workplace procedures.

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Workplace procedures include one or more of the following:

requirements prescribed by legislation, awards, agreements and conditions of employment

SOPs

work instructions

PPE

oral, written and visual communication

quality practices, including responsibility for maintenance of own work quality and contribution to quality improvement of team or section output

housekeeping

tasks related to environmental protection, waste disposal, pollution control and recycling

WHS practices

Selected and checked includes one or more of the following:

collating pieces

checking for completeness

interpreting labelling

interpreting markings

identifying notches

interpreting cutting instructions

Quality standards include one or more of the following:

fabric faults

smooth cutting

notches cut

correct grain

shapes match

nap correct

Special placement and cutting requirements include one or more of the following:

handling

directional (nap, grain and irregularities in thickness and colour of fabrication)

stretch and stability

print placement and matching