The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for work
|
|
Receive and give shift handover Completed |
Evidence:
|
Identify work requirements Completed |
Evidence:
|
Identify and control hazards Completed |
Evidence:
|
Coordinate with appropriate personnel Completed |
Evidence:
|
Check for recent work undertaken on plant item Completed |
Evidence:
|
Note any outstanding/incomplete work Completed |
Evidence:
|
Check operational status of extruder system Completed |
Evidence:
|
Operate extrusion system in accordance with procedures
|
|
Identify the type of extruder, the ancillaries and their duty Completed |
Evidence:
|
Complete routine checks, logs and paperwork taking appropriate action on unexpected readings Completed |
Evidence:
|
Adjust extrusion system to achieve required output rate and quality with maximum plant efficiency Completed |
Evidence:
|
Change rate, grade or specification smoothly Completed |
Evidence:
|
Recognise and take action on abnormal situations in accordance with procedures
|
|
Monitor extrusion system frequently and critically throughout shift using measured/indicated data and senses Completed |
Evidence:
|
Inspect pellet/granule properties and recognise and correct problems Completed |
Evidence:
|
Identify impacts of any changes upstream and downstream Completed |
Evidence:
|
Recognise situations which may require action Completed |
Evidence:
|
Resolve routine problems Completed |
Evidence:
|
Take actions on other abnormal situations to make safe and have the situation resolved Completed |
Evidence:
|
Isolate and de-isolate extruder system
|
|
Complete any required pre-start checks. Completed |
Evidence:
|
Start up/shut down extrusion system according to the plant type and duty in liaison with other personnel Completed |
Evidence:
|
Isolate extrusion system Completed |
Evidence:
|
Make safe for required work Completed |
Evidence:
|
Check extrusion system is ready to be returned to service Completed |
Evidence:
|
De-isolate and prepare extrusion system for return to service Completed |
Evidence:
|
Change production rates and/or product grade/specification
|
|
Predict from rates and schedule when a transition will be required Completed |
Evidence:
|
Clean extrusion equipment to requirements according to procedures Completed |
Evidence:
|
Manage transitions smoothly and in a timely manner Completed |
Evidence:
|
Minimise scrap/off grade as a result of a transition Completed |
Evidence:
|