NTISthis.com

Evidence Guide: MSTTF2015 - Install products on and off site

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSTTF2015 - Install products on and off site

What evidence can you provide to prove your understanding of each of the following citeria?

Determine job requirements

  1. Follow standard operating procedures (SOPs)
  2. Comply with work health and safety (WHS) requirements at all times
  3. Use appropriate personal protective equipment (PPE) in accordance with SOPs
  4. Identify job requirements from specifications, drawings, job sheets or work instructions
Follow standard operating procedures (SOPs)

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Comply with work health and safety (WHS) requirements at all times

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use appropriate personal protective equipment (PPE) in accordance with SOPs

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify job requirements from specifications, drawings, job sheets or work instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for installation

  1. Read and interpret workplace procedures and instructions, including interpreting drawings and technical information to guide installation
  2. Plan task operation sequence, identify suitable electrical power outlets and equipment to work above ground, as required
  3. Arrange additional assistance, if required
  4. Select and prepare appropriate tools and prepare site
Read and interpret workplace procedures and instructions, including interpreting drawings and technical information to guide installation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plan task operation sequence, identify suitable electrical power outlets and equipment to work above ground, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Arrange additional assistance, if required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and prepare appropriate tools and prepare site

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to work above ground

  1. Select, secure and adequately support ladders or other devices, such as steps or bosun's chair, as required for the tasks
  2. Erect appropriate barriers and signs when working overhead
  3. Obtain assistance, as necessary, when working above the ground or deck
Select, secure and adequately support ladders or other devices, such as steps or bosun's chair, as required for the tasks

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Erect appropriate barriers and signs when working overhead

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Obtain assistance, as necessary, when working above the ground or deck

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fit products

  1. Use appropriate marking tools and measuring equipment to mark out fitting positions
  2. Check products to be installed to ensure they meet specifications and are fit for their intended purpose
  3. Use appropriate ladders or other devices to gain height advantage
  4. Sequence all operations according to specifications and workplace procedures ,as required, to complete a normal installation
  5. Apply appropriate WHS precautions and environmental practices during all phases of the installation
  6. Work in cooperation with other team members, as required, to fit products
Use appropriate marking tools and measuring equipment to mark out fitting positions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check products to be installed to ensure they meet specifications and are fit for their intended purpose

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use appropriate ladders or other devices to gain height advantage

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sequence all operations according to specifications and workplace procedures ,as required, to complete a normal installation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply appropriate WHS precautions and environmental practices during all phases of the installation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work in cooperation with other team members, as required, to fit products

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspect and check quality

  1. Inspect completed work to verify that the products and installation work meet job specifications and relevant workplace and industry quality standards
  2. Check that installation is correct, and that products fit and operate correctly
  3. Determine if any re-work or rectification is required, undertake re-work or take other appropriate action
Inspect completed work to verify that the products and installation work meet job specifications and relevant workplace and industry quality standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check that installation is correct, and that products fit and operate correctly

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Determine if any re-work or rectification is required, undertake re-work or take other appropriate action

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Provide customer information and finalise work

  1. Supply customer with information on how to use product, as required
  2. Demonstrate product to customer and answer questions within scope of own responsibility
  3. Clean work area, clean and return tools to safe storage, and perform normal basic maintenance, in accordance with workplace procedures
  4. Clean and stow away ladders, bosun's chair or other equipment
  5. Complete project documentation and obtain customer signature, if required
Supply customer with information on how to use product, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Demonstrate product to customer and answer questions within scope of own responsibility

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean work area, clean and return tools to safe storage, and perform normal basic maintenance, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean and stow away ladders, bosun's chair or other equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete project documentation and obtain customer signature, if required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, drawings, job sheets or work instructions

2

Prepare for installation

2.1

Read and interpret workplace procedures and instructions, including interpreting drawings and technical information to guide installation

2.2

Plan task operation sequence, identify suitable electrical power outlets and equipment to work above ground, as required

2.3

Arrange additional assistance, if required

2.4

Select and prepare appropriate tools and prepare site

3

Prepare to work above ground

3.1

Select, secure and adequately support ladders or other devices, such as steps or bosun's chair, as required for the tasks

3.2

Erect appropriate barriers and signs when working overhead

3.3

Obtain assistance, as necessary, when working above the ground or deck

4

Fit products

4.1

Use appropriate marking tools and measuring equipment to mark out fitting positions

4.2

Check products to be installed to ensure they meet specifications and are fit for their intended purpose

4.3

Use appropriate ladders or other devices to gain height advantage

4.4

Sequence all operations according to specifications and workplace procedures ,as required, to complete a normal installation

4.5

Apply appropriate WHS precautions and environmental practices during all phases of the installation

4.6

Work in cooperation with other team members, as required, to fit products

5

Inspect and check quality

5.1

Inspect completed work to verify that the products and installation work meet job specifications and relevant workplace and industry quality standards

5.2

Check that installation is correct, and that products fit and operate correctly

5.3

Determine if any re-work or rectification is required, undertake re-work or take other appropriate action

6

Provide customer information and finalise work

6.1

Supply customer with information on how to use product, as required

6.2

Demonstrate product to customer and answer questions within scope of own responsibility

6.3

Clean work area, clean and return tools to safe storage, and perform normal basic maintenance, in accordance with workplace procedures

6.4

Clean and stow away ladders, bosun's chair or other equipment

6.5

Complete project documentation and obtain customer signature, if required

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, drawings, job sheets or work instructions

2

Prepare for installation

2.1

Read and interpret workplace procedures and instructions, including interpreting drawings and technical information to guide installation

2.2

Plan task operation sequence, identify suitable electrical power outlets and equipment to work above ground, as required

2.3

Arrange additional assistance, if required

2.4

Select and prepare appropriate tools and prepare site

3

Prepare to work above ground

3.1

Select, secure and adequately support ladders or other devices, such as steps or bosun's chair, as required for the tasks

3.2

Erect appropriate barriers and signs when working overhead

3.3

Obtain assistance, as necessary, when working above the ground or deck

4

Fit products

4.1

Use appropriate marking tools and measuring equipment to mark out fitting positions

4.2

Check products to be installed to ensure they meet specifications and are fit for their intended purpose

4.3

Use appropriate ladders or other devices to gain height advantage

4.4

Sequence all operations according to specifications and workplace procedures ,as required, to complete a normal installation

4.5

Apply appropriate WHS precautions and environmental practices during all phases of the installation

4.6

Work in cooperation with other team members, as required, to fit products

5

Inspect and check quality

5.1

Inspect completed work to verify that the products and installation work meet job specifications and relevant workplace and industry quality standards

5.2

Check that installation is correct, and that products fit and operate correctly

5.3

Determine if any re-work or rectification is required, undertake re-work or take other appropriate action

6

Provide customer information and finalise work

6.1

Supply customer with information on how to use product, as required

6.2

Demonstrate product to customer and answer questions within scope of own responsibility

6.3

Clean work area, clean and return tools to safe storage, and perform normal basic maintenance, in accordance with workplace procedures

6.4

Clean and stow away ladders, bosun's chair or other equipment

6.5

Complete project documentation and obtain customer signature, if required

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include:

reading and following work instructions, standard operating procedures (SOPs), safe work practices

applying relevant standards

complying with all relevant safety requirements, including safe use of ladders, bosun's chair, load hoisting equipment and electrical equipment

interpreting work orders, drawings and installation instructions

complying with product and equipment specifications during installation

performing normal installation and setting of products and equipment on at least two (2) occasions

using relevant hand and power tools safely

inspecting and testing operation of installed products and equipment

specifying any rectification necessary

performing normal operator maintenance of work area to enable work to be conducted safely and efficiently

communicating effectively with client on installation process and product operation

demonstrating products to customer, answering questions, completing project documentation and obtaining customer signature, if required, according to workplace procedures.

Evidence must be provided that demonstrates knowledge of:

safe work practices and procedures and use of personal protective equipment (PPE)

relevant Australian Standards

electrical and general workplace hazards and means of identifying them

operating principles of products and associated equipment to be installed

the range of hand tools, power tools, measuring devices and other equipment used in the installation process, and their operating principles and appropriateness for particular applications

power sources, such as single phase, three phase and weather-protected outlets

format of product and equipment specifications

setting and adjustment principles and processes for products and equipment being installed

typical problems of products and associated equipment and their rectification procedures

relevant product quality standards for products and equipment installed

work health and safety (WHS) and environmental requirements of relevant industry and workplace procedures, including use of equipment for working aloft

general housekeeping policies and procedures

mathematical processes used in the installation and checking processes

WHS practices, including hazard identification and control measures

quality practices

workplace procedures

recording and reporting practices.

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Workplace procedures include one or more of the following:

requirements prescribed by legislation, awards, agreements and conditions of employment

SOPs

work instructions

oral, written and visual communication

quality practices, including responsibility for maintenance of own work quality and contribution to quality improvement of team or section output

housekeeping

tasks related to environmental protection, waste disposal, pollution control and recycling

WHS practices

Australian Standards include:

the relevant industry or Australian Standards that are current at the time this unit is being undertaken

Products include one or more of the following:

blinds

awnings

annexes

sails

Tools include one or more of the following:

hand tools:

hammers

punches

hand drills

saws

hacksaws

rasps

wire brushes

pop-rivets

expanding bolts

power tools:

portable electric drills

routers

portable sanders

abrasive disk cutting equipment

electric punches

Normal installation includes one or more of the following

using appropriate tools to drill and prepare locating holes

safely lifting or lowering products into position

using appropriate fastenings to attach or anchor product

fitting pulleys or sheave blocks

threading or attaching ropes or cables, as necessary

fitting stays or other fastenings

cleaning up work area after fitting

WHS practices

WHS practices include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and include one or more of the following:

manual handling techniques

SOPs

PPE

safe materials handling

taking of rest breaks

ergonomic arrangement of workplaces

following marked walkways

safe storage of equipment

housekeeping

reporting accidents and incidents

environmental practices