NTISthis.com

Evidence Guide: MSTTN2010 - Apply laminations or fusible interlinings to technical textiles

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSTTN2010 - Apply laminations or fusible interlinings to technical textiles

What evidence can you provide to prove your understanding of each of the following citeria?

Determine job requirements

  1. Follow standard operating procedures (SOPs)
  2. Comply with work health and safety (WHS) requirements at all times
  3. Use appropriate personal protective equipment (PPE) in accordance with SOPs
  4. Identify job requirements from specifications, drawings, job sheets or work instructions
Follow standard operating procedures (SOPs)

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Comply with work health and safety (WHS) requirements at all times

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use appropriate personal protective equipment (PPE) in accordance with SOPs

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify job requirements from specifications, drawings, job sheets or work instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare technical textile for laminating or application of fusible interlining

  1. Make appropriate checks to ensure that textile fabrics are ready for laminating or application of fusible interlining
  2. Prepare work area according to WHS practices and workplace procedures
  3. Obtain or prepare solvent, powder or hot melt adhesive according to manufacturer instructions and specifications required for job
  4. Report and record problems according to workplace procedures
Make appropriate checks to ensure that textile fabrics are ready for laminating or application of fusible interlining

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare work area according to WHS practices and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Obtain or prepare solvent, powder or hot melt adhesive according to manufacturer instructions and specifications required for job

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Report and record problems according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare technical textile for lamination or insertion of interlining

  1. Conduct appropriate tests on technical textile before lamination or fusing of interlining, as required
  2. Fix technical textile into position on machine or conveyor, as required.
  3. Check job or batch requirements according to enterprise procedures
Conduct appropriate tests on technical textile before lamination or fusing of interlining, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fix technical textile into position on machine or conveyor, as required.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check job or batch requirements according to enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operate and monitor laminating or fusible interlining machine

  1. Preform coating material into a continuous sheet for laminating to substrate either by application of heat or by use of an adhesive, as required
  2. Apply solvent, powder, hot melt adhesive or continuous lamination sheet to technical textile or fusible interlining
  3. Monitor coating process to ensure application is according to job requirements and manufacturer instructions
  4. Set machine variables according to process and job requirements
  5. Remove laminated or interlined technical textile from coating machine and conduct tests, as required
  6. Direct technical textile to next operation
Preform coating material into a continuous sheet for laminating to substrate either by application of heat or by use of an adhesive, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply solvent, powder, hot melt adhesive or continuous lamination sheet to technical textile or fusible interlining

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor coating process to ensure application is according to job requirements and manufacturer instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set machine variables according to process and job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove laminated or interlined technical textile from coating machine and conduct tests, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Direct technical textile to next operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, drawings, job sheets or work instructions

2

Prepare technical textile for laminating or application of fusible interlining

2.1

Make appropriate checks to ensure that textile fabrics are ready for laminating or application of fusible interlining

2.2

Prepare work area according to WHS practices and workplace procedures

2.3

Obtain or prepare solvent, powder or hot melt adhesive according to manufacturer instructions and specifications required for job

2.4

Report and record problems according to workplace procedures

3

Prepare technical textile for lamination or insertion of interlining

3.1

Conduct appropriate tests on technical textile before lamination or fusing of interlining, as required

3.2

Fix technical textile into position on machine or conveyor, as required.

3.3

Check job or batch requirements according to enterprise procedures

4

Operate and monitor laminating or fusible interlining machine

4.1

Preform coating material into a continuous sheet for laminating to substrate either by application of heat or by use of an adhesive, as required

4.2

Apply solvent, powder, hot melt adhesive or continuous lamination sheet to technical textile or fusible interlining

4.3

Monitor coating process to ensure application is according to job requirements and manufacturer instructions

4.4

Set machine variables according to process and job requirements

4.5

Remove laminated or interlined technical textile from coating machine and conduct tests, as required

4.6

Direct technical textile to next operation

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, drawings, job sheets or work instructions

2

Prepare technical textile for laminating or application of fusible interlining

2.1

Make appropriate checks to ensure that textile fabrics are ready for laminating or application of fusible interlining

2.2

Prepare work area according to WHS practices and workplace procedures

2.3

Obtain or prepare solvent, powder or hot melt adhesive according to manufacturer instructions and specifications required for job

2.4

Report and record problems according to workplace procedures

3

Prepare technical textile for lamination or insertion of interlining

3.1

Conduct appropriate tests on technical textile before lamination or fusing of interlining, as required

3.2

Fix technical textile into position on machine or conveyor, as required.

3.3

Check job or batch requirements according to enterprise procedures

4

Operate and monitor laminating or fusible interlining machine

4.1

Preform coating material into a continuous sheet for laminating to substrate either by application of heat or by use of an adhesive, as required

4.2

Apply solvent, powder, hot melt adhesive or continuous lamination sheet to technical textile or fusible interlining

4.3

Monitor coating process to ensure application is according to job requirements and manufacturer instructions

4.4

Set machine variables according to process and job requirements

4.5

Remove laminated or interlined technical textile from coating machine and conduct tests, as required

4.6

Direct technical textile to next operation

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include:

reading and following work instructions, standard operating procedures (SOPs), safe work practices

applying relevant standards

safely and accurately preparing and loading consumables on at least three (3) occasions

safely setting and operating technical textile laminating or interlining machines on at least three (3) occasions

monitoring coating process to ensure application is according to job requirements and manufacturer instructions on at least three (3) occasions

removing laminated or interlined technical textile from coating machine and conducting tests, as required

consistently achieving quality and production output requirements

identifying and responding to machine or process faults

following job specifications and orders

applying workplace procedures

maintaining records.

Evidence must be provided that demonstrates knowledge of:

safe work practices and procedures and use of personal protective equipment (PPE)

relevant Australian Standards

laminating process: the production of a textile by combining two or more fabrics using an adhesive

adhesives (solvent, powder or hot melt adhesives)

interlining processes: a fusible interlining is a fabric that has been coated with an adhesive coating, which under the influence of heat and pressure will melt and form a bond with any other fabric that is pressed against it

machine operations relevant to workplace procedures

process and machine faults

work health and safety (WHS) practices

quality practices

workplace procedures

recording and reporting practices.

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Workplace procedures include one or more of the following:

requirements prescribed by legislation, awards, agreements and conditions of employment

SOPs

work instructions

oral, written and visual communication

quality practices, including responsibility for maintenance of own work quality and contribution to quality improvement of team or section output

housekeeping

tasks related to environmental protection, waste disposal, pollution control and recycling

WHS practices

Australian Standards include:

the relevant industry or Australian Standards that are current at the time this unit is being undertaken

Machine variables include one or more of the following:

setting of height adjustments

setting of temperature and timer controls for heating and cooling elements

setting of roller controls after heating zone for linear pressure

level adjustments of calibrating rollers for precise calibration

conveyor belt controls for speed and direction

WHS practices

WHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and include one or more of the following:

manual handling techniques

SOPs

PPE

safe materials handling

taking of rest breaks

ergonomic arrangement of workplaces

following marked walkways

safe storage of equipment

housekeeping

reporting accidents and incidents

other WHS practices relevant to the job and enterprise